Control Arm with Ball Joint - 1ASFU00108

This replacement front upper control arm is just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

• RH (Passenger Side) FRONT UPPER
• Complete assembly
  • Includes ball joint and bushings
• Direct replacement
• Built to strict quality control standards
• Fits 2WD (Two Wheel Drive) Models only
• Fits models with Standard Duty Coil Suspension only

Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints with our quality replacement.

One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.