1AEEM00026-Dodge Jeep American Motors Exhaust Manifold


Dodge Jeep American Motors Exhaust Manifold DIY Solutions


Part Details

  • Material: Cast Iron

This part replaces:

  • Hollander 327-1314, 327-01209T
  • Dorman 674-225
  • DIY Solutions EXH00255
Save 22%
List: $127.95 Save: $28.00
Part 1AEEM00026
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: EXH00255

Frequently bought together

Vehicle Fit
Warranty & Shipping

Part Details

  • Material:   Cast Iron

Our aftermarket manifolds are some of the highest quality replacements on the market!

If your vehicle's exhaust is getting loud and the exhaust noise is coming from under the hood or engine then you may need to fix a cracked exhaust manifold. Replacing a broken manifold is easiest with a direct replacement manifold that will fit correctly and bolt up to you original engine and exhaust system. This manifold is a direct fitting replacement.

This cast iron manifold has been designed to eliminate the faults of the original Jeep design.


  • Includes heat shield
  • 2 bolt flange
  • Includes Gaskets and Hardware
  • Direct replacement
  • Replaces original manifolds that are cracked from thermal expansion and contraction
  • Corrosion resistant
  • Strengthened and redesigned in the vulnerable areas of failure

Now you can buy a high quality exhaust manifold that is built to strict quality control standards for about almost 1/3 the price of the dealer. REPLACE your broken, warped, or cracked one now with this great fitting, alternative.

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Fits the following Makes:

Year Make Model Description
1983-1984American Motors Eagle American Motors Eagle L4 2.5L Exhaust Manifold
1996-2002Dodge Dakota Dodge Dakota L4 2.5L Exhaust Manifold
1983-1986Jeep CJ7 Jeep CJ7 L4 2.5L Exhaust Manifold
1983-1985Jeep CJ8 Scrambler Jeep CJ8 Scrambler L4 2.5L Exhaust Manifold
1984-2000Jeep Cherokee Jeep Cherokee L4 2.5L Exhaust Manifold
1986-1992Jeep Comanche (MJ) Jeep Comanche (MJ) L4 2.5L Exhaust Manifold
1984-1987Jeep Wagoneer Jeep Wagoneer L4 2.5L Exhaust Manifold
1987-1995Jeep Wrangler Jeep Wrangler L4 2.5L Exhaust Manifold
1997-2002Jeep Wrangler Jeep Wrangler L4 2.5L Exhaust Manifold

Part Interchange

Brand Label Part Number
DIY Solutions EXH00255

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

DIY Solutions
Brand #: EXH00255
Product Reviews
3.73/ 5.0
11 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great fit at a very affordable price and delivery time was wonderful as well.
July 17, 2017
So far, so good!!!
My Wrangler has leaked exhaust since I bought it a year ago. Tried several liquid metal products to fill the cracks and the last one was fairly successful, but there was still a leak. Bought this based on the reviews and warranty, and my Jeep sounds/smells awesome!! I took the power steering pump off the intake, removed the airbox and tube, removed the throttle cable, then left all the electrical connections in place. Took out the bolts and slid the exhaust out from between the intake and head. Took about an hour and a half. Well made product and works great so far. Dan
August 10, 2017
looks good I put it on now well see how it lasts......
August 20, 2017
Jeep 2.5 exh.manifold
Great price on this part. Heavier made than the original. However , the flange was thicker than original , thicker than the intake flange, and that required machining to let the bolt and washer properly hold the manifold set together against the head. Both flanges have to be the same thickness. The intake will not tighten without removal of some of the extra thickness from the new exhaust manifold flange.
August 23, 2017
Great price
I purchased the exhaust manifold from 1A for about half what it was at the "parts house". I personally did not install it I had a mechanic do it. He didnt have any complaints adout the install and as far as i can tell it works great no leaks. I would recommend this item to anyone. It was also shipped and delivered in a very timely manner.
March 7, 2018
Much better that original
Much heavier and robust than the factory manifold that was on my TJ. Bolting surfaces are about an 1/8" thicker which causes an issues where exhaust manifold and intake manifold share bolts. Easily remedied by spot facing these areas with a mill or small grinder (dremel, die grinder, etc)
April 4, 2018
Jeep TJ 4 cyl exhaust manifold
The manifold arrived quickly. It was a good fit, however some modification to the heat shield was necessary to install the top center bolt and to clear the motor mount. This was frustrating as it had to be removed twice. Jeep is very quiet now.
July 30, 2018
Manifold is thicker than stock
As the title states, the manifold is thicker than the stock one, on the plate specifically where it bolts to the head. The issue is that the intake is now to thin (bolts on with the manifold). The heat shield was also in the way of one of the bolt holes and had to be modified. Ill figure out a way to make it work. The manifold looks to be good quality, despite the flaws.
November 18, 2018
It works and fits fine without the thermal shield. The thermal shield was too big to fit in with the intake manifold.
August 1, 2019
Nice with modifications
This product is as other reviews have mentioned. It does not fit right without modifications. The top hole needs to be drilled out to line up with the shield. The side bolts holes are too thick and do not sit flush when mounted therefore must be ground down a ways. I had to take off about a half an inch to make it work efficiently. After all is said and done, the jeep is quieter, tho I didnt notice any gains in power at all.
August 18, 2019
Bad machining
Bolt flanges not machined to proper depth. Barely enough bolt head to hold intake on at same time. Manifold cracked again after 1 month. Would not buy this again.
January 9, 2020
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Dodge Jeep American Motors Exhaust Manifold DIY Solutions-1AEEM00026 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.