Replaces

Dodge Ram 1500 Truck Wheel Bearing & Hub Assembly TRQ BHA53944 - 1ASHF00075

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • 3 Bolt Flange
  • Fits 5 Lug Wheel
  • Studs already installed
  • Direct replacement
  • Does NOT fit the LH (Driver Side) on models that use a Speed Sensor
  • Fits models with RWAL (Rear Wheel Anti-Lock Brakes) only
    • Does NOT fit models with 4 Wheel ABS
NOTE: 2004-07 Ram 1500 V8 5.7L Models: The speed sensor is only on the LH (Driver Side) wheel bearing. Please verify there is no speed sensor on the LH (Driver Side) bearing before ordering.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53944 Axle / Spindle Nut Torque Specification

  1. step : Remove the wheel and tire (1:13)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (1:40)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
    • Use your socket to remove the brackets.
  3. step : Remove brake disk (3:00)
    • Take care not to touch the rotor, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (3:16)
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Use a pry bar to remove the axle.
    • Remove the 3 bolts securing the hub using your 18mm socket and extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Disconnect your ABS sensor.
    • Use a rubber mallet to break your hub free, and work around the flange with the hammer to pull it off.
    • Remove the hub and shield.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (9:26)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Put the three 18 mm bolts in place and tighten the nuts to 100 ft lbs.
    • Reinstall the ABS harness.
    • Replace the axle.
    • Tighten but don't torque the lug nut.
  6. step : Put brakes and wheel back on (11:40)
    • Remember to replace the lug nuts on in a star pattern.
    • Lug nuts tighten to 120 ft lbs
    • Hub nut is 185 ft lbs.
    • Make sure to check your brakes and steering before driving again.
    • Make sure to pump the brakes and seat your rotors.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket

  • Sockets - SAE

  • 13/16 Inch Socket
  • 7/8 Inch Socket

4.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
0
great product
Arrived quickly and was installed without a problem in 30 minutes. perfect fit.
April 24, 2018
Purchased
3 months ago
Hub assembly purchase
I recently bought a hub assembly from 1A Auto for my 2007 dodge ram. They are very quick and efficient with their service. I had no issues and I received my product very quickly. I want to say Thank You to 1A Auto for the educational video's on auto repair. Just being able to watch and learn from those saved me a ton of money. I would definitely recommend them to friends and family
March 26, 2018
Purchased
4 months ago
Seems to work, good price.
Everything fit perfectly, the price was good, and the instructional video helped a lot. Its too bad they don't ship directly to Canada for the same price - I had it sent to the border and drove down to pick it up.
August 23, 2017
Purchased
12 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 4 answers
How fast can one get the hub assembly?
Michael U on Aug 2, 2017
BEST ANSWER: With our free ground shipping it would take between 3 - 5 business days. If you do need expedited shipping we offer it to most customers within the 48 contiguous states and prices are available by entering your zip code/postal code.
Does this part fit a 4 x4 truck?
Mike T on Feb 20, 2016
BEST ANSWER: Yes, this will fot a 4x4 model. Please read the details:
Does NOT fit the LH (Driver Side) on models that use a Speed Sensor
Fits models with RWAL (Rear Wheel Anti-Lock Brakes) only
Does NOT fit models with 4 Wheel ABS

NOTE: 2004-07 Ram 1500 V8 5.7L Models: The speed sensor is only on the LH (Driver Side) wheel bearing. Please verify there is no speed sensor on the LH (Driver Side) bearing before ordering.

Vehicle Fit

  • 2002-2005 Dodge Ram 1500 Truck Front Wheel Bearing & Hub Assembly for Models with Rear Wheel ABS Brakes TRQ
  • 2006-2008 Dodge Ram 1500 Truck Quad Cab Front Wheel Bearing & Hub Assembly for Models with Rear Wheel ABS Brakes TRQ
  • 2006-2008 Dodge Ram 1500 Truck Regular Cab Front Wheel Bearing & Hub Assembly for Models with Rear Wheel ABS Brakes TRQ

This part replaces:

  • OE # 52070321AB
  • OE # 52070321AA
  • Hollander 538-01580
  • TRQ BHA53944
Part #: 1ASHF00075

TRQ
Brand #: BHA53944

How-to Video:

(13:39 min)