Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

These replacement exterior door handles are just what you need to get your vehicle in good working form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Black textured finish
  • Durable construction
  • Steel center rod and return spring
  • Direct replacements for original handles
  • Do not fit rear doors

These exterior door handles are direct bolt on and are built to strict quality control standards. They are great replacements and have substantial cost savings over dealer units.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (1:20)
    • Using a paperclip pry out the clip behind the window crank.
    • Remove the Phillips screw behind the door handle.
    • Remove the door handle bezel.
    • Remove the two 10mm bolts under the door pull.
    • Use a putty knife to pry out the clips around the door panel.
    • Lift the door panel up and off.
    • Pull back the water shield.
  2. step : Removing the Exterior Door Handle (2:21)
    • Make sure the window is all the way up.
    • Remove the plastic cap on the outside edge of the door.
    • Remove the two 10mm bolts on the backside of the door handle.
    • Reach up on the inside of the door and push the rod out of the clip.
    • Pull the door handle out and disconnect the other rod.
    • Pull the door handle out.
  3. step : Replacing the Exterior Door Handle (5:00)
    • Put the door handle up into place.
    • Replace the two 10mm bolts.
    • Reconnect the rods to the back of the handle.
    • Replace the plastic cap.
  4. step : Replacing the Door Panel (6:45)
    • Line up the door panel and push it into place.
    • Hit the clips in around the door panel.
    • Replace the door handle bezel
    • Replace the two 10mm bolts.
    • Replace the Phillips screw.
    • Put the clip back into place on the window crank and push the crank into place.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Paper Clip

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2005Chevy Blazer S10 Chevy Blazer S10 Exterior Door Handle Pair Front
1998-2004Chevy S10 Pickup Chevy S10 Pickup Exterior Door Handle Pair Front
1998-2001GMC Jimmy S-15 GMC Jimmy S-15 Exterior Door Handle Pair Front
1998-2004GMC S-15 Sonoma GMC S-15 Sonoma Exterior Door Handle Pair Front
1996-2000Isuzu Hombre Isuzu Hombre Exterior Door Handle Pair Front
1998-2002Oldsmobile Bravada Olds Bravada Exterior Door Handle Pair Front
Part #: 1ADHS00100


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:05 min)