WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Light Circuit Board 2002-06 Dodge Ram 1500
How to Replace Tail Light Circuit Board 2002-2008 Dodge Ram 1500
Created on:
Tools used
Flat Blade Screwdriver
Phillips Head Screwdriver
T25 Torx Driver
1. Removing the Taillight Connector Plate
Remove the two T25 torx screws from the side of the taillight.
Pull the taillight straight out.
Using a flat blade screwdriver push the locking tab out.
Disconnect the harness.
Remove the four screws from the connector plate.
2. Replacing the Taillight Connector Plate
Switch over the bulbs to the new connector plate.
Push the connector plate into place.
Replace the four screws.
Connect the harness. Replace the locking tab.
Line up the taillight and push it back into place.
Replace the two T25 screws.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Okay, in this video, we're going to show you how replace the taillight connector plate in this 2004 Dodge Ram, same as any '02 to '06. Some symptoms of this is if your taillight doesn't work, and you're tried changing the bulbs. Many times, what happens is these connector plates either get water in them, or the contacts corrode causing your taillight to malfunction. Tools you'll need for this repair, T-25 torx driver, a flat blade screw driver and a Phillips head screw driver.
Okay, first, you're going to remove the taillight, T-25 Torx bit. There's two screws, one here and one down here. See, when I pull one out, the light starts moving. Okay, and then, you pull over here with this hand on the edge. Okay, there's basically two pins here that lock into holes there. Get the flathead screwdriver. There's a locking tab here. Just push it down and out. Then, push on a tab here and remove that harness. Okay, if your bulbs are okay, sometimes, what goes bad is this connector plate. It can get water in it to short out. Four screws.
Okay, and we'll just speed up as I remove those four screws with the Phillips screw driver. Okay, new connector plate from 1A Auto. You can see it's all the same. Okay, just change over our bulbs. You've got to check to make sure the bulbs are good. As you can see the filaments, not a bad idea to get new ones. Okay, connect your taillight.
Okay, and we'll speed it up again here as I just put in those four Phillips screws and tighten them up with the screw driver. Okay, reconnect your harness and your locking tab. Push the light in. You're all set. Okay, and we'll fast-forward through removing those four screws.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet Please feel free to call us toll-free at 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Gloves
T15 Torx Driver
Phillips Head Screwdriver
Safety Glasses
CS172-SASY
In Stock
Product Reviews
Loading reviews
4.71/ 5.07
7 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
2
0
0
0
Circuit board
David
August 5, 2017
Easy to install. Fit perfectly. No problems.will continue to by parts from 1A Auto.
Great!
W
October 6, 2017
A great place! I give them the wrong mailing address. I called them and the guy I talked to straighter it out and I got my order in a few days. I'll use them again!
Dodge Light Circuit Board
R
December 6, 2017
Excellent price for a new part and great delivery time.
Didn't resolve all my lighting problems but helped eliminate some.
Dodge tailight socket bar.
Lewis
January 2, 2019
2004 Dodge SRT 10, this worked perfectly, I had a bad socket and it was causing a "check lights" warning on my dash. When I checked the the tailight the bottom socket fell apart. I did a search and 1A had this in stock. When it came in I replaced the defective socket bar and it worked just as it was supposed to.
1ALTL00733-Dodge Ram 1500 2500 3500 Driver or Passenger Side Tail Light Circuit Board
Douglas
September 7, 2020
Just what I needed. Got it in a timely matter.
Tail light circuit board
RONALD
November 1, 2020
It was very easy to find, purchase, check out and receive. I will be using A1 again in the future!
Part worked as expected, I'm very please and saved money from local dealership cost...
Kenneth
April 1, 2023
Very good
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.