Replaces

Dodge Chrysler Front Driver or Passenger Side Wheel Bearing & Hub Assembly TRQ

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing

This replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part number: 4779199AA
  • Fits 5 Lug Wheel
  • Studs already installed
  • Direct replacement
  • Built to strict quality control standards
  • Fits RWD (Rear Wheel Drive) Models only
    • Does NOT fit AWD (All Wheel Drive) Models

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

BHA54066 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (1:09)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:21)
    • Hold the wheel studs with a brake rotor
    • Remove the two 13mm bolts from the caliper bracket
    • Pull the caliper off
    • Put the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (1:46)
    • Remove the two 18mm bolts from the caliper bracket
    • Pull off the brake caliper bracket
    • Strike the drum surface of the rotor with a hammer to loosen the rotor
    • Pull the rotor off
    • Clean the hub surface with a wire brush
  4. step : Removing the Hub Assembly (2:12)
    • Tap between the hub and dust cover with a hammer and chisel
    • Remove the dust cover
    • Remove the 35mm center nut
    • Remove the wheel hub and bearing
  5. step : Installing the Hub Assembly (4:03)
    • Insert the wheel hub into the spindle
    • Install the 35mm nut
    • Torque the nut to 184 foot-pounds
    • Install the dust shield
  6. step : Preparing the New Brake Pads and Rotors (5:00)
    • Pry off the brake pad shims with a flat blade screwdriver
    • Clean the brake pad shims with a wire brush
    • Clean the caliper bracket with a wire brush
    • Apply brake grease to the shim-mounting area of the caliper bracket
    • Place the shim onto the caliper bracket
    • Apply grease to the caliper shims
    • Pull out the caliper slides
    • Apply grease to the caliper slides
    • Push the caliper slide into the caliper
  7. step : Installing the Brake Rotor (7:23)
    • Apply grease to the hub surface
    • Put the rotor onto the hub backwards
    • Spray the rear of the hub with brake cleaner
    • Pull off the brake rotor
    • Slide the brake rotor on
    • Spray the front of the rotor with brake cleaner
    • Put the caliper bracket into place
    • Insert the two 18mm bolts into the caliper bracket
    • Tighten the two 18mm bolts to 70 foot-pounds of torque
  8. step : Installing the Brake Pads (8:49)
    • Put the brake pads into the caliper bracket
    • Apply grease to the back of the brake pads
    • Push back the caliper piston with grove lock pliers
    • Put the brake caliper into place
    • Insert the two 13mm bolts into the caliper
    • Tighten the two 13mm bolts to 44 foot-pounds of torque
  9. step : Reattaching the Wheel (9:53)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Rubber Mallet
  • Chisel
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Anti-Seize Grease
  • Brake Parts Cleaner
  • Gloves
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 35mm Socket
  • Complete Metric Socket Set

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2005-2011Chrysler 300 Chrysler 300 Rear Wheel Drive Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2012-2014Chrysler 300 Chrysler 300 SRT8 Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2008-2011Dodge Challenger Dodge Challenger Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2012-2014Dodge Challenger Dodge Challenger SRT8 Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2006-2011Dodge Charger Dodge Charger Rear Wheel Drive Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2012-2014Dodge Charger Dodge Charger SRT8 Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2005-2008Dodge Magnum Dodge Magnum Rear Wheel Drive Front Driver or Passenger Side Wheel Bearing & Hub Assembly

Part Interchange

Brand Label Part Number
Chicago Rawhide BR930359
Chrysler 4779199AA
Chrysler 04779199AA
Drive Tech America NT513224
GMB 799-0160
MOOG Hub Assemblies 513224
Mevotech H513224
Raybestos 713224
Raybestos Brakes 713224
SKF BAF-5010-C
SKF BR930359
Timken HA590030

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Product Reviews
3.67/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
2
It lasted about 6 months, car is parked until i get to replace it again! Price and service was great, quality seems to be lacking
March 22, 2017
Great Service great parts. Im telling everybody. Thank you 1A Auto.
June 16, 2017
Wheel bearing work great
Hey 1a is the best I shop with them all the time. Wouldn’t order part from another online dealer if I had a chance, man I love fast delivery right to your door step .
January 3, 2018
Not to happy
Mine only lasted a couple months befor i heard again wasnt to happy with these had to buy moogs and the noise went away would not buy again i guess somethings u should try and save money one lol
November 10, 2018
Best Auto on line
On time best prices great warranties online videos to help on hand directions for almost about every part that needs to be changed definitely will go back and definite recommend
December 29, 2019
Charger Parts
All parts (hubs/ball joints/rotors) fit perfectly. Ordering TRQ brake, wheel and steering parts for a year or better. No problems yet.
May 11, 2020
Part 1ASHF00369
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BHA54066