1APBS00023-Dodge Chrysler Front Semi-Metallic Performance Brake Pad & Rotor Kit

Replaces

Dodge Chrysler Front Semi-Metallic Performance Brake Pad & Rotor Kit TRQ Performance BKA12055

1APBS00023
FREE SAME DAY SHIPPING
Save 36%
List: $162.95 Save: $58.00
Part 1APBS00023
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ Performance
Brand #: BKA12055

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Brake Pad Friction Material:   Semi-Metallic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Front Brake Rotor Diameter:   12.60 in. (320mm)
  • Brake Rotor Coating:   Premium G-Coated
  • Front Brake Rotor Venting Type:   Vented
  • Kit Includes:
      (1) Front Semi-Metallic Brake Pad Set
      (2) Front Performance Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware
  • Product Line:   Performance

Premium Positive Molded Brake Pads Features and Benefits

  • Same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims & pad chamfering provide smooth & quite braking
Performance Brake Kit Features and Benefits
  • Longer life - Positive molded to ensure even wear and enhanced performance
  • Less dust - Cleaner, quieter, smoother, includes 3 layer OE-grade shims
  • Better stopping power - Cross-drilled and slotted to reduce brake fade
  • Durable - True non-interference vane design for structural integrity and cooling

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (1:00)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:31)
    • Hold the wheel studs with a brake rotor
    • Remove the two 13mm bolts from the caliper bracket
    • Pull the caliper off
    • Put the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (1:55)
    • Remove the two 18mm bolts from the caliper bracket
    • Pull off the brake caliper bracket
    • Strike the drum surface of the rotor with a hammer to loosen the rotor
    • Pull the rotor off
    • Clean the hub surface with a wire brush
  4. step : Preparing the New Brake Pads and Rotors (3:14)
    • Pry off the brake pad shims with a flat blade screwdriver
    • Clean the brake pad shims with a wire brush
    • Clean the caliper bracket with a wire brush
    • Apply brake grease to the shim-mounting area of the caliper bracket
    • Place the shim onto the caliper bracket
    • Apply grease to the caliper shims
    • Pull out the caliper slides
    • Apply grease to the caliper slides
    • Push the caliper slide into the caliper
  5. step : Installing the Brake Rotor (5:36)
    • Apply grease to the hub surface
    • Put the rotor onto the hub backwards
    • Spray the rear of the hub with brake cleaner
    • Pull off the brake rotor
    • Slide the brake rotor on
    • Spray the front of the rotor with brake cleaner
    • Put the caliper bracket into place
    • Insert the two 18mm bolts into the caliper bracket
    • Tighten the two 18mm bolts to 70 foot-pounds of torque
  6. step : Installing the Brake Pads (7:05)
    • Put the brake pads into the caliper bracket
    • Apply grease to the back of the brake pads
    • Push back the caliper piston with grove lock pliers
    • Put the brake caliper into place
    • Insert the two 13mm bolts into the caliper
    • Tighten the two 13mm bolts to 44 foot-pounds of torque
  7. step : Reattaching the Wheel (8:08)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Anti-Seize Grease
  • Gloves
  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set


Fits the following Makes:

Year Make Model Description
2005-2010Chrysler 300 Chrysler 300 with 12.6 in. (320mm) Diameter Rotors Front Semi-Metallic Performance Brake Pad & Rotor Kit
2009-2010Dodge Challenger Dodge Challenger V6 3.5L Front Semi-Metallic Performance Brake Pad & Rotor Kit
2011-2016Dodge Challenger Dodge Challenger V6 3.6L Front Semi-Metallic Performance Brake Pad & Rotor Kit
2006-2016Dodge Charger Dodge Charger with 12.6 in. (320mm) Diameter Rotors Front Semi-Metallic Performance Brake Pad & Rotor Kit
2005-2008Dodge Magnum Dodge Magnum with 12.6 in. (320mm) Diameter Rotors Front Semi-Metallic Performance Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 53022
Bendix PRT5650
DIY Solutions BFS01678
DuraGo BR53022
Raybestos EHT1056H
Raybestos SP1056XPH
Raybestos Brakes SP1056XPH
Raybestos Brakes EHT1056H
Raybestos Brakes 780255
Wagner BD126263

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ Performance
Brand #: BKA12055
Product Reviews
5.00/ 5.0 5
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
0
0
0
0
Recommend
January 13, 2019
Good price good service quick delivery fit my 300 perfect....will use again
Great product
April 13, 2019
Arrived fast and in great condition . super easy to find my parts on this site with great deals on parts
Rotors
July 1, 2019
Excellent!
Fast shipping
August 29, 2019
I've bought a few things from this company, always came in on time and awesome quality!
November 11, 2019
I would recommend 1A Auto to anyone
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Dodge Chrysler Front Semi-Metallic Performance Brake Pad & Rotor Kit TRQ Performance BKA12055-1APBS00023 does not fit your:




Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.