Specifications:

  • Fits RH (Passenger Side) FRONT
  • Approximate Dimensions (each):
    • Height: 5.00 inches
    • Length: 24.7/8 inches
    • Width: 5.00 inches
  • Built to strict quality control standards

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:42)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 35mm nut but don't remove it
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Axle (1:50)
    • Remove the hub nut
    • Hit the axle with a hammer
    • Remove the two 21mm bolts at the bottom of the strut with a piece of pipe for leverage
    • Hammer the bolts out
    • Place a drip pan underneath the axle
    • Pry from the back of the axle with a pry bar and hammer
    • Hammer the axle again to loosen it
    • Pull the wheel knuckle forward
    • Pull the axle free and move it to the side
    • Hit the axle out of the wheel knuckle with a hammer
    • Pull the axle up and out
  3. step : Installing the Axle (3:40)
    • Push the axle into place
    • Push the wheel knuckle onto the axle and push the axle into place
    • Place the wheel knuckle into the strut and replace the two 21mm bolts
    • Torque the 21mm strut bolts to 130 foot-pounds
    • Replace the hub nut
  4. step : Reattaching the Wheel (5:16)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut
    • Torque the hub nut to 159 foot-pounds
    • Torque the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket
  5. step : Checking the Oil (6:06)
    • Start the car to warm up the transmission
    • Pull out the dipstick
    • Wipe the dipstick clean
    • Recheck the dipstick
    • Replace the amount of oil you need
    • Check the dipstick again

Tools needed for replacement:

    General Tools

  • Drain Pan
  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Transmission Fluid

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 21mm Socket
  • 35mm Socket

4.8 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
1
0
0
0
Fast and Right
These guys know how to get it done. And the great part is, if you are a do it yourself-er like me, they will show you how with their videos. Shipping is always on time and the fit is always right.
Fast and Fits....Great job 1A Auto.....
May 29, 2018
Purchased
1 month ago
Amazing place to order Parts
They were quick on shipping and never had a problem with any parts from here also the price is amazing as well
March 22, 2018
Purchased
3 months ago
cv axle
The Axle was fine. The only thing was that I think could have been better was the snap ring edges could have been not so sharp. That would have made installation a little easer. I know what the purpose of this ring is but I feel it does not have to be so sharp on the edges. YES I would recommend this part.I think it is a very good buy. Thank You. Frank
October 29, 2017
Purchased
8 months ago
Thank you
Easy to order, good part, constant contact on delivery progress. Could not have been a better transaction. Thank you
October 9, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 4 answers
does this have a abs ring ?
andrew d on Apr 23, 2016
BEST ANSWER: No, you may be required to swap your ring onto this axle

Vehicle Fit

  • 2005-2009 Buick Allure Front CV Axle Shaft Passenger Side TRQ CSA82124
  • 1997-2005 Buick Century Front CV Axle Shaft Passenger Side TRQ CSA82124
  • 2005-2009 Buick LaCrosse Front CV Axle Shaft Passenger Side TRQ CSA82124
  • 1997-2004 Buick Regal Front CV Axle Shaft Passenger Side (excluding Supercharged Models) TRQ CSA82124
  • 2000-2003 Chevy Impala Front CV Axle Shaft Passenger Side TRQ CSA82124
  • 2004-2009 Chevy Impala Front CV Axle Shaft Passenger Side (excluding SS Models) TRQ CSA82124
  • 2000-2003 Chevy Monte Carlo Front CV Axle Shaft Passenger Side TRQ CSA82124
  • 2004 Chevy Monte Carlo LS Front CV Axle Shaft Passenger Side TRQ CSA82124
  • 2005-2007 Chevy Monte Carlo Front CV Axle Shaft Passenger Side (excluding SS Models) TRQ CSA82124
  • 1997-2005 Chevy Venture Front CV Axle Shaft Passenger Side TRQ CSA82124
  • 1998-2002 Olds Intrigue Front CV Axle Shaft Passenger Side TRQ CSA82124
  • 1997-2004 Olds Silhouette Front CV Axle Shaft Passenger Side TRQ CSA82124
  • 1998-2003 Pontiac Grand Prix Front CV Axle Shaft V6 3.1L Passenger Side TRQ CSA82124
  • 1998-2007 Pontiac Grand Prix Front CV Axle Shaft V6 3.8L Passenger Side (excluding Supercharged Models) TRQ CSA82124
  • 2008 Pontiac Grand Prix Front CV Axle Shaft V6 3.8L Passenger Side TRQ CSA82124
  • 1999-2005 Pontiac Montana Front CV Axle Shaft Passenger Side TRQ CSA82124
  • 1997-1998 Pontiac Trans Sport Front CV Axle Shaft Passenger Side TRQ CSA82124

This part replaces:

  • Hollander 447-02511R
  • OE # 88965658
  • A1 Cardone 66-1250
  • TRQ CSA82124
Part #: 1AACV00017


TRQ
Brand #: CSA82124

How-to Video:

(06:51 min)