1ASHS00031-Dodge Ram 1500 Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set


Dodge Ram 1500 Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ


Part Details

  • Bearing Type: Tapered Roller Bearing
  • Set Quantity: 2 Piece

This part replaces:

  • TRQ BHA53323
Save 22%
List: $153.95 Save: $34.00
Part 1ASHS00031
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: BHA53323

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Set Quantity:   2 Piece
  • Bearing Type:   Tapered Roller Bearing

What are Tapered Bearings and Why Use Them?

Tapered bearings are better than roller ball bearings at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars. 

Roller ball bearings have spherical ball bearings between two straight rings (called races). Tapered bearings use tapered rollers shaped like flat-topped cones and two races angled from the outside to the inside of the bearing. The greater the angle, the more axial load the bearing can handle.

Your model came from the factory with tapered bearings. This type of bearing handles cornering forces better for trucks and large cars. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing will result in increased wear and faster failure.


Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.
100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

BHA53893 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (1:18)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the 19mm lug nuts
    • Pull off the wheel
  2. step : Removing the Brakes (1:34)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove 10mm allen head bolts from the brake caliper
    • Pull the caliper aside
    • Pull the rotor off
  3. step : Removing the Wheel Hub Assembly (3:17)
    • Remove the axle nut cotter pin
    • Remove the 1-3/4 in axle nut
    • Push in the axle
    • Remove the tie rod end cotter pin
    • Remove the tie rod end 21 mm castle nut
    • Hammer on the side of the knuckle to break the tie rod end loose
    • Support the tie rod
    • Remove the 12 point 9/16 hub assembly bolts
    • Rethread the bolts and hammer them to push the wheel hub assembly out
    • Remove the bolts hub assembly
    • Pry out the hub assembly as necessary
  4. step : Installing the Wheel Hub Assembly (11:35)
    • Clean the hub mounting surface of the wheel knuckle
    • Apply anti-seize grease to the mounting surface and axle splines
    • Clean the mounting surface of the backing plate as necessary
    • Slide the hub assembly bolts into the knuckle
    • Set the backing plate on the hub assembly bolts
    • Set the hub assembly into the knuckle aligned with the bolts
    • Install the hub assembly bolts
    • Torque the 12 point 9/16 hub assembly bolts to 125 ft-lb
    • Insert the tie rod end into the knuckle
    • Install the 21 mm tie rod castle nut
    • Torque the 21 mm tie rod castle nut to 65 ft-lb, then continue tightening the nut to align the cotter pin hole if necessary
    • Install the tie rod end cotter pin and peen it over
    • Insert a pry bar through the U joint
    • Install the axle washer and nut
    • Torque the 1-3/4 axle nut to 175 ft-lbs and continue tightening to align the cotter pin hole if necessary
    • Install the cotter pin and peen it over
    • Apply anti-seize to the wheel hub surface
  5. step : Installing the Brakes (18:02)
    • Install the brake rotor onto the wheel studs
    • Secure the rotor temporarily with a lug nut
    • Set the brake caliper in position
    • Install the 10 mm allen slider bolts
    • Torque the slider bolts to 38 ft-lb
    • Remove the lug nut
  6. step : Installing the Wheel (19:48)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle partially to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Hammer
  • Wire Brush

  • Hex Wrenches

  • 10mm Hex Socket

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Anti-Seize Grease
  • Brake Grease

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket

  • Sockets - SAE

  • 1-3/4 in Socket
  • 9/16 in 12-Point Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will this fit my 96 dodge 1500 truck with the 5.9?
Robby K January 5, 2016
hello, Yes these are listed for your truck w/4WD.
Brian F January 6, 2016
Yes it should, if its a 4x4 exact fit for my 98 4x4, takes a few hrs
Jan R January 6, 2016
Yap. My 95 1500 4x4 has the 5.9 and they fit.
Marshall M January 6, 2016
I have a 98 dodge 1500 5.9 and it fit fine.
Ray A January 6, 2016
Yes that will work on your truck. If you havent replaced them in the past PB Blaster and a big breaker bar will be your friend. Good luck
Jack J January 7, 2016
Yes, it should fit. You will need a large hammer, and maybe some heat to get the old ones off. The brake dust shields will turn into rusty scrap metal. Wedges hammered into strategic points will also help if you dont have a torch.
William J January 8, 2016
Yes. They fit perfect on my 99 5.2 dodge.
Taylor W April 2, 2020
Do these come with new bolts? And if not can I request new bolts at additional cost?
Jules Z September 5, 2020
Thank you for your inquiry. New hardware is not included with this item. You may be able to reuse your original hardware if it is in good condition. We do not have the mounting bolts available however a local part store should have these readily available. Please let us know if you have any other questions.
Ian P September 6, 2020

Fits the following Makes:

Year Make Model Description
1994-1997Dodge Ram 1500 Truck Dodge Ram 1500 Truck 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set
1998-1999Dodge Ram 1500 Truck Dodge Ram 1500 Truck 4 Wheel Drive with Rear Wheel ABS Brakes Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set

Part Interchange

Brand Label Part Number
Chicago Rawhide BR930256
Chrysler 52008220
Drive Tech America NT515006
GMB 725-0011
Green Ball WH596
MOOG Hub Assemblies 515006
Mevotech H515006
Mopar V2508220AA
Raybestos 715006
Raybestos Brakes 715006
SKF BR930256
SKF BTD-5108
Timken 515006

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: BHA53323
Product Reviews
4.89/ 5.0
9 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Hub asm
Good product, easy to change with some mechanical knowledge
January 6, 2016
Works just fine
No problems with shipping, delivery was on time and parts fit perfectly.
September 12, 2017
great product
Arrived quickly, exact fit, and seemed good quality. Also my local store wanted $150 each so way better price.
January 20, 2018
Great product
Sturdy build, easy installation. Shipping was quick. Product was priced very well for a pair. I would definitely recommend this to anyone. Will probably be buying more parts from here
February 2, 2018
The service I got from 1 a auto has been outstanding with the service and prices because the auto parts stores never have anything in stock and the prices is very high
August 24, 2018
All positive
I have made a few purchases and each one was exactly what I ordered and were delivered on time.
January 6, 2019
Wheel bearings and Hub assembly.
Parts came in like said and fitment was perfect. Id recommend 1a Auto. Representative explain parts and let you know warranty and asked if there was anything else they could help with.
June 14, 2019
So far so good.
Been on the truck for about 6 months now. No issues. Nice quality. Also bought tie rods, ball joints and universal joints and all are wonderful. Free and fast shipping!
April 1, 2020
Installed these on my 1998 Dodge Ram 1500. Couldn’t ask for a better part. Will be ordering from this site again!
June 17, 2020
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Dodge Ram 1500 Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ-1ASHS00031 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.