Chrysler Aspen Dodge Durango Heater Blower Motor with Fan Cage - 1AHCX00221

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This Dodge Durango & Chrysler Aspen FRONT heater blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following


  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 5061381AA
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory
  • Fits the FRONT heater blower motor on vehicles that have front & rear unit

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Blower Motor (0:36)
    • Disconnect the blower motor wiring lead
    • Remove the three 7mm bolts from the blower motor
    • Slide the blower motor down and out
  2. step : Installing the New Blower Motor (2:28)
    • Line up the new blower motor using the triangle bracket
    • While holding the blower motor in place with one hand, start the bolts by hand
    • Tighten the three 7mm bolts
    • Reconnect the blower motor wiring lead

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 7mm Socket

5.00/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Durango heater blower motor
Great product, easy install, shipped extremely fast. Will do all business with 1a Great company. James A Kupa, Esq.
January 30, 2017
Blower fan
I will recomend The part that i order was a perfect fit Arrive on time no modifications required. 100% satisfied,thanks
September 10, 2018
Fresh air
Took about and hour Bolted in and attached wires. Fresh air again.
October 25, 2018
fan motor
easy order online, correct fit, shipment processed same day, highly recommend this site
November 16, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2007-2009Chrysler Aspen Chrysler Aspen Front Heater Blower Motor with Fan Cage
2004-2009Dodge Durango Dodge Durango Front Heater Blower Motor with Fan Cage
Part #: 1AHCX00221

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:28 min)