Specifications:

  • Brand New Door Latch Assembly
  • Fits LH (Driver Side) Front Door
  • Direct replacement
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:42)
    • Remove the two Phillips head screws from the door pull
    • Pry off the door handle bezel with a trim tool
    • Pry off the mirror base panel with a trim tool
    • Pry off the power window switch panel with a trim tool
    • Disconnect the tweeter electrical connector
    • Disconnect the window switch electrical connectors
    • Pry out the door light with a trim tool
    • Disconnect the door light electrical connector
    • Pry out the bottom of the door panel with a trim tool
    • Pry out the clip at the top front corner of the door panel
    • Lift the door panel up and off the door
  2. step : Removing the Interior Accessory Panel (3:16)
    • Carefully peel off the inner water shield
    • Roll the window all the way down
    • Remove the ten 7mm screws around the panel
    • Remove the one 10mm screw near the speaker
    • Pull the panel forward
    • Pry off the latch and remove the handle rod
    • Pop the handle rod out of its retainer
    • Pry off the latch and remove the lock rod
    • Pop the lock rod out of its retainer
    • Pull the lock rod out of the actuator
    • Pop out the tab for the courtesy light
    • Disconnect the door lock actuator connector
    • Pop the retainer through the door
    • Pop out the rest of the retaining clips
    • Disconnect the window motor
    • Disconnect the door speaker
    • Pull the harness through the door
    • Slide the accessory panel forward until the window roller is out of the channel
    • Slide the guide out the back and remove the panel
  3. step : Removing the Exterior Door Handle (6:16)
    • Lift the window all the way up
    • Secure the window in place with painter's tape
    • Remove the 10mm bolt on the door jamb side of the handle
    • Remove the 10mm bolt on the backside of the door handle
    • Remove the clip from both of the latch rods on the door handle and door lock
    • Pop the rods out of the handle
    • Pry the handle out of the door
  4. step : Removing the Door Latch Assembly (7:50)
    • Remove the three T30 Torx bolts securing the latch mechanism into the door
    • Remove the 7mm screws from the vent
    • Slide the latch mechanism down and out
  5. step : Installing the Door Latch Assembly (8:44)
    • Reinstall the door latch mechanism into the door
    • Tighten the three T30 Torx screws to the assembly
    • Reinstall the door vent
    • Tighten the three 7mm screws to the vent
  6. step : Reinstalling the Exterior Door Handle (9:15)
    • Connect the door handle rod to the handle
    • Reinstall the handle into the vehicle
    • Line up and reinstall the two 10mm bolts to the handle
    • Pop the lock rod into its clip
    • Remove the tape holding up the window
    • Carefully lower the window to the bottom stop
  7. step : Reinstalling the Accessory Panel (9:55)
    • Reinstall the door speaker connector
    • Connect the window motor connector
    • Slide the panel and regulator into the window track
    • Slide the panel forward
    • Install the front part of the regulator's wheel into its slot
    • Reconnect the door lock rod to the interior handle
    • Reconnect the door handle rod to the interior handle
    • Engage the lock actuator
    • Snap both rods into their guides
    • Lift the accessory panel into place
    • Clip the wiring harnesses into place
    • Run the harness through and reconnect the door actuator
    • Tighten the ten 7mm screws to the panel
    • Tighten the one 10mm screw
    • Carefully press on the water shield
  8. step : Installing the Door Panel (12:38)
    • Lift the door panel into place
    • Pull the wiring harnesses through the window switch opening
    • Push in the door panel clips
    • Clip on the door handle bezel
    • Connect the door light electrical connector
    • Clip on the mirror base trim panel
    • Insert the two Phillips screws into the door pull
    • Connect the electrical connector to the tweeter
    • Connect the two electrical connectors to the window switch
    • Push the switch panel into the door

Tools needed for replacement:

    General Tools

  • Pick

  • Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

  • Torx Drivers & Sockets

  • T30 Torx Driver

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
0
0
0
0
Tc
Installation easy after watching your vidio.works good.price very good.Thanks
February 16, 2017
Purchased
1 year ago
Well satisfied and all went very well fixing it. Very pleasant talking to those at the company.
March 6, 2018
Purchased
2 months ago
Responsive and quality service
Tinely order delivery, correct fit part..............,,,.....,...........,...,,
February 4, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1988-1992 Chevy Astro Front Door Latch Assembly Driver Side
  • 1988-1994 Chevy Blazer S10 Front Door Latch Assembly Driver Side
  • 1989-1999 Chevy C1500 Truck Front Door Latch Assembly Driver Side
  • 1989-2000 Chevy C2500 Truck Front Door Latch Assembly Driver Side
  • 1989-2002 Chevy C3500 Truck Front Door Latch Assembly Driver Side
  • 1989-1999 Chevy K1500 Truck Front Door Latch Assembly Driver Side
  • 1989-2000 Chevy K2500 Truck Front Door Latch Assembly Driver Side
  • 1989-2000 Chevy K3500 Truck Front Door Latch Assembly Driver Side
  • 1988-1993 Chevy S10 Pickup Front Door Latch Assembly Driver Side
  • 1992-1999 Chevy Suburban C1500 Front Door Latch Assembly Driver Side
  • 1992-1999 Chevy Suburban C2500 Front Door Latch Assembly Driver Side
  • 1992-1999 Chevy Suburban K1500 Front Door Latch Assembly Driver Side
  • 1992-1999 Chevy Suburban K2500 Front Door Latch Assembly Driver Side
  • 1995-1999 Chevy Tahoe Front Door Latch Assembly Driver Side
  • 2000 Chevy Tahoe Z71 Front Door Latch Assembly Driver Side
  • 1989-1999 GMC C1500 Truck Front Door Latch Assembly Driver Side
  • 1989-2000 GMC C2500 Truck Front Door Latch Assembly Driver Side
  • 1989-2001 GMC C3500 Truck Front Door Latch Assembly Driver Side
  • 1988-1994 GMC Jimmy S-15 Front Door Latch Assembly Driver Side
  • 1989-1999 GMC K1500 Truck Front Door Latch Assembly Driver Side
  • 1989-2000 GMC K2500 Truck Front Door Latch Assembly Driver Side
  • 1989-2000 GMC K3500 Truck Front Door Latch Assembly Driver Side
  • 1988-1990 GMC S-15 Pickup Front Door Latch Assembly Driver Side
  • 1991-1993 GMC S-15 Sonoma Front Door Latch Assembly Driver Side
  • 1988-1992 GMC Safari Front Door Latch Assembly Driver Side
  • 1992-1999 GMC Suburban C1500 Front Door Latch Assembly Driver Side
  • 1992-1999 GMC Suburban C2500 Front Door Latch Assembly Driver Side
  • 1992-1999 GMC Suburban K1500 Front Door Latch Assembly Driver Side
  • 1992-1999 GMC Suburban K2500 Front Door Latch Assembly Driver Side
  • 1995-1999 GMC Yukon Front Door Latch Assembly Driver Side
  • 2000 GMC Yukon Denali Front Door Latch Assembly Driver Side
  • 1991-1994 Olds Bravada Front Door Latch Assembly Driver Side

This part replaces:

  • OE # 16631627
  • Dorman 940-102
Part #: 1ADLA00144

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(13:56 min)