Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Location:   Rearward

These replacement front lower control arms are just what you need to bring back the safety and integrity of your vehicle's suspension and steering.


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT LOWER REARWARD
  • Include bushings
  • Direct replacements
  • Built to strict quality control standards

Worn or loose bushings or ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace those heavily rusted, rotted, or damaged control arms with the loose bushings with our high quality replacements.

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:52)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Loosening the Control Arm (1:20)
    • Secure the bottom strut nut with a 19mm wrench and loosen the 18mm bolt
    • Remove the bolt
    • Loosen the upper control arm nut
    • Loosen the 21mm nut on the lower ball joint
    • Hold the spindle in place with a bungee cord
    • Hammer out the control arm
  3. step : Removing the Sway Bar Bushings (4:23)
    • Remove the two 15mm bolts on the sway bar bushing bracket
    • Remove the brackets from the bushing
    • Remove the bushing
  4. step : Removing the Lower Control Arm (5:10)
    • Tap in a 12mm Allen socket to the upper control arm bolt
    • Rotate the nut and bolt together
    • Remove the nut and bolt
    • Pull the spindle and hub out of the way
    • Remove the control arm
  5. step : Installing the Lower Control Arm (9:52)
    • Install the control arm into the subframe of the vehicle
    • Insert the upper bolt with a 12mm allen socket without rounding off the threads
    • Hand-tighten the washer and bolt
    • Tighten the lower ball joint castle nut
    • Torque the lower ball joint nut to 50 foot-pounds and add 90 degrees
    • Insert and bend the cotter pin
  6. step : Tightening the Control Arm (13:18)
    • Pull up the hub while keeping the lower end of the strut in place
    • Start the 19mm nut in the upper control arm
    • Hold the nut and tighten the nut
    • Torque the nut to 35 foot-pounds and add 90 degrees
    • Remove the bungee cord
    • Push up on the suspension and align the strut
    • Tighten the lower strut bolt
    • Jack up underneath the spindle to simulate ride height
    • Torque the lower strut bolt to 128 foot-pounds
    • Finish tightening the upper control arm bolt on the lower control arm
    • Torque the bolt to 130 foot-pounds
  7. step : Reinstalling the Sway Bar Bushings (16:15)
    • Insert the bushing onto the way bar
    • Tighten the bracket into place
  8. step : Reattaching the Wheel (16:44)
    • Slide the wheel into place
    • Start the 21mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench
  • 12mm Allen Wrench

  • General Tools

  • Jack Stands
  • Rubber Mallet
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Safety Glasses
  • Gloves
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Wrenches - Metric

  • Complete Metric Wrench Set

5.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Will always be a customer
I have order parts from 1a auto and you cant beat their prices they are cheaper than your auto part store and delivery is always on time I will refer 1 a auto to any of my friends and any one who is looking to buy auto parts for their vehicles again I will remain a loyal customer
March 26, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Are these greasable?
Trent L November 19, 2016
Brian F November 22, 2016
Stacey P November 24, 2016
Year Make Model Description
2005-2010Chrysler 300 Chrysler 300 Front Lower Rearward Control Arm Pair Rear Wheel Drive
2008-2010Dodge Challenger Dodge Challenger Front Lower Rearward Control Arm Pair
2006Dodge Charger Dodge Charger Front Lower Rearward Control Arm Pair
2007-2010Dodge Charger Dodge Charger Front Lower Rearward Control Arm Pair Rear Wheel Drive
2005-2008Dodge Magnum Dodge Magnum Front Lower Rearward Control Arm Pair Rear Wheel Drive
Part #: 1ASFK00392

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(17:11 min)