Replaces
Replaces Dodge Ram Front Tie Rod and Drag Link Assembly Mopar 52122362AF
$658.95
Replaces 2006-08 Dodge Ram 1500 Front 8 Piece Drivetrain Kit TRQ PSA27256
$652.95
Replaces 2006-08 Dodge Ram 1500 Front 8 Piece Drivetrain Kit TRQ PSA27254
$646.95
Replaces Dodge Ram 1500 2500 3500 Front Tie Rod and Drag Link Assembly MOOG DS800980A
$624.95
Replaces Dodge Ram 1500 2500 3500 Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set Timken TKSHS00062
$584.95
Replaces 2006-08 Dodge Ram 1500 Front 6 Piece Drivetrain Kit TRQ PSA27257
$571.95
Replaces Dodge Ram 1500 2500 3500 Rear Door Wiring Harness 2 Piece Set Mopar MPZMA00008
$554.95
Replaces 2006-08 Dodge Ram 1500 Front 6 Piece Drivetrain Kit TRQ PSA27255
$544.95
Replaces Dodge Ram 1500 2500 3500 Front Ceramic Performance Brake Pad & Rotor Kit DIY Solutions BFS05412
$484.95
Replaces Dodge Ram Chrysler Throttle Body Assembly Mopar 53032801AC
$482.95
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Okay, friends. To get started on replacing our fog lights, it's gonna be easiest from under the front bumper. As you can see right along here, you can see the assembly, and, of course, you can see the wiring. We need to disconnect the wiring. I'm just gonna use a pocket screwdriver. Just kind of pull on these two tabs a little bit and then I should be able to pull this down. Take a look, make sure you don't see any funny colors, set that aside. Next, we're gonna remove our three 10-millimeter headed mounting bolts. Grab your fog light and remove it.
All right, friends. Now, it's time to install our brand new fog lamp assembly. Something that I wanna show you while it's out, is this area right here, is your adjuster. Let's go ahead and get this up inside here. Start in all three of your bolts and then we'll snug them up. Just gonna use a tiny bit of dielectric grease on this and we'll connect it in. Make sure it's clipped, give it a nice tug. Perfect. To adjust your foglight, just use a Phillips head, comes right through this slot right there. So, once your headlamps are properly adjusted, it'll be time to adjust your fog lamps. You'll notice on the driver side, the focal point is all the way at the bottom right now. I would like to bring it up so it meets up with approximately the bottom of the focal point of the headlight. Some fog lamps have an adjuster, others don't, the ones that do have an adjuster, you would just turn the adjustment to the left or to the right to adjust the beam up and down to where it needs to be. Now with your TRQ headlamps and fog lamps properly aligned, you can drive down the road safely.
