Brake Pad Specifications:

  • Premium Posi Ceramic Brake Pad
  • 4 Piece front brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a Pair
    • Fits both LH (Driver Side) & RH (Passenger Side) Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 8 Stud Wheels
  • 13.03"(330 mm) diameter
  • Vented
  • 13mm Thick Hub Flange
  • Direct replacement
  • Built to strict quality control standards

Wheel Bearing & Hub Assembly Specifications:

  • Comes as a Pair
    • Fits both LH (Driver Side) & RH (Passenger Side) Front
  • 4 Bolt Rectangular Flange
  • Fits 8 Lug Wheel
  • Includes ABS sensor
  • Studs already installed
  • Direct replacements
  • Built to strict quality control standards

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Precision Engineered:

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.
100% Factory tested to precise OEM tolerances.

Highest Quality Materials:

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement:

Guaranteed to fit and function correctly for your specific application.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Rotor Coating: Zinc Coated
  • Brake Pad Bonding Type: Premium Posi
  • Brake Rotor Type: Cross Drilled & Slotted
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Product Line: Performance
  • Kit Includes: (2) Front Hub Assemblies

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:49)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the 21mm lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:16)
    • Remove the two 17mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pull the two springs off of the brake pads
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (2:16)
    • Remove the two 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Strike the rotor with a hammer to loosen it
    • Pull the rotor off
  4. step : Preparing the New Brake Pads and Rotors (2:50)
    • Clean the rotor with brake parts cleaner
    • Apply grease to the brake pad tabs
    • Apply grease to the caliper slides
  5. step : Installing the New Brake Rotor (4:06)
    • Slide the rotor on
    • Put the bracket back into place
    • Start the two 21mm bolts by hand
    • Tighten the 21mm bolts to 100 foot-pounds of torque
  6. step : Installing the New Brake Pads (4:40)
    • Install the new brake pads into the bracket
    • Push on the brake pad springs
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread the two 17mm bolts by hand
    • Tighten the 17mm bolts to 60 foot-pounds
  7. step : Reattaching the Wheel (6:13)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (7:11)
    • Check the brake fluid level
    • Add brake fluid if necessary
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Large C-Clamp
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Cloth Rags
  • Brake Parts Cleaner
  • Bearing Grease
  • Brake Fluid

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2002Ford Excursion Ford Excursion 4 Wheel Drive 4 Wheel ABS Brakes Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake & Wheel Bearing Kit for Models with Fine Thread Wheel Studs Performance
2003-2005Ford Excursion Ford Excursion 4 Wheel Drive 4 Wheel ABS Brakes Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake & Wheel Bearing Kit Performance
2003-2004Ford F250 Super Duty Truck Ford F250 Super Duty Truck 4 Wheel Drive 4 Wheel ABS Brakes Front Cross Drilled & Slotted Zinc Coated Ceramic Premium Posi Brake & Wheel Bearing Kit Performance Fine Thread Wheel Studs
2003-2004Ford F350 Super Duty Truck Ford F350 Super Duty Truck 4 Wheel Drive 4 Wheel ABS Brakes Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake & Wheel Bearing Kit for Models with 13" (330mm) Diameter Rotors Performance Fine Thread Wheel Studs

This part replaces:

  • Reference Number 379 515056
  • Reference Number CD824
  • Hollander 538-1494*
  • OE # 3C34 2B513 BC
Part #: 1ABMS00093


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:45 min)