Electric Fuel Pump TRQ

This replacement electric fuel pump is just what you need to get your vehicle in good working order again!

Specifications:

• Mounts in the tank
• Direct replacement
• Built to strict quality control standards

This electric fuel pump makes a great replacement and has good cost savings over a dealer unit.

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Meets or exceeds all SAE fuel pump performance and durability standards

Consistent high quality plastic molding media.

High-carbon motor commutator and brushes for longer pump life

Guaranteed to fit and function correctly for your specific application

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

step : Accessing the Fuel Pump (1:22)

• Pop out the rear seat bench
• Push the seat belts through the holes in the seat cushion
• Pull out the rear seat
• Pry up the fuel pump service cover with a flat blade screwdriver

step : Removing the Fuel Sending Unit (2:02)

• Disconnect the fuel sending unit wiring harness
• Remove the two 8mm bolts from the sending unit bracket
• Pull the fuel line off its connector
• Put the fuel hose aside
• Remove the six 8mm bolts from the sending unit cap
• Remove the fuel sending unit from the vehicle

step : Removing the Fuel Pump (3:05)

• Remove the cap from the sending unit
• Pry the lower housing off the fuel pump
• Pry the upper housing off the fuel pump
• Disconnect the fuel pump wiring harness
• Remove the pump from the housing
• Pry the metal snap clip off the fuel pump, if necessary
• Remove the filter from the pump, if necessary

step : Installing the Fuel Pump (6:50)

• Remove the top cap from the new fuel pump
• Slide the black spacer onto the fuel pump
• Slide an o-ring onto the fuel pump
• Snap on the adapter fitting
• Remove the bottom cap from the fuel pump
• Slide the new fuel strainer into the fuel pump
• Snap the wire retainer onto the fuel pump
• Put the fuel pump into the housing
• Connect the fuel pump wiring harness
• Clip the upper housing onto the fuel pump housing
• Put the bushing onto the fuel pup
• Clip the lower housing onto the fuel pump housing

step : Installing the Fuel Sending Unit (8:29)

• Put the fuel sending unit into the tank
• Rotate the sending unit into position
• Put on the fuel sending unit cap
• Insert the six 8mm bolts into the sending unit cap
• Connect the fuel line
• Put on the sending unit bracket
• Insert the two 8mm bolts into the bracket
• Connect the sending unit wiring harness

step : Reinstalling the Rear Seat (9:20)

• Push the service cover into place
• Tap down the service cover
• Pull the seat belts through the seat cushion
• Snap the seat cushion into place