1AZCC00025-Dodge Chrysler Eagle Combination Switch


Dodge Chrysler Eagle Combination Switch DIY Solutions


This part replaces:

  • Standard Motor Products DS-735
  • OE # 4607001
  • OE # 4760437AB
  • OE # 4760437
  • DIY Solutions BSS00600
Save 32%
List: $65.95 Save: $21.00
Part 1AZCC00025
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: BSS00600

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Disconnecting the Battery (0:54)
    • Disconnect the negative battery cable with a 10mm wrench
  2. step : Removing the Steering Column Trim (1:08)
    • Remove the T30 Torx screw from the steering wheel tilt column
    • Tilt the steering wheel up
    • Remove the six T15 screws from the bottom steering column trim panel
    • Pull the bottom trim panel down
    • Lift off the top trim panel
  3. step : Removing the Turn Signal Lever (2:53)
    • Pull the wiring out of its clip
    • Remove the two E6 screws from the turn signal lever
    • Disconnect the turn signal switch wiring harnesses
    • Pull the turn signal up and off the steering column
  4. step : Installing the New Turn Signal Lever (5:36)
    • Put the new turn signal lever into place
    • Connect the turn signal lever wiring harnesses
    • Insert the two E6 screws into the turn signal lever
    • Clip the wiring back into place
  5. step : Reinstalling the Steering Column Panels (7:01)
    • Put the top steering column panel into place
    • Hang the lower steering column panel in place
    • Start the three shorter T15 screws into the bottom steering column panel
    • Position the steering column panels
    • Start the three longer T15 screws into the bottom steering column panel
    • Tighten the six T15 screws
    • Put the tilt lever into place
    • Insert the T30 screw into the tilt lever
  6. step : Reconnecting the Battery (8:21)
    • Reconnect the negative battery cable with a 10mm wrench

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Star Drivers & Sockets

  • T30 Driver
  • T15 Torx Driver
  • E6 Socket

  • Wrenches - Metric

  • 10mm Wrench

Fits the following Makes:

Year Make Model Description
1993-1997Chrysler Concorde Chrysler Concorde Combination Switch
1994-1997Chrysler LHS Chrysler LHS Combination Switch
1994-1996Chrysler New Yorker Chrysler New Yorker Combination Switch
1993-1997Dodge Intrepid Dodge Intrepid Combination Switch
1993-1997Eagle Vision Eagle Vision Combination Switch

Part Interchange

Brand Label Part Number
DIY Solutions BSS00600

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

DIY Solutions
Brand #: BSS00600
Product Reviews
5.00/ 5.0 2
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great price on the part, installation video a bonus!
November 13, 2018
Although a no-name part from Tiawan, it was 1/3rd the price of a Standard branded replacement (no tax or shipping charges either) and works perfectly. Just the ticket for a 24 year-old Dodge Intrepid. The video helped not just with the installation but identifying all the tools needed. Very pleased.
Great parts & prices!
March 7, 2020
Great durable parts & the prices were awesome! I got them in a timely manor & they fit great. Thanks as always!
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Dodge Chrysler Eagle Combination Switch DIY Solutions-1AZCC00025 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.