Specifications:

  • LH (Driver Side) FRONT OUTER
  • Injection molded black plastic
  • Durable construction
  • Steel center rod and return spring
  • Direct replacement for original handle

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:57)
    • Disconnect the negative battery cable with an 8mm wrench
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the door lock wiring harness
    • Disconnect the window switch wiring harnesses
    • Disconnect the mirror switch wiring harness
    • Pry out the courtesy light
    • Disconnect the courtesy light wiring harness
    • Pry off the trim piece around the door handle with a flat blade screwdriver
    • Disconnect the wiring harnesses
    • Remove the Phillips head screw inside the courtesy light
    • Remove the Phillips head screw inside the door pull
    • Lift the door panel up and off
    • Disconnect the speaker wiring lead
    • Remove the orange safety clip from the air bag wiring harness
    • Disconnect the air bag wiring harness
    • Remove the four 10mm bolts from the side airbag
    • Disconnect the air bag sensor wiring harness
    • Remove the two 10mm nuts from the sensor
    • Carefully peel off the water shield
  2. step : Removing the Outside Door Handle (5:24)
    • Remove the two clips from the door lock rods
    • Remove the lock rods from the door handle
    • Remove the two 10mm bolts from the outside door handle
    • Pull the handle down and out
    • Remove the 10mm nut from the lock cylinder
    • Remove the lock cylinder
  3. step : Installing the Outside Door Handle (7:05)
    • Insert the lock cylinder into the new door handle
    • Tighten the 10mm nut to the lock cylinder
    • Insert the lock first and push the door handle into the door
    • Insert the two 10mm bolts to the door handle
    • Connect the door latch rod to the outside door handle
  4. step : Reinstalling the Door Panel (8:38)
    • Put the water shield into place
    • Connect the air bag module
    • Insert the 10mm bolts to the air bag
    • Insert the two 10mm bolt to the sensor
    • Connect the air bag sensor wiring harness
    • Connect the air bag wiring harness
    • Connect the orange safety pin to the wiring harness
    • Connect the speaker wiring lead
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips head screw into the door pull
    • Insert the Phillips head screw into the courtesy light
    • Connect the courtesy light wiring harness
    • Push in the courtesy light
    • Connect the wiring harnesses to the door handle trim piece
    • Push on the door handle trim piece
    • Connect the door lock wiring harness
    • Connect the window switch wiring harnesses
    • Connect the mirror switch wiring harness
    • Push in the window switch panel
    • Connect the negative battery cable with an 8mm wrench

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

  • Wrenches - Metric

  • 8mm Wrench
  • 10mm Wrench

4.3 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
1
0
0
It fit good but !
It wasn't exact fix, it was for olds 88 LSS , the spring was on the other side compared to the original and there is no place for a switch that turns the interior lights on when you left the handle so I had to do away with the switch. There are pins that stick out so the switch can connect to , to hold it in place . Would have given it five stars but nothing said couldn't be use with this switch.
December 4, 2017
Purchased
6 months ago
Outside Door Handle for 1999 Oldsmobile 88
Handle is working well. Was well made, but somewhat harder to install than the video available on the 1A site showed. The video was for a 1997 Cadillac with larger doors than the Olds 88 which allowed access to the handle inside the door by rolling the window all the way up. By doing that on the Olds, you blocked access to the outside handle inside the door making it necessary to get at the fasteners on the outside handle behind the window, which is quite difficult. Aside from this, the handle itself was a good product and has worked well since then.
October 24, 2017
Purchased
8 months ago
Excellent video and part
Excellent video... it was right on and saved me a great deal of time... the part fit perfect...done in 45 minutes.
September 11, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1992-1997 Buick Skylark Front Exterior Door Handle Driver Side
  • 1994-1999 Cadillac Deville Front Exterior Door Handle Driver Side
  • 1992-2002 Cadillac Eldorado Front Exterior Door Handle Driver Side
  • 1994-1997 Cadillac Seville Front Exterior Door Handle Driver Side
  • 1992-1999 Olds 88 Front Exterior Door Handle Driver Side
  • 1991-1996 Olds 98 Front Exterior Door Handle Driver Side
  • 1991-1996 Olds 98-Regency Front Exterior Door Handle Driver Side
  • 1992-1998 Olds Achieva Front Exterior Door Handle Driver Side
  • 1992-1999 Olds Delta 88 Front Exterior Door Handle Driver Side
  • 1992-1999 Olds Delta 88-Royale Front Exterior Door Handle Driver Side
  • 1993-1999 Pontiac Bonneville Front Exterior Door Handle Driver Side
  • 1992-1998 Pontiac Grand Am Front Exterior Door Handle Driver Side

This part replaces:

  • Partslink GM1310124
  • Dorman 77732
  • OE # 12482413, 16619641, 16628299
Part #: 1ADHE00289

Out of Stock

How-to Video:

(12:12 min)