Replaces

Dodge Nitro Jeep Liberty Shock & Strut Kit - 1ASSP00754

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Pre-Assembled

Pre-assembled, loaded strut & spring assemblies allow for a quicker, safer install than replacing with just bare struts. 

Trouble-Free Install

Trouble-free install includes the matched parts needed to get the job done. New mounts, bearings, springs and hardware will provide a better ride for your vehicle and save you time from not having to do the job again because a used part failed afterwards.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:40)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Rear Shock (0:59)
    • Secure the vehicle on jack stands
    • Hold the 15mm bolt with a 15mm wrench from the bottom of the shock
    • Remove the 18mm bolt from the bottom of the shock
    • Jack up underneath the wheel knuckle to push in the shock
    • Remove the 15mm bolt
  3. step : Installing the New Shock (1:52)
    • Place the 15mm bolt on the top of the shock and tighten it
    • Align the lower part of the shock
    • Insert and tighten the 15mm bolt and 18mm nut
    • Torque the bolts to 75 foot-pounds
  4. step : Reattaching the Wheel (2:44)
    • Slide the wheel into place
    • Start the 19mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 15mm Wrench

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
0
0
0
0
Great place to shop for auto parts
1A Auto has a 5 STAR rating with me. They have saved me time and money. they have high quality products and a fast shipping procedure. I will continue to buy from 1A Auto and refer to others.
August 4, 2017
Purchased
8 months ago
Strut & Shocks
I ordered my 2004 Jeep Liberty kit and received in no time. All parts in kit were in perfect order but there was NO video for the strut installation. I found one on U TUBE that was adequate and would love to see one from 1A Auto. My learning curve for the struts was dismal but the second one was easier to do and was completed in about 3 hours using bottle jack for all my lifting. There were no specs on the video I saw so I torqued all my bolts to what I guessed was sufficient. Not to my liking but...
The ride has significantly improved and would recommend this kit for the do-it-yourselves.
August 9, 2017
Purchased
8 months ago
Good job
Everything fit good was expressed with time of delivery
July 1, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 12 answers
Does this kit come with new struts with new coil springs already put together and new shocks?
Jason D on Sep 12, 2016
BEST ANSWER: Yes. This kit comes with preassembled struts and mounts. There is no dangerous work required other than bolting them into the car. Shocks are included as well.
Tthis is hands down the best kit I've found and they ride great!
Does this kit come with the boots?
Christy J on Apr 23, 2017
BEST ANSWER: What you see is what you get! No new boots. I will say this, my Libeity rode like new after the install and a alinement.

Vehicle Fit

  • 2007-2011 Dodge Nitro Front & Rear Shock & Strut Kit 4 Piece Set
  • 2002-2004 Jeep Liberty Front & Rear Shock & Strut Kit 4 Piece Set
  • 2005-2006 Jeep Liberty Front & Rear Shock & Strut Kit 4 Piece Set (excluding Diesel Engines)
  • 2007-2012 Jeep Liberty Front & Rear Shock & Strut Kit 4 Piece Set

This part replaces:

  • OE # 52088673AE
  • OE # 52109912AD
  • OE # 52109912AE
  • OE # 52109912AG
  • OE # 52125307AB
  • OE # 68052690AB
  • OE # 68003954AB
  • OE # 68003952AC
  • OE # 68046314AD
  • OE # 68031298AC
  • OE # 52088650AC
  • OE # 52088650AF
  • Monroe 171577L
  • Monroe 171577R
  • Monroe 37203
  • KYB 344404
Part #: 1ASSP00754



How-to Video:

(03:34 min)