Replaces

Dodge Chrysler Rear Sliding Door Door Lock Actuator Pair - 1ADRK00120

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

Specifications:

  • Comes as a PAIR
    • Fits LH (Driver Side) and RH (Passenger Side) REAR SIDE SLIDING DOOR
  • Replaces dealer part numbers: 4717960AC, 4717961AB
  • Electric operation
  • Correct electrical connection
  • Direct bolt on
  • Built to strict quality control standards

 

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Door Panel (0:39)
    • Pull the top panel towards the back of the door outwards to release the lower clips.
    • Remove the Phillips screw in the cup at the top of the door.
    • Pull outward to release the clips. Continue pulling on the sides of the door until the panel is free.
    • Lift the panel up and over your lock.
    • Peel back the water shield.
  2. step : Removing the Door Lock Actuator (1:46)
    • Remove the sound block from the back of the door.
    • Follow the rod to the clip. Release the clip and pull the rod out.
    • Remove the T15 screw from the actuator.
    • Pull the actuator free.
    • Press the tab of the harness and pull to disconnect.
  3. step : Installing a New Lock Actuator (2:35)
    • Undo the Phillips screw on the actuator and to change the arm on the actuator. Red clip is driver side. Green clip is passenger side.
    • Line the actuator up with the slot. Slide it into place and replace the T15 screw.
    • Plug in the harness.
    • Reclip the arm.
    • Test the door.
  4. step : Replacing the Door Panel (5:20)
    • Reinsert the sound-ending block.
    • Replace the water shield.
    • Lift the door panel up over the lock and push the pins into place.
    • Snap the upper panel back into place.
    • Replace the screw in the cup.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

  • Star Drivers & Sockets

  • T15 Torx Driver

4.23/ 5.0
13 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
10
0
1
0
2
Sucks. Already failing.
The driver side actuator is already failing. I have to manually pull up the lock sometimes.
July 3, 2017
Awesome
Awesome Parts very helpful website just had an awesime experience with this product and company. Will defenitly do more business with this company.
October 28, 2017
fit perfect
fit perfect . video helped alot. ... had to drill hole on right side door to get to small screw that holds it in place . left side had hole from factory. works now on both sides
January 14, 2018
Need to get a new Suppiler for this part!!!
I order this part a little over a year ago and already have had to replace both side THREE TIMES! When I replaced the part the first time, I took apart the old one, and saw that the plastic gear binds on one end where the gear teeth meets the metal electric motor gear. I just had to get a replacement actuator in June 2018 to replace Another failed one, but NOW that new one is starting to fail. Looking at the insides of the last six actuator that I HAD to replace, all had the same problem; "Plastic Gear grinds on one end of gear teeth!!!!". Just send me a hand full of plastic gears to just replace the damage ones!!! Had a college Mechanic instructor check out the part and he told me that the plastic gear is slightly to small for the part, thats why it binds. He even check out the doors that the actuator fits in to see if something was causing it to bind up, but nothing, everything worked smoothly! It really wouldnt be that big of a deal, but when the part fails, it wont let me unlock the door manually due to it binding up, causing a safety problem if someone had to get out of the vehicle!!!! BTW, Im not the one who made this part a lifetime warranty, so if your Customer support people have a problem, "and the last one I talked to gave me a hard time getting a replacement part," then you guys need NOT make it a lifetime part!!!
July 4, 2018
Fits 2016 Dodge Grand Caravan
Fast shipping, best price around, lifetime warranty. These DO fit the 5th generation Grand Caravans. I put them on my 2016. Not an easy job, check out youtube for a good video. My locks were buzzing loudly when actuated. Yes, the door locks on my 2016 are broken already. I blame the kids, but thats another story... I disassembled the old ones when I got them out and found the culprit to be a stripped plastic gear. The reason this part (1ADLA00087 individually or 1ADRK00120 for the pair) is only listed up to the 2007 models is because of the vehicle manufacturer. FCA wants you to replace the entire assembly (rear latch/closing motor/child lock and lock actuator) when any one of the sub-components breaks.
July 5, 2018
Door actuators
They were delivered fast they worked great I would buy them from you again if I needed him and I really appreciate your service thank you very much Dennis Williams
August 4, 2018
Perfect!
The parts showed up fast and were exactly what I needed! I watched the video they have on the installation and everything worked! I couldnt be happier. Will definitely buy here again.
August 27, 2018
door lock actuator
Great price, part fit without any problems.Will recommend 1a auto to everyone and for my future needs. Also videos are very helpful. Fast shipping. Thank you
September 6, 2018
Happy camper
The parts came quick and they were easy to install and the price I paid for 2 was the price for one around my area. Very pleased with my purchase
October 17, 2018
1a door actuator install
weather has not cooperated since receiving parts. will install asap weather permits
January 1, 2019
Took trial and error, but they work
Id be lost without YouTube. Videos showed how to install these and pointed me to 1A Auto. Low prices and the parts fit my 2006 Chrysler Town & Country.
May 11, 2019
1ADRK00120-Dodge Chrysler Sliding Door Rear Door Lock Actuator Pair
Good for 2006 Dodge Grand Caravan. Excellent products.
October 7, 2019
Great replacement locks
These locks did just the trick for my 2006 Chrysler Town and Country. However, two good things to know: First, the 1AAuto Youtube video was great in its description of replacement of the driver side lock. But in order to install the alternate arm, you need a no. 8 torx head driver. It appeared in the video he just used a screwdriver. Maybe they changed the part since the video was made? I dont know. Second, the passenger side is different and required partial removal of the entire lock assembly. Removal was easy (3 screws). But getting it back in by myself was very difficult. Get a helper!
November 16, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2007Chrysler Town & Country Chrysler Town & Country Rear Sliding Door Door Lock Actuator Pair
2001-2003Chrysler Voyager Chrysler Voyager Rear Sliding Door Door Lock Actuator Pair
2001-2007Dodge Caravan Dodge Caravan Rear Sliding Door Door Lock Actuator Pair
2001-2007Dodge Grand Caravan Dodge Grand Caravan Rear Sliding Door Door Lock Actuator Pair
Part 1ADRK00120
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.