1ATBA00035-Dodge Chrysler Throttle Body Assembly

Replaces

Dodge Chrysler Throttle Body Assembly DIY Solutions ENG00428

1ATBA00035
FREE SAME DAY SHIPPING
Save 27%
List: $170.95 Save: $46.00
Part 1ATBA00035
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: ENG00428

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Includes:   Throttle Position Sensor

Highest Quality Materials

Made from highest quality materials that meet or exceed OEM standards

Direct Fit Replacement - Guaranteed to fit and function for your specific application
Quality Tested - built to a strict level of product standards.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Returns: Parts with electrical components cannot be returned once installed.

  1. step : Removing the Throttle Body (1:01)
    • Open the hood
    • Loosen the intake hose clamp with a flat blade screwdriver
    • Pull the coolant hose out of its bracket
    • Remove the MAP sensor from the air intake
    • Disconnect the throttle body wiring harness
    • Pull the intake hose off the throttle body
    • Remove the two 10mm nuts from the throttle body
    • Remove the two 15mm bolts from the throttle body bracket
    • Remove the bracket from the throttle body
    • Remove the four 10mm bolts from the throttle body
    • Pull the throttle body off the intake manifold
  2. step : Installing the Throttle Body (3:46)
    • Put the throttle body onto the intake manifold using the locating tabs
    • Insert the two studded 10mm bolts onto the firewall side of the throttle body
    • Insert the two regular 10mm bolts onto the grille side of the throttle body
    • Connect the throttle body wiring harness
    • Put the throttle body bracket into place
    • Fasten the two 10mm nuts onto the throttle body
    • Insert the two 15mm bolts into the throttle body bracket
    • Connect the air intake hose to the throttle body
    • Tighten the intake hose clamp with a flat blade screwdriver
    • Push the coolant hose onto its bracket
    • Push the MAP sensor into the intake hose
    • Close the hood

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 15mm Socket


Fits the following Makes:

Year Make Model Description
2005-2010Chrysler 300 Chrysler 300 V6 3.5L Throttle Body Assembly
2005-2010Chrysler 300 Chrysler 300 V6 2.7L Throttle Body Assembly
2007-2008Chrysler Pacifica Chrysler Pacifica V6 4.0L Throttle Body Assembly
2006-2010Chrysler Sebring Chrysler Sebring V6 2.7L Throttle Body Assembly
2007-2010Chrysler Sebring Chrysler Sebring V6 3.5L Throttle Body Assembly
2008-2010Chrysler Town & Country Chrysler Town & Country V6 4.0L Throttle Body Assembly
2008-2010Dodge Avenger Dodge Avenger V6 3.5L Throttle Body Assembly
2008-2010Dodge Avenger Dodge Avenger V6 2.7L Throttle Body Assembly
2009-2010Dodge Challenger Dodge Challenger V6 3.5L Throttle Body Assembly
2006-2010Dodge Charger Dodge Charger V6 2.7L Throttle Body Assembly
2006-2010Dodge Charger Dodge Charger V6 3.5L Throttle Body Assembly
2008-2010Dodge Grand Caravan Dodge Grand Caravan V6 4.0L Throttle Body Assembly
2009-2010Dodge Journey Dodge Journey V6 3.5L Throttle Body Assembly
2006-2008Dodge Magnum Dodge Magnum V6 3.5L Throttle Body Assembly
2006-2008Dodge Magnum Dodge Magnum V6 2.7L Throttle Body Assembly
2007-2011Dodge Nitro Dodge Nitro V6 4.0L Throttle Body Assembly

Part Interchange

Brand Label Part Number
DIY Solutions ENG00428

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: ENG00428
Product Reviews
5.00/ 5.0 2
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Chrysler Throttle body
January 5, 2020
I have been ordering from one a auto for about a year and a half now and everything that I’ve ordered I’ve been satisfied with and the prices are realistic it’s better than going to the dealer to get parts for my 2007 Chrysler 300.
Chrysler Throttle Body
January 7, 2020
Very nice throttle body - although not needed - (Map Sensor) this was the first time with 1A Auto - I would recommend using them for all your auto needs - very prompt - well packaged - and priced right - and excellent how to videos Can't ask for more
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Dodge Chrysler Throttle Body Assembly DIY Solutions ENG00428-1ATBA00035 does not fit your:



Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.