DMFWM00003-Dodge Chrysler Ram Mitsubishi Transfer Case Shift Motor

Replaces

Dodge Chrysler Ram Mitsubishi Transfer Case Shift Motor Dorman 600-935

DMFWM00003

This part replaces:

  • Dorman 600-935
  • Hollander 420-00160
  • OE # 5143477AA
FREE SAME DAY SHIPPING
Save 32%
List: $435.95 Save: $141.00
Only 1 left in stock
Part DMFWM00003
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Dorman
Brand #: 600-935

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

DORMAN TRANSFER CASE MOTOR: 600-935

Specifications:

  • Brand New Transfer Case Shift Motor
  • Direct replacement
  • Built to strict quality control standards
  • 7 Pin Connector

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Driveshaft (0:52)
    • Have an assistant hold the driveshaft in place or brace it with a pry bar
    • Remove the 15mm bolts at the front of the driveshaft
    • Cut the dust boot clamp at the rear of the drive shaft with pliers
    • Index the drive shaft with a marker for reinstallation
    • Index the boot on the rear of the drive shaft with a marker
    • Separate the front of the driveshaft from the transmission and let it hang
    • Separate the rear of the driveshaft from the splines
    • Pull the driveshaft down and out starting from the rear
  2. step : Removing the Transfer Case Shift Motor (2:37)
    • Pry the red tab on the wiring harness and disconnect the wiring harness
    • Remove the three 10mm bolts from the transfer case shift motor
    • Pry and wiggle the transfer case motor off its splines
  3. step : Installing the Transfer Case Shift Motor (3:25)
    • Make sure the shaft is in the correct position
    • Mount it with a pair of pliers if necessary
    • Make sure the truck is in 2WD, the drive shaft will be still and the splines will rotate freely
    • Insert the transfer case shift motor into place
    • Tighten the 10mm bolts to the transfer case shift motor
    • Torque the bolts to 17 foot-pounds
    • Reconnect the wiring harness
    • Slide the red safety tab into place
  4. step : Installing the Driveshaft (4:48)
    • Lift the new driveshaft into place starting with the rear
    • Align the index on the rear
    • Replace the dust boot clamp
    • Align the index on the front
    • Tighten the 15mm bolts to the front of the driveshaft
    • Hold the drive shaft with a pry bar
    • Torque the bolts to 85 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • 1 Inch Hose Clamps
  • Marker / Writing Utensil

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 15mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2007-2009Chrysler Aspen Chrysler Aspen with NV244 Transfer Case Transfer Case Shift Motor
2005-2010Dodge Dakota Dodge Dakota Transfer Case Shift Motor
2004-2009Dodge Durango Dodge Durango with NV244 Transfer Case Transfer Case Shift Motor
2006-2010Dodge Ram 1500 Truck Dodge Ram 1500 Truck with NV243 Transfer Case Transfer Case Shift Motor
2006-2010Dodge Ram 2500 Truck Dodge Ram 2500 Truck with NV273 Transfer Case Transfer Case Shift Motor
2006-2010Dodge Ram 3500 Truck Dodge Ram 3500 Truck with NV273 Transfer Case Transfer Case Shift Motor
2006-2009Mitsubishi Raider Mitsubishi Raider Transfer Case Shift Motor
2011-2012Ram 1500 Truck Ram 1500 Truck with NV243 Transfer Case Transfer Case Shift Motor
2011-2012Ram 2500 Truck Ram 2500 Truck with NV273 Transfer Case Transfer Case Shift Motor
2011-2012Ram 3500 Truck Ram 3500 Truck with NV273 Transfer Case Transfer Case Shift Motor

Part Interchange

Brand Label Part Number
DIY Solutions TRP00307

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
Dorman
Brand #: 600-935
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Replacement shift motor
Before I bought this part, my 07 Ram would not go in 4 wheel drive, after installing it, I now have 4 wheel drive again. Thanks 1aauto parts !
December 22, 2018
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Dodge Chrysler Ram Mitsubishi Transfer Case Shift Motor Dorman 600-935-DMFWM00003 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.