Replaces

Chevy Toyota Geo Front Passenger Side Lower Control Arm with Ball Joint

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Highest Quality Materials

Made from highest quality materials that meet or exceed OEM standards

Direct Fit Replacement

Direct fit replacement part guaranteed to fit and function properly for your specific application

Quality Tested

Quality tested and built to a strict level of product standards

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:24)
    • Pry off the hub cap with a pry bar
    • Loosen the lug nuts with a 21mm socket and breaker bar
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull the wheel off the hub
  2. step : Removing the Ball Joint (1:12)
    • Apply rust penetrant to the ball joint nuts and bolt
    • Loosen the two ball joint nuts with a 17mm socket and breaker bar
    • Loosen the ball joint bolt with a 17mm socket and breaker bar
    • Remove the cotter pin from the ball joint castle nut with needle nose pliers and side cutters
    • Drive the cotter pin out of the castle nut with a hammer and punch
    • Loosen the castle nut with a 19mm wrench and a dead blow hammer
    • Strike the wheel knuckle with a small sledge hammer
    • Remove the two 17mm nuts from the ball joint
    • Remove the 17mm bolt from the ball joint
    • Separate the ball joint from the control arm
    • Pry the ball joint out of the wheel knuckle with a pry bar
    • Remove the castle nut from the ball joint
    • Pull the ball joint out of the wheel knuckle
  3. step : Installing the Ball Joint (6:42)
    • Remove the cotter pin and castle nut from the new ball joint
    • Clean any grease from the wheel knuckle
    • Slide the ball joint into the wheel knuckle
    • Start the castle nut onto the ball joint by hand
    • Slide the ball joint studs into the control arm
    • Start the two 19mm nuts onto the ball joint studs by hand
    • Start the 17mm bolt into the control arm
    • Tighten the castle nut with a 19mm wrench
    • Line up the castle nut with the cotter pin hole
    • Insert the cotter pin into its hole
    • Fold over the cotter pin with pliers
    • Tighten the 17mm bolt
    • Tighten the two 19mm nuts to 55 foot-pounds of torque
  4. step : Installing the Wheel (9:32)
    • Slide the wheel onto the hub
    • Start the lug nuts with the tapered side facing the wheel
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts to 76 foot-pounds in a star pattern
    • Line up the hub cap with the valve stem
    • Push the hub cap onto the wheel
    • Pump the brake pedal until it feels firm

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Rubber Mallet
  • Sledge Hammer
  • Center Punch
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Side Cutters
  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket
  • 21mm Socket

  • Specialty Tools

  • Ball Joint Press
  • Dead Blow Hammer

  • Wrenches - Metric

  • 19mm Wrench

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
lower control arm & balljoint
We installed these parts and had the front end aligned, car drove perfectly. We received the parts on time and are well satisfied with the out come and the price was better than anyones.
November 27, 2019
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1998-2002Chevy Prizm Chevy Prizm Front Passenger Side Lower Control Arm with Ball Joint
1996-1997Geo Prizm Geo Prizm Front Passenger Side Lower Control Arm with Ball Joint
1996-2002Toyota Corolla Toyota Corolla Front Passenger Side Lower Control Arm with Ball Joint

Part Interchange

Brand Label Part Number
Beck / Arnley 101-4928
Beck / Arnley 102-4928
Beck/Arnley 102-4928
Beck/Arnley 101-4928
CARQUEST CA222
Dorman 520-418
Dorman - OE Solutions 520-418
Dorman OE Solutions 520-418
Falcon CA205
Falcon Steering Systems FCA205
General Motors 4806802021
General Motors 4806802020
General Motors 4806812250
General Motors 4806812240
General Motors 4806812220
General Motors OEM 4806802021
General Motors OEM 4806812250
General Motors OEM 4806812240
General Motors OEM 4806812220
General Motors OEM 4806802020
Ingalls Engineering CAK80335
MAS Industries CA30314
MAS Industries CA30314PR
MOOG RK80703
MOOG K80703
MOOG CK80335
MOOG K80335
MOOG K9756
MOOG K90309
MOOG RK80335
MOOG Chassis Products K80703
MOOG Chassis Products K9756
MOOG Chassis Products K80335
MOOG Chassis Products RK80703
MOOG Chassis Products RK80335
MOOG Chassis Products CK80335
MOOG Chassis Products K90309
Mcquay-Norris FA4258
Mcquay-Norris FA4271
Mevotech MS8079
Mevotech RMS8079
Mevotech CMS8079
Mevotech GS8079
NAPA 260-5399
NAPA 260-5385
NAPA Premium 2605398
NAPA Premium 2605385
Precision Driveline 5CB86018
Precision Driveline CB86018
Raybestos Chassis 507-1188
TRW JTC479
Toyota 4806812171
Toyota 4806812240
Toyota 4806812170
Toyota 4806812220
Toyota 4806812250
Toyota 4806802021
Toyota 4806812180
Toyota 4806802010
Toyota OEM 4806812171
Toyota OEM 4806812240
Toyota OEM 4806812180
Toyota OEM 4806812220
Toyota OEM 4806812170
Toyota OEM 4806802010
Toyota OEM 4806812250
Toyota OEM 4806802021

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASFK05424
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.