Specifications:

  • Brand new switch
  • Steering wheel mounted
  • Direct replacement
  • Number of switches: 5
  • Color: Black
  • Correct for models with Green back light switch buttons

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Disconnecting the Battery (1:02)
    • Remove the negative battery terminal with an 8mm socket and ratchet
  2. step : Removing the Steering Wheel (1:50)
    • Pry off the trim buttons on the steering wheel
    • Remove the two 8mm bolts
    • Touch metal components
    • Remove the air bag
    • Disconnect the electrical connector from the bag
    • Remove the T50 Torx bolt in the center of the steering wheel
    • Disconnect the cable
    • Work the wheel off
  3. step : Removing the Cruise Control Switches (3:17)
    • Remove the four Phillips head screws from the switches
    • Remove the two Phillips head screws on the back cover
    • Remove the cable switches from the retainer
    • Remove the two spade connectors at the top
  4. step : Installing the Cruise Control Switches (5:07)
    • Insert the connector into place through the wheel
    • Tighten the four Phillips head screws
    • Plug in the switches
    • Insert the back cover into place
    • Tighten the two Phillips head screws
  5. step : Installing the Steering Wheel (6:28)
    • Insert the steering wheel into place
    • Connect the cable
    • Tighten the T50 Torx bolt to the center of the wheel
    • Torque the T50 Torx bolt to 30 foot-pounds
    • Connect the air bag connector
    • Insert the air bag into place
    • Tighten the two 8mm bolts to the wheel
    • Press on the trim buttons
    • Turn the key to the on position
  6. step : Reconnecting the Battery (8:18)
    • Reconnect the negative battery terminal
    • Tighten the terminal with an 8mm socket and ratchet
    • Check the airbag for deployment

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Torx Drivers & Sockets

  • T50 Torx Socket

4.5 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
2
0
0
0
Removed snd replaced cruise control switches 99 ford explorer
I needed to replace the cruise control switches on my 1999 ford explorer. The replacement switch was perfect and the video from 1A showing step by step procedures on how to complete the work was excellent. The price was very good compared to a local auto parts store. I received the part from 1A very quickly one day ahead of the scheduled delivery date. A very positive customer experience.
December 4, 2017
Purchased
3 months ago
Perfect!
Easy to install by following video. Just as good as stock, premium feel!
December 22, 2017
Purchased
2 months ago
Everything was fine except the off button was hard to push and it just didn't snap like the other buttons. but did work. steering wheel needed a puller to remove. other then that video was very helpful
September 23, 2017
Purchased
5 months ago
Crusin'
Recently purchased a cruise switch assembly for a 2001 Ranger. Observed the video to ensure the work was within my capabilities. The part arrived quickly after ordering. It is exactly the same as the originally; only made in China. The installation was similar to the video; one exception being the wheel removal required a puller. Stearing wheel removal tool does not work; gear puller was required to loosen. Assembly was quick and easy. Thanks for posting the video! It takes the nknown outifthe work for a non auto mechanic.
August 20, 2017
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 4 answers
the photos show no switches on the right part. The description says 5 switches. the black photo at the end of the photos shows switches on the right side. What's up?
Butch E on Feb 6, 2018
BEST ANSWER: The right switch has the accel, resume and coast or cancel buttons. Great kit and easy to install.

How-to Video:

(08:45 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Torx Drivers & Sockets

  • T50 Torx Socket



This part replaces:

  • OE # F87Z9C888BB, SW5928

Vehicle Fit

  • 1998-2002 Ford Explorer Cruise Control Switch
  • 2001-2005 Ford Explorer Sport Trac Cruise Control Switch
  • 2004 Ford F150 Heritage Truck Lightning Cruise Control Switch
  • 1999-2004 Ford F150 Truck Lightning Cruise Control Switch
  • 2001-2003 Ford F150 Truck Harley Davidson Edition Cruise Control Switch
  • 1998-2003 Ford Ranger Cruise Control Switch
  • 1998-2001 Mercury Mountaineer Cruise Control Switch
Part #: 1AZCC00178

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More