Specifications:

  • LH (Driver Side) FRONT LOWER
  • Sheet Metal Version
  • Includes new lower arm bushings already installed
  • New, not remanufactured or refurbished
  • Includes lower control arm bracket
  • Does NOT include Ball Joint

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:23)
    • Loosen the lug nut covers with the supplied lug nut tool
    • Loosen the 17mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Control Arm (2:34)
    • Remove the two 16mm bolts from the control arm
    • Remove the 18mm bolt from the control arm
    • Remove the three 16mm bolts from the ball joint
    • Place a lug nut on a ball joint stud
    • Remove the 18mm bolt from the control arm
    • Pry down the control arm from the ball joint
  3. step : Installing the Control Arm (5:29)
    • Insert the control arm into place
    • Tighten the front 18mm bolt to the control arm
    • Tighten the 16mm bolts to the control arm
    • Tighten the 18mm bolt to the control arm
    • Tighten the three 16mm bolts to the ball joint
    • Torque the front 18mm bolt to 70 Newton meters
    • Torque the 16mm ball joint nuts to 16 newton meters
  4. step : Reattaching the Wheel (7:22)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 120 Newton meters in a crossing or star pattern
    • Tighten the lug nut covers

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Sockets - Metric

  • 16mm Socket
  • 17mm Socket
  • 18mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2013 Audi A3 Front Lower Stamped Steel Control Arm Driver Side
  • 2006-2013 Audi A3 Quattro Front Lower Stamped Steel Control Arm Driver Side
  • 2007-2014 VW Eos Front Lower Stamped Steel Control Arm Driver Side
  • 2006-2014 VW GTI Front Lower Stamped Steel Control Arm Driver Side
  • 2010-2014 VW Golf Front Lower Stamped Steel Control Arm Driver Side
  • 2005 VW Jetta Front Lower Stamped Steel Control Arm Driver Side (8th Vin Digit K)
  • 2006-2010 VW Jetta Front Lower Stamped Steel Control Arm Driver Side
  • 2011-2014 VW Jetta Wagon Lower Stamped Steel Control Arm Driver Side
  • 2008 VW R32 Front Lower Stamped Steel Control Arm Driver Side
  • 2006-2009 VW Rabbit Front Lower Stamped Steel Control Arm Driver Side

This part replaces:

  • OE # 1K0 407 151 P
  • OE # 1K0 407 151 AA
  • Hollander 512-58921AL, 512-58921CL
  • Dorman 520-991
  • Hollander 512-59016AL
Part #: 1ASLF00103

How-to Video:

(09:08 min)