Replaces

Chrysler PT Cruiser Window Regulator Front Driver Side - 1AWRG01803

This replacement window regulator is just what you need to get your vehicle in good working form again!

Specifications:

  • LH (Driver Side) FRONT DOOR
  • Power operation
  • Includes the Power Window Motor
  • Replaces dealer part numbers: 5017811AC, 5017815AB
  • 100% tested prior to leaving the factory
  • Direct replacement
  • Built to strict quality control standards
  • Fits Sedan Models only
    • Does NOT fit Convertible Models

This window regulator makes a great replacement and has good cost savings over the dealer part.

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    •  This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it, you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the door panel (1:02)
    • Pull the triangular trim panel corresponding with the side mirror.
    • Remove the two 10 mm bolts in the door pull.
    • Unscrew the four Phillips screws securing the door panel.
    • Pull the door panel off.
    • Disconnect the wiring harness from the door lock switch and unclip the door latch rod.
  2. step : Remove the window regulator (2:57)
    • Unbolt the brace with your 10 mm socket and ratchet.
    • Carefully peel back the water shield.
    • Unbolt the two 10 mm bolts with your socket and ratchet to remove the window up and out of the regulator.
    • Secure your window with painters tape so it is up and out of the way.
    • Disconnect the electrical for the power window.
    • Unbolt the seven 10 mm nuts securing the power window regulator assembly.
    • Carefully finesse the assembly out of the door.
  3. step : Install your new window regulator (5:48)
    • Feed the assembly into place within the door.
    • Secure with the seven 10 mm nuts and connect the electrical lead to the window motor.
    • Carefully lower the window down into the clamps in the regulator and secure with your 10 mm socket and ratchet.
    • Replace the water shield and bolt the brace back onto the door with your 10 mm socket and ratchet.
  4. step : install your door panel (8:11)
    • Connect the power door lock switch and door latch rod.
    • Pin the door panel on.
    • Secure the door panel with the four Phillips screws and two 10 mm bolts.
    • Snap the triangular side mirror trim panel back onto the door.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(10:02 min)

Tools List:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket



This part replaces:

  • OE # 5017815AB
  • OE # 5017811AC
  • Hollander 125-02016L
  • Dorman 748-564
  • Partslink CH1350147
  • TYC 660342

Vehicle Fit

  • 2001-2004 Chrysler PT Cruiser Power Window Regulator with Motor Front Driver Side (High Quality)
  • 2005 Chrysler PT Cruiser Sedan Power Window Regulator with Motor Front Driver Side (High Quality)
Part #: 1AWRG01803

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More