Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Location:   Lower

This replacement oil pan is among the highest quality replacements on the market. It's just what you need to get your engine in good working order again!


  • Stamped steel construction, like the original
  • Replaces dealer part numbers: YS4Z-6675-AA, YS4Z6675AA
  • Direct bolt on replacement
  • Built to strict quality control standards
  • Includes oil drain plug
  • Gasket not included

Replace your leaking or damaged oil pan now with this great fitting alternative. It makes a great replacement and has good cost savings over a dealer unit.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Oil Pan (0:23)
    • Raise and support the car with a jack and jack stands
    • Remove the oil drain plug with a 13mm socket and ratchet
    • Drain all the oil
    • Reinstall the drain plug finger tight
    • Remove all the 8mm bolts around the oil pan
    • Use a pry bar to break the oil pan lose
    • Pull the oil pan straight down and wiggle it out
    • Clean off the residue gasket on the engine block
  2. step : Reinstalling the Oil Pan (5:03)
    • Wipe the new oil pan to clean the gasket surface
    • Put a small bead of RTV around the pan
    • Wipe the engine block to remove any oil residue and debris
    • Carefully reposition the pan on the engine
    • Get a few bolts started to hold it in place
    • Reinstall the rest of the bolts by hand
    • Snug all the bolts from the center out in a cross pattern
    • Check that the drain plug is tight
    • Let dry for at least 20 minutes before adding oil
  3. step : Adding Oil (9:28)
    • Pull the hood release lever
    • Release the safety latch
    • Insert the prop rod
    • Remove the oil fill cap
    • Add the appropriate amount of oil
    • Reinstall the oil fill cap
    • Start the car for a few seconds
    • Shut it off and let it sit for a minute
    • Pull the dipstick out and check the oil level
    • Add oil if necessary
    • Close the hood

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Pick

  • Materials, Fluids, and Supplies

  • RTV

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 8mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2004Ford Escape Ford Escape Lower Engine Oil Pan L4 2.0L
2000-2004Ford Focus Ford Focus Lower Engine Oil Pan L4 2.0L DOHC (8th Vin Digit 3)
2002-2004Ford Focus Ford Focus SVT Lower Engine Oil Pan L4 2.0L DOHC (8th Vin Digit 5)
2001-2004Mazda Tribute Mazda Tribute Lower Engine Oil Pan L4 2.0L
Part #: 1AEOP00113

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:53 min)