/2008 Dodge Ram 3500 Truck Driver & Passenger Side A-Pillar Trim with Pull Handle 2 Piece Set Mopar MPIMK00095
MPIMK00095-Dodge Ram 1500 2500 3500 Driver & Passenger Side A-Pillar Trim with Pull Handle 2 Piece Set Mopar MPIMK00095
MPIMK00095Mopartrue
Replaces
2008 Dodge Ram 3500 Truck Driver & Passenger Side A-Pillar Trim with Pull Handle 2 Piece Set Mopar MPIMK00095
Guaranteed to fit 2008 Dodge Ram 3500 Truck
Out of Stock
$212.95
Notify When Available
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Part Details
Quantity: 2 Piece Set
Kit Includes: (1) Driver Side A-Pillar with Pull Handle (1) Passenger Side A-Pillar with Pull Handle
Specification
Side Location
Driver & Passenger Side
Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
Item Condition:New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How to Replace A-Pillar Trim with Pull Handle 2002-2008 Dodge Ram 1500
How to Replace A Pillar 2006-08 Dodge Ram 1500
Created on:
Tools used
Gloves
Socket Extensions
Socket Driver
10mm Socket
Ratchet
Safety Glasses
Pocket Screwdriver
Tools used
Socket Extensions
10mm Socket
Ratchet
Pick
1. Removing the A Pillar
Pry out the trim buttons with a pick
Remove the two 10mm bolts in the pillar
Pop the A Pillar down and out
Pull the A Pillar up and out of the dash
2. Installing the A Pillar
Press the A Pillar into the dash
Snap the A Pillar into place
Tighten the 10mm bolts to the A Pillar
Press on the trim buttons
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the A pillar in this Dodge Ram. This is a 2008, but the procedure is the same for 2006 to 2008. You'll need a new A pillar from 1AAuto.com, a 90 degree pick, and a 10mm socket, ratchet with an extension.
To remove the A pillar, use a small hook pick to release the covers for the bolts. Using a 10mm socket and ratchet, remove the two bolts. Pop the A pillar out and release it from the dash.
See, we have the same tabs to lock in behind the dashboard. Same holes for the 10mm bolts as well as new covers included with the new A pillar. We have some sound deadening material inside as well as new clips for the upper portion of the A pillar and an alignment pin.
You can see our old part has some burns, and cuts, and scratches if you look at it against our new part from 1A. See, nice bright color where this is kind faded and dirty, damaged. We're going to go ahead and replace it. This new part from 1A Auto is going to go in direct fit just like the original piece.
We're going to install the bottom of the A pillar into the dash. Line up the top of the pillar. Make sure that your door is seal, weatherstrip is over the A pillar before snapping the clips into place.
We're going to install your two 10mm bolts. You may have to tilt your stirring column down to make it easier to line the bolts up. Pop the covers back into place.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Dodge is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Dodge or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.