Specifications:

  • 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Size:
    • Height - 4"
    • Extension Width - 2"
  • High quality ABS Plastic
  • Smooth black paint to match finish
  • UV protected from fading and chalking
  • Direct fit, no drilling or cutting required
  • Includes hardware and instructions

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Fender Flare Kit Installation Instructions
  1. step : Preparing the Rugged Style Fender Flares (0:51)
    • Remove the 3M tape as you press the seal into the flare
    • Cut the seal when you reach the end of the flare
    • Turn the wheel out of the wheel well
    • Insert the fender flare into place and find where the bolts align with the flare
    • Remove the Phillips screws/8mm bolts from the wheel well
    • If you have a rusty wheel arch, skip to step 3
  2. step : Installing the Rugged Style Fender Flare (3:21)
    • Insert the fender flare into place
    • Loosely tighten the bottom screw to the fender flare
    • Align the flare with the body line
    • Tighten the rest of the hardware into the wheel well and flare
    • If necessary, use the self-tapping screws and clips to tighten the flare into place
    • Repeat the process on the other side
  3. step : Removing the Scaling and Bubbling Paint (4:46)
    • This step is only necessary for trucks with rust on the wheel arch
    • Score around the perimeter of the rust/paint bubbles with a razor blade
    • Scrape off any scaling with a flat blade screwdriver
    • Sand down the area
    • Treat the body with rust-preventative coating or paint
    • Follow step 2

Tools needed for replacement:

    General Tools

  • Utility Knife

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Sandpaper

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(08:26 min)

Tools List:

    General Tools

  • Utility Knife

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Sandpaper

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket




Vehicle Fit

  • 2002-2008 Dodge Ram 1500 Truck Rugged Style Black Smooth - Paint to Match Fender Flare Kit 4 Piece Set
  • 2003-2009 Dodge Ram 2500 Truck Rugged Style Black Smooth - Paint to Match Fender Flare Kit 4 Piece Set
  • 2003-2009 Dodge Ram 3500 Truck Rugged Style Black Smooth - Paint to Match Fender Flare Kit 4 Piece Set for Models with Single Rear Wheels (SRW)
Part #: 1ABFK00012

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More