This crank angle position sensor wheel is a new, aftermarket part. It mounts to the crankshaft behind the timing belt and oil pump sprocket. Over time, as the engine wears, the crankshaft thrust bearings will allow the crankshaft to move back and forth. This movement causes this sensor wheel to scrape against the block eventually causing it to fail. After failure, the crank angle sensor will no longer be able to read this wheel making the engine unable to run.
This crank sensor wheel has the following specifications:
-
Mounts to crankshaft (See diagram)
-
Direct replacement
-
Replaces dealer part number: 1840A006
-
Commonly called "Crank Sensor Blade" by Mitsubishi
-
Correct for 2.0L & 2.4L engines only as listed:
If your crank angle sensor is having reading problems, and this blade is your problem, why not replace it now with this great fitting alternative!
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Acrylonitrile, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.