1ASFU00032-Dodge Chrysler Plymouth Front Passenger Side Upper Control Arm with Ball Joint

Replaces

Dodge Chrysler Plymouth Front Passenger Side Upper Control Arm with Ball Joint DIY Solutions

1ASFU00032

This part replaces:

  • Dorman 520-370
  • OE # 4616922
  • Mevotech CMS20364
  • Moog RK620240
  • DIY Solutions SUS05062
  • Hollander 511-01131R
  • Hollander 511-01050R
  • Hollander 511-01076R
  • OE # 4764408
  • OE # 4782974
FREE SAME DAY SHIPPING
Save 33%
List: $74.95 Save: $25.00
Part 1ASFU00032
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: SUS05062
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

This replacement front upper control arm is just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Fits RH (Passenger Side) FRONT UPPER
  • Replaces dealer part numbers: 4616922, 4764408, 4782974, 4764408AC, 4782974AB, 4782974AE
  • Includes new ball joint
  • Bushings not included
  • Control arm is new, not remanufactured or refurbished

Worn ball joints or loose rear bushings can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace that heavily rusted, rotted, or damaged front upper control arm with the loose bushings or worn ball joints with our high quality all in one replacement.

One way to diagnose a loose, or warn ball joint on a control arm, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint and bushings for play, if it is moving you probably need to replace it.

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

    It is recommended to receive a professional alignment after completing this repair

  1. step : Removing the Wheel (0:43)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:05)
    • Use a pair of pliers to straighten the cotter pin and remove it
    • Remove the castle nut with an adjustable wrench
    • Measure the distance from the inner tie rod to the outer tie rod
    • Loosen the nut between the inner and outer tie rod
    • Hammer the knuckle to loosen the outer tie rod
    • Remove the outer tie rod and twist it off the inner tie rod
  3. step : Installing the Outer Tie Rod (2:05)
    • Twist the grease filler into the new outer tie rod
    • Twist the outer tie rod to the inner tie rod
    • Measure the distance and make sure it matches the recorded distance
    • Tighten the nut between the inner and outer tie rod
    • Insert the outer tie rod to the knuckle
    • Replace and tighten the castle nut while lining up the cotter pin hole
    • Insert the cotter pin and twist the ends with a pair of pliers
    • Fill up the grease filler with a grease gun
  4. step : Reattaching the Wheel (3:21)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Hammer
  • Measuring Tape
  • Floor Jack
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Specialty Tools

  • Grease Gun

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1995-2000Chrysler Cirrus Chrysler Cirrus Front Passenger Side Upper Control Arm with Ball Joint
1997-2000Chrysler Sebring Chrysler Sebring Front Passenger Side Upper Control Arm with Ball Joint
2001-2006Chrysler Sebring Chrysler Sebring Convertible Front Passenger Side Upper Control Arm with Ball Joint
2001-2006Chrysler Sebring Chrysler Sebring Sedan Front Passenger Side Upper Control Arm with Ball Joint
1995-2000Dodge Stratus Dodge Stratus Front Passenger Side Upper Control Arm with Ball Joint
2001-2006Dodge Stratus Dodge Stratus Sedan Front Passenger Side Upper Control Arm with Ball Joint
1996-2000Plymouth Breeze Plymouth Breeze Front Passenger Side Upper Control Arm with Ball Joint

Part Interchange

Brand Label Part Number
ACDelco 45D1202
CARQUEST CA334B
Centric Parts 623.63011
Chrysler 4764408AB
Chrysler 4782974AD
Chrysler 4782974AA
Chrysler 4616946
Chrysler 4782974AB
Chrysler 4782974AC
Chrysler 4764408AC
Chrysler 4782974AE
Chrysler 04782974AB
Chrysler 4764408
Chrysler 4782974
Chrysler 4616922
DIY Solutions SUS05062
Dorman 520-370
Dorman - OE Solutions 520-370
Dorman OE Solutions 520-370
Ingalls Engineering CAK620240
MAS Industries CB81008PR
MAS Industries CB81148
MAS Industries CB81508
MAS Industries CB81008
MOOG CK620240
MOOG K620240
MOOG RK620240
MOOG Chassis Products RK620240
MOOG Chassis Products K620240
MOOG Chassis Products CK620240
Mcquay-Norris FA4918
Mevotech CMS20364
Mevotech GS20364
Mevotech MS20364
NAPA 260-5796
NAPA Premium 2605796
Precision Driveline CB25023
Raybestos Chassis 502-1196
SYD 1506024

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: SUS05062
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Riding smoothly
when I put this on my car it fixed my alignment issue, my car takes bumps and rides like a dream
April 15, 2018
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Dodge Chrysler Plymouth Front Passenger Side Upper Control Arm with Ball Joint DIY Solutions-1ASFU00032 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.