Engine Mount - 1AEMT00027

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This replacement motor mount is just what you need to keep your motor firm in place!


  • RH (Passenger Side) FRONT mount
  • No modifications needed
  • Replaces dealer part number: 22146738
  • Direct replacement (insert only)
  • Your motor has 2 mounts to secure it
  • We recommend replacing them in pairs for best results

Replace your broken engine mount now with this great fitting aftermarket part. It makes a great replacement and has good cost savings over a dealer unit.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Support your engine (1:13)
    • Find the lift point for the engine underneath the vehicle and set up a jack.
  2. step : Remove the radiator coolant bottle (1:30)
    • Use a flat blade screwdriver to pry up the clips.
    • Use a 10 mm socket and ratchet to remove the one bolt anchoring it.
    • Move the radiator coolant bottle out of the way.
  3. step : Remove the engine mount (2:00)
    • Remove the seven 15 mm nuts and bolts using a socket, extension and ratchet to do this.
    • Work the mount out of the engine bay, it might take some finesse.
    • Twist off the big clip from the motor mount and set aside.
    • Remove the 15 mm bolts and drill out the rivets to remove the mount from its bracket.
  4. step : Install the new motor mount. (4:45)
    • Assemble your motor mount and bracket.
    • Finesse the motor mount assembly into the engine bay and line up the bolt points.
    • Bolt all the 15 mm bolts down.
    • Torque them to 50 foot lbs.
    • Clip the radiator reservoir back into place and bolt in the 10 mm bolt.

Tools needed for replacement:

    Allen Wrenches

  • 5/64 Allen Wrench
  • 5mm Allen Wrench
  • 5/16 Inch Allen Wrench
  • 8mm Allen Wrench
  • 3/8 Inch Allen Wrench
  • 7mm Allen Wrench

  • Drills, Drill Bits & Related

  • Drill
  • 9/16 Inch Drill Bit

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket
  • 15mm Socket

  • Wrenches - SAE

  • 1/2 Inch Wrench

5.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Total satisfaction
Easy ordering, tracking a breeze, correct part and fit, whole procedure a piece of cake, will use them again . Have a late model olds that I use for work.
September 19, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1992-1997Buick Skylark Buick Skylark Front Engine Mount Passenger Side
1992-1996Chevy Beretta Chevy Beretta Front Engine Mount Passenger Side
1995-2002Chevy Cavalier Chevy Cavalier Front Engine Mount Passenger Side
1992-1996Chevy Corsica Chevy Corsica Front Engine Mount Passenger Side
1993Chevy Lumina Chevy Lumina Front Engine Mount Passenger Side
1992-1998Oldsmobile Achieva Olds Achieva Front Engine Mount Passenger Side
1992-1998Pontiac Grand Am Pontiac Grand Am Front Engine Mount Passenger Side
1995-2002Pontiac Sunfire Pontiac Sunfire Front Engine Mount Passenger Side
Part #: 1AEMT00027

Out of Stock

How-to Video:

(09:50 min)