1ABDS00255-Dodge Chrysler Rear Parking Brake Shoe Set

Replaces

Dodge Chrysler Rear Parking Brake Shoe Set DIY Solutions

1ABDS00255

Part Details

  • Includes: Hardware

This part replaces:

  • DIY Solutions BFS03558
FREE SAME DAY SHIPPING
Save 29%
List: $83.95 Save: $24.00
Only 7 left in stock
Part 1ABDS00255
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: BFS03558

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Includes:   Hardware

This parking brake shoe set with hardware is just what you need to get your vehicle stopping in good order again!

Parking Brake Shoe Specifications:

  • 4 Piece Rear Parking Brake Shoe Set
  • Replaces dealer part numbers: 05080568AA, 5080568AB, 5093703AA
  • Direct replacements
  • Professional Grade Shoe Set
  • Correct for models with rear disc brakes

Parking Brake Hardware Specifications:

  • Will service both LH (Driver Side) & RH (Passenger Side) REAR PARKING BRAKES
  • Kit includes:
    • 6 Springs
    • 4 Retainers
    • 4 Pins
    • 2 Adjusters
  • Direct replacements
  • Built to strict quality control standards

This rear parking brake shoe with hardware makes great replacements and have excellent value over the price of the dealer parts.

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:52)
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Caliper (2:01)
    • Remove the 21mm bolts from the caliper carrier
    • Secure the caliper bracket and caliper with a bungee chord
  3. step : Removing the Rotor (2:27)
    • If the rotor is frozen, make sure the e-brake shoes are spun down if they're contacting the rotor
    • Tap the rotor from the front with a hammer without damaging the hub's studs
    • Pull the rotor off
  4. step : Removing the Brake Shoes (3:14)
    • Chisel off the rear retaining pin with a hammer and pick
    • Remove the two brake shoe springs with the vise grip pliers, beginning with the bottom
    • Remove the brake adjuster
    • Remove the rear brake shoe from the mechanism at the top
    • Remove the brake shoes
  5. step : Installing the Brake Shoes (5:25)
    • Be sure that the larger, single groove is on the bottom
    • Thread the upper shoe spring into the shoes
    • Place the shoes onto the hub
    • Pry out the shoes and insert them into the mechanism
    • Twist on the front retaining spring with vise grip pliers
    • Put the adjuster into place
    • Insert the lower spring in with vise grip pliers
    • Thread the retaining pin into the brake shoe
    • Lock the pin onto the holder
    • Repeat the steps on the opposite side
  6. step : Reinstalling the Rotor (9:12)
    • Remove surface rust or scaling from the hub with a wire brush
    • Apply brake grease to the hub without touching the studs
    • Insert the rotor into place
    • Apply brakes parts cleaner to the rotor
    • Put your truck in neutral
    • Check that the rotor spins freely - a little resistance is ok
    • Adjust the e-brake shoes with the star wheel if needed
  7. step : Reinstalling the Caliper (11:35)
    • Remove the bungee chord from the caliper
    • Insert the caliper into place
    • Tighten the two 21mm bolts into the caliper bracket
    • Torque the 21mm bolts to 100 foot-pounds
  8. step : Reinstalling the Wheel (12:19)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Chisel
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 22mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2007-2009Chrysler Aspen Chrysler Aspen Rear Parking Brake Shoe Set
2007-2009Dodge Durango Dodge Durango Rear Parking Brake Shoe Set
2007-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck Crew Cab Rear Parking Brake Shoe Set
2007-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck Regular Cab Rear Parking Brake Shoe Set
2009-2010Dodge Ram 1500 Truck Dodge Ram 1500 Truck Rear Parking Brake Shoe Set

Part Interchange

Brand Label Part Number
DIY Solutions BFS01516

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: BFS03558
Product Reviews
5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Fit perfectly! Video was very helpful.
August 29, 2019
just cant ask for anything better.
price, quality, service, response time, selection, and shipping. very happy with it all.
September 12, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Dodge Chrysler Rear Parking Brake Shoe Set DIY Solutions-1ABDS00255 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.