1APBS00236-Dodge Durango Ram 1500 Front & Rear Semi-Metallic Performance Brake Pad & Rotor Kit

Replaces

Dodge Durango Ram 1500 Front & Rear Semi-Metallic Performance Brake Pad & Rotor Kit

1APBS00236

Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Friction Material: Semi-Metallic
  • Kit Includes: (1) Rear Semi-Metallic Brake Pad Set
  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Kit Includes: (2) Rear Performance Brake Rotors
  • Front Brake Rotor Venting Type: Vented
  • Rear Brake Rotor Diameter: 13.86 in. (352mm)
  • Front Brake Rotor Diameter: 13.19 in. (335mm)
  • Rear Brake Rotor Venting Type: Vented
  • Wheel Lug Count: 5 Lug
  • Product Line: Performance
FREE SAME DAY SHIPPING
Save 26%
List: $342.95 Save: $88.00
Part 1APBS00236
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ Performance
Brand #: BKA12219

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Rear Brake Rotor Venting Type:   Vented
  • Brake Pad Friction Material:   Semi-Metallic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Front Brake Rotor Diameter:   13.19 in. (335mm)
  • Front Brake Rotor Venting Type:   Vented
  • Rear Brake Rotor Diameter:   13.86 in. (352mm)
  • Kit Includes:
      (1) Rear Semi-Metallic Brake Pad Set
      (1) Front Semi-Metallic Brake Pad Set
      (2) Front Performance Brake Rotors
      (2) Rear Performance Brake Rotors
  • Product Line:   Performance

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Remove wheel. (1:17)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your 22mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 22mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the calipers (1:50)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 13mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 13/16 inch bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. step : Install new rotor and pads (6:10)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 110 ft lbs.
    • Compress the caliper piston with a c-clamp to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 25 ft lbs.
  4. step : Put wheel back on (10:40)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 120 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brakes (11:00)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large C-Clamp
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket

  • Sockets - SAE

  • 13/16 Inch Socket
  • 7/8 Inch Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2004-2006Dodge Durango Dodge Durango Front & Rear Semi-Metallic Performance Brake Pad & Rotor Kit
2002-2003Dodge Ram 1500 Truck Dodge Ram 1500 Truck Front & Rear Semi-Metallic Performance Brake Pad & Rotor Kit
2004-2005Dodge Ram 1500 Truck Dodge Ram 1500 Truck ST Front & Rear Semi-Metallic Performance Brake Pad & Rotor Kit
2004-2005Dodge Ram 1500 Truck Dodge Ram 1500 Truck Laramie Front & Rear Semi-Metallic Performance Brake Pad & Rotor Kit
2004-2005Dodge Ram 1500 Truck Dodge Ram 1500 Truck SLT Front & Rear Semi-Metallic Performance Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 53005
Aimco 53006
Bendix PRT5381
Bendix PRT5365
DuraGo BR53006
DuraGo BR53005
Raybestos EHT898H
Raybestos EHT966H
Raybestos Brakes EHT898H
Raybestos Brakes EHT966H
Raybestos Brakes 780073
Raybestos Brakes 780082
Wagner BD126002
Wagner BD126062

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ Performance
Brand #: BKA12219
Product Reviews
5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Good deal
All the parts went on the truck and fit correctly, no surprises!
July 1, 2017
Exactly what I needed and then some
The parts were better priced and yet better quality than anything I could find in other stores
February 5, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Dodge Durango Ram 1500 Front & Rear Semi-Metallic Performance Brake Pad & Rotor Kit-1APBS00236 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.