Replaces

Chrysler PT Cruiser Window Regulator Pair - 1AWRK00844

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Quantity:   Pair
  • Operation:   Power

These replacement window regulators are just what you need to get your vehicle in good working form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT DOORS
  • Power operation
  • Includes the Power Window Motors
  • Replaces dealer part numbers: 5017810AC, 5017814AB, 5017811AC, 5017815AB
  • 100% tested prior to leaving the factory
  • Direct replacements
  • Built to strict quality control standards
  • Fit Sedan Models only
    • Do NOT fit Convertible Models

These window regulators make great replacements and have good cost savings over the dealer parts.

Please Note: These window regulators are high quality aftermarket parts that meets or exceeds the performance of the original. They have been subjected to extensive testing and quality control standards. That is why we offer these regulators with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle if this window regulator does not fit the application stated.
  • This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door panel (1:02)
    • Pull the triangular trim panel corresponding with the side mirror.
    • Remove the two 10 mm bolts in the door pull.
    • Unscrew the four Phillips screws securing the door panel.
    • Pull the door panel off.
    • Disconnect the wiring harness from the door lock switch and unclip the door latch rod.
  2. step : Remove the window regulator (2:57)
    • Unbolt the brace with your 10 mm socket and ratchet.
    • Carefully peel back the water shield.
    • Unbolt the two 10 mm bolts with your socket and ratchet to remove the window up and out of the regulator.
    • Secure your window with painters tape so it is up and out of the way.
    • Disconnect the electrical for the power window.
    • Unbolt the seven 10 mm nuts securing the power window regulator assembly.
    • Carefully finesse the assembly out of the door.
  3. step : Install your new window regulator (5:48)
    • Feed the assembly into place within the door.
    • Secure with the seven 10 mm nuts and connect the electrical lead to the window motor.
    • Carefully lower the window down into the clamps in the regulator and secure with your 10 mm socket and ratchet.
    • Replace the water shield and bolt the brace back onto the door with your 10 mm socket and ratchet.
  4. step : install your door panel (8:11)
    • Connect the power door lock switch and door latch rod.
    • Pin the door panel on.
    • Secure the door panel with the four Phillips screws and two 10 mm bolts.
    • Snap the triangular side mirror trim panel back onto the door.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
great job
delivered in a timely manner and they fit. Thanks for the follow up
March 8, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2004Chrysler PT Cruiser Chrysler PT Cruiser Front Power Window Regulator with Motor Pair
2005Chrysler PT Cruiser Chrysler PT Cruiser Sedan Front Power Window Regulator with Motor Pair
Part #: 1AWRK00844


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:02 min)