TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Direct Bolt-on Replacement: No modifications or special tools required
Complete Assembly: includes same mirror glass, housing, bracket and technology as the original unit
DOT Certified: Built to the highest quality standards
FMVSS-111 Compliant: Validated to be a dealership alternative
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Side View Mirrors 2001-06 Dodge Stratus
Created on:
Tools used
Flat Blade Screwdriver
Phillips Head Screwdriver
Putty Knife
8mm Socket
Ratchet
1. Removing the Door Panel
Pry up the trap door in the pull cup.
Pry off the trap door behind the door handle.
Remove the two Phillips screws just uncovered.
Remove the four screws around the outside of the door panel.
Pull the triangle trim piece off the door.
Use a putty knife to pry out the first clip behind the door. Pull the door panel along the edges to release the clips.
Disconnect the door handle rod and the harnesses from the back of the door panel.
2. Removing the Side Mirror
Disconnect the mirror harness from the door.
Remove the two 8mm nuts and one 8mm bolt that secure the mirror in place.
Pull the mirror free.
3. Replacing the Side Mirror
Run the harness through the door.
Replace the nuts and bolt that secure the mirror.
Reconnect the mirror harness.
4. Replacing the Door Panel
Reconnect the harnesses to the door panel.
Reconnect the door handle rod.
Put the panel over the lock tab.
Line up the door panel and push into place. Hit around the edges to push the clips in.
Replace the six Phillips screws.
Replace the triangle trim panel.
Close the trap doors behind the door handle and in the pull cup.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video we're going to show you how to replace the side rear-view mirror the driver side on this 2004 Dodge Stratus. The procedure is pretty much the same for the passenger side. On this vehicle the mirror is fine so we just take it off and put it back on for you to show you how to do it.
Tools you'll need are small flat blade screwdriver, Phillips screwdriver, a putty knife or a door panel clip tool and an 8 mm socket and ratchet. Also an 8mm wrench would work as well.
I use a small flat blade screwdriver and down in the pull cup here, pry out the little trap door. There's a little Phillips screw in there. Then in behind your door handle there's another Phillips screw in there. Then there's three Phillips screws, one there, there, there and then one on the back edge here.
Just going to fast forward as I use a Phillips screwdriver and remove six screws in all. This triangle here you can just pull out. All you need is a putty knife. Going to get down in behind the door panel here, slide it down, pull it up and then start to pull the ends. Then the door panel comes up.
Right here is your lock harness. The little button, press on that to disconnect. On your latch rod there's a clip. I'm just going to reach in behind with my finger. Have that clip off then the rod comes up and off. Then lastly down here is your window harness. There's a button right in the middle. You really got to push that button and then work the harness out. And your door panel's off.
Once your door panel's off you want to check these aqua clip pins here because there could be pins stuck inside of them. Use a pair of needle nose pliers, pull the pins out and then reinstall them on the inside of your door panel. With the door panel off just reach in behind here. There's a little tab to disconnect your mirror. Then there's three, two 8mm nuts here and an 8mm bolt over here. We'll fast forward here as we remove that 8 mm bolt and the two nuts. The mirror comes off.
To reinstall you reverse the procedure. Make sure your harness goes through, goes on. We'll speed it up again here as we put that other nut on and then start our bolt in and then tighten those three fasteners. You want them firm, not too tight. Then reconnect your harness.
Put your door panel back on. First reconnect your power window switch and make sure it clicks. Bring it close and reconnect your power door locks. Take this rod and put it into the hole and slip the clip right around the prong. Make sure your lock goes through. There is a large locating tab that goes into a big whole. Once you've got that you can make sure your pins go in. Peak in back and make sure all the pins go in correctly. Now it's just a matter or replacing all the Phillip screws. We'll speed up as we replace all those screws. There was one down in the door cup, behind the door panel, three at the bottom and then one at the back.
We hope this helps you out. It was brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We are the company that's here for you on the internet and in person.
MRA05460
In Stock
Product Reviews
Loading reviews
4.83/ 5.06
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
1
0
0
0
Mirror Driver Side
J
July 2, 2017
easy to install and works great, would recommend the 1AMRE01151-Mirror Driver Side, 1AMRE01151-Mirror Driver Side
Highly recommend!
S
November 29, 2018
This came in quickly and was a perfect replacement for my broken one.
best service
Dennis
March 9, 2019
great prices and parts are always the right one, website is easy to navigate,, love it
Pleasantly surprised.
John
June 29, 2019
My mirror had been damaged for over 4 years and I was always looking for a replacement. When I found this site I was hoping it would work as the picture looked a little different, but it was an exact replica of my mirror. I highly recommend using these guys for your replacement parts.
Side mirror
C
January 1, 2020
Easy to order and easy installation. Took longer to arrive then I expected
Judith
September 14, 2021
Great service!
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Dodge is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Dodge or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.