1AECS00003-Dodge Jeep Crankshaft Position Sensor
false

Replaces

5

2002 Dodge Ram 1500 Van V6 3.9L (8th Vin Digit X) Automatic Transmission Crankshaft Position Sensor

Guaranteed to fit 2002 Dodge Ram 1500 Van

97-03 Jeep Dodge Crankshaft Sensor
$ 36.95
$48.95
25% OFF
$48.95
25% OFF
FREE SAME DAY SHIPPING
DIY Solutions
ESS00072
In Stock
Part 1AECS00003

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Specify your vehicle

Specify your vehicle's year, make and model to guarantee fit.

If your vehicle isn't listed, search Crankshaft Position Sensor


Orders must be placed by 2pm ET
Part 1AECS00003
In Stock

Enter your zip code


Frequently bought together

Specify your vehicle

Specify your vehicle's year, make and model to guarantee fit.

If your vehicle isn't listed, search Crankshaft Position Sensor

DIY Solutions
ESS00072
In Stock
Part 1AECS00003
Product Reviews
Loading reviews
4.80/ 5.0 5
Fit perfectly
L
September 20, 2017
Replacing the Crank Position Sensor was easier than I thought. 1A sent me the exact fit part, looks just like the OEM part it replaced. Will order form 1A again.
Sensor worked
Shawna
January 18, 2020
Worked just fine, but wish it came with bolts as i was missing one and finding a replacement is becoming a project!
good price good product
michael
February 17, 2020
ordered part came in after a shtipping problem was straightend out put in part no problem works great
crankshaft position sensor
M
November 12, 2020
Once received, quite fast, I installed it and vehicle started right up. Told by dealership there is a back log for that part for my ram 1500. 1A auto the best.
1AECS00003-Dodge crankshaft position sensor
Michael F
November 3, 2021
Great quality product and worked well exact fit
Customer Q&A
Is there a factory spec for the crank positioning sensor Gap?
August 15, 2017
John D
10
We do not have any factory specification, but you may search through a service manual to obtain this. If you view an online automotive forum you may get more details as well by other owners of the same vehicle.
August 15, 2017
Alex P
10
As far as i know no.it should just bolt into place.if your still having a sensor alert try your ignitiin relay sensor.or cam position sensor its located under the distributor car and rotor
August 17, 2017
S C
Where is the crankshaft sensor located in my 2001 Dodge Durango ?
March 11, 2019
Sixto A
10
.they have 2 possible locations for them.Its either under distrubutor cap or its under the block on passanger side front of block.you have to remove the wheel house cover if its there.
March 11, 2019
S C
10
The Crankshaft Position sensor is located at the right-rear side of the engine cylinder block. It is positioned and bolted into a machined hole in the engine block
March 11, 2019
Jessica D
10
If it's a V-6 engine, it should be at the rear of the engine block on passenger side. Remove passenger side front wheel and plastic fender liner and you'll see it. You can trace the wires right to the sensor.
March 11, 2019
L A
Does it come with a bushing?
July 26, 2019
Arnold E
10
No
July 26, 2019
V E
10
No sorry
July 26, 2019
V E
10
Sorry, It did not come with any kind of a bushing. It came exactly as the picture shows.
July 26, 2019
D S
10
It comes exactly as you see it. When I replaced mine I could feel the bushing you might be talking about already attached around the cavity this inserts in to. It was rubber and it gave me some difficulty trying to slide the sensor past during install.
July 26, 2019
Tyler P
10
No one on my Dodge Durango stays in the bellhousing. You just pull the old sensor out and put the new one back in
July 26, 2019
Junior M
10
No, this part does not include a bushing. It will arrive exactly as shown and described in the listing.
July 26, 2019
Christa R
What can make the crankshaft position sensor hit the flex plate?On a 99 Dodge Dakota
October 5, 2020
Dannie N
10
Hi..I had a 99 dakota..it should be a dead-bang fit..I would line up the old one with the new obe and make sure its exactly the same size
October 6, 2020
Bruce the Brush B
10
Thanks for your inquiry. If you are encountering a fitment issue with the crankshaft potiions sensor it may be due to the incorrect part being installed in the vehicle. However, here could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause.
October 6, 2020
Jessica D
10
If you replaced it with a new sensor it might have got bent when installing it if the old one didn't hit. You could check the old on for wear if it is it's possible that the flex wheel is bent worst case. Hopefully this helps.
October 17, 2020
M M
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Dodge is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Dodge or FCA US LLC. See all trademarks.

Dodge Jeep Crankshaft Position Sensor DIY Solutions-1AECS00003 does not fit your:



Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2002 Dodge Ram 1500 Van with these options.