1AFIN00025-Dodge Chrysler Fuel Injector

Replaces

2009 Dodge Nitro V6 4.0L (8th Vin Digit X) Fuel Injector

1AFIN00025-630773-2009
Guaranteed to fit: 2009 Dodge Nitro

Fit Details

  • Engine Displacement (Metric): V6 4.0L
  • VIN Code: 8th Vin Digit X

This part replaces:

  • Hollander 322-05423
  • Standard Motor Products FJ612
  • OE # 4591986AA
FREE SAME DAY SHIPPING
Save 32%
List: $43.95 Save: $14.00
Part 1AFIN00025
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: FIC00081

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

This replacement fuel injector is just what you need to get your vehicle in good running condition again!

Specifications:

  • Brand New Fuel Injector
  • Replaces dealer part number: 4591986AA
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested
  • Sold individually
  • Correct for models with the following engines per application:
    • V6 2.7L
    • V6 3.5L
    • V6 4.0L

NOTE: Sold as a single (1) injector. For a set of 6, please see our other listings.

Some symptoms of a bad fuel injector are: Stalling, hard starting, hesitation on acceleration, as well as a possible service engine light, and error code.

Your engine size can usually be found on a white sticker in the engine compartment near the radiator. If needed, your VIN code is the 8th digit of your vehicles Vehicle Identification number. The VIN can be found on the bottom driver side corner of the windshield and on your registration. Some refer to the VIN code as the Serial Number.

 

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Release the pressure from the fuel system (0:48)
    • With the engine running, remove the fuel pump relay from the fuse block.
    • This will stop the engine and release the pressure in the fuel system.
  2. step : Remove the upper intake manifold. (0:55)
    • Use a 10 mm socket and ratchet to remove the upper intake manifold.
    • Disconnect the air pressure sensor.
    • Remove the 8 ten mm bolts.
  3. step : Remove the air box (1:40)
    • Loosen the clamp and the bolt securing the air box.
    • Disconnect the hose and wiring harness.
    • Remove the 13 mm bolt that goes into the throttle body and brace.
    • Pull the gasket off the top of the cowl and now you can remove your intake manifold.
  4. step : Remove the fuel injectors (2:17)
    • Remove the four 10 mm bolts under the intake manifold to get at the fuel rails.
    • Pull the fuel rails up and out.
    • Stuff a clean rag in the intake to keep anything from falling into it. (this would be bad)
    • Disconnect the wiring harness connectors from the injector.
    • Unclip the fuel injector.
  5. step : Install the new fuel injector (3:35)
    • Clip in the new fuel injector.
    • Plug in the wiring connector.
    • Once you’ve replaced all the injectors, begin reassembly.
  6. step : Reassemble the intake manifold (4:07)
    • Push your fuel rails back into place.
    • Apply some loc-Tite to the four 10 mm bolts and snug them down with a socket and ratchet.
    • Bolt down the intake manifold.
    • Torque the 10 mm bolts to 105 inch/pounds
  7. step : assemble everything else (5:13)
    • Reconnect the air pressure sensor
    • Bolt in the 13 mm bolts securing the bracket to the throttle body, and torque to 15 foot/lbs
    • Reinstall the air box.
    • Tighten the clamp that connects the intake to the throttle body
    • Reconnect the hose and double check all of your sensors are connected.
    • Reinstall the fuel pump relay.
    • Seat the cowl gasket.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Liquid Thread Locker

  • Ratchets & Related

  • Torque Wrench
  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 11mm Socket
  • 10mm Socket
  • 12mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2005-2008Chrysler 300 Chrysler 300 V6 3.5L (8th Vin Digit G) Fuel Injector
2005-2008Chrysler 300 Chrysler 300 V6 2.7L (8th Vin Digit R) Fuel Injector
2009-2010Chrysler 300 Chrysler 300 V6 3.5L (8th Vin Digit V) Fuel Injector
2009-2010Chrysler 300 Chrysler 300 V6 2.7L (8th Vin Digit D) Fuel Injector
2005-2006Chrysler Pacifica Chrysler Pacifica V6 3.5L (8th Vin Digit 4) Fuel Injector
2007-2008Chrysler Pacifica Chrysler Pacifica V6 4.0L (8th Vin Digit X) Fuel Injector
2004-2008Chrysler Sebring Chrysler Sebring V6 2.7L (8th Vin Digit R) Fuel Injector
2004-2006Chrysler Sebring Chrysler Sebring V6 2.7L (8th Vin Digit T) Fuel Injector
2007-2008Chrysler Sebring Chrysler Sebring V6 3.5L (8th Vin Digit M) Fuel Injector
2009-2010Chrysler Sebring Chrysler Sebring V6 3.5L (8th Vin Digit V) Fuel Injector
2009-2010Chrysler Sebring Chrysler Sebring V6 2.7L (8th Vin Digit D) Fuel Injector
2008-2010Chrysler Town & Country Chrysler Town & Country V6 4.0L (8th Vin Digit X) Fuel Injector
2008-2009Dodge Avenger Dodge Avenger V6 2.7L (8th Vin Digit R) Fuel Injector
2008Dodge Avenger Dodge Avenger V6 3.5L (8th Vin Digit M) Fuel Injector
2009-2010Dodge Avenger Dodge Avenger V6 3.5L (8th Vin Digit V) Fuel Injector
2009-2010Dodge Challenger Dodge Challenger V6 3.5L (8th Vin Digit V) Fuel Injector
2006-2008Dodge Charger Dodge Charger V6 2.7L (8th Vin Digit R) Fuel Injector
2006-2008Dodge Charger Dodge Charger V6 3.5L (8th Vin Digit G) Fuel Injector
2009-2010Dodge Charger Dodge Charger V6 2.7L (8th Vin Digit D) Fuel Injector
2009-2010Dodge Charger Dodge Charger V6 3.5L (8th Vin Digit V) Fuel Injector
2008-2010Dodge Grand Caravan Dodge Grand Caravan V6 4.0L (8th Vin Digit X) Fuel Injector
2009-2010Dodge Journey Dodge Journey V6 3.5L (8th Vin Digit V) Fuel Injector
2005-2008Dodge Magnum Dodge Magnum V6 3.5L (8th Vin Digit V) Fuel Injector
2005-2008Dodge Magnum Dodge Magnum V6 2.7L (8th Vin Digit T) Fuel Injector
2007-2008Dodge Nitro Dodge Nitro V6 4.0L (8th Vin Digit 6) Fuel Injector
2009-2011Dodge Nitro Dodge Nitro V6 4.0L (8th Vin Digit X) Fuel Injector
2004-2006Dodge Stratus Dodge Stratus V6 2.7L (8th Vin Digit R) Fuel Injector
2004-2006Dodge Stratus Dodge Stratus V6 2.7L (8th Vin Digit T) Fuel Injector

Part Interchange

Brand Label Part Number
DIY Solutions FIC00081

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: FIC00081
Product Reviews
5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Fuel injectors
Exactly what I needed. Great shipping and handling.
January 27, 2018
Recommend 1a auto for any model car or truck
I always recommend 1a auto the order always correct plus the people are so nice and patient with me all parts are guaranteed with a warranty plus the shipping is ok prices are affordable and great thanks for your great business
August 27, 2018
Best After market parts
Parts were clean, show no wear and tear. They worked great.
January 4, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Dodge is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Dodge or FCA US LLC. See all trademarks.

Dodge Chrysler Fuel Injector-1AFIN00025 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2009 Dodge Nitro with these options.