Replaces

Chevy Toyota Geo Front Driver Side Lower Control Arm

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

This replacement front lower control arm is just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Fits LH (Driver Side) FRONT LOWER
  • Includes Bushings
  • Direct replacement
  • Built to strict quality control standards
  • Has sway bar tab
  • Does not include ball joint

Worn or loose bushings can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace that control arm with the loose bushings with our high quality replacement.

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:24)
    • Pry off the hub cap with a pry bar
    • Loosen the lug nuts with a 21mm socket and breaker bar
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull the wheel off the hub
  2. step : Removing the Ball Joint (1:12)
    • Apply rust penetrant to the ball joint nuts and bolt
    • Loosen the two ball joint nuts with a 17mm socket and breaker bar
    • Loosen the ball joint bolt with a 17mm socket and breaker bar
    • Remove the cotter pin from the ball joint castle nut with needle nose pliers and side cutters
    • Drive the cotter pin out of the castle nut with a hammer and punch
    • Loosen the castle nut with a 19mm wrench and a dead blow hammer
    • Strike the wheel knuckle with a small sledge hammer
    • Remove the two 17mm nuts from the ball joint
    • Remove the 17mm bolt from the ball joint
    • Separate the ball joint from the control arm
    • Pry the ball joint out of the wheel knuckle with a pry bar
    • Remove the castle nut from the ball joint
    • Pull the ball joint out of the wheel knuckle
  3. step : Installing the Ball Joint (6:42)
    • Remove the cotter pin and castle nut from the new ball joint
    • Clean any grease from the wheel knuckle
    • Slide the ball joint into the wheel knuckle
    • Start the castle nut onto the ball joint by hand
    • Slide the ball joint studs into the control arm
    • Start the two 19mm nuts onto the ball joint studs by hand
    • Start the 17mm bolt into the control arm
    • Tighten the castle nut with a 19mm wrench
    • Line up the castle nut with the cotter pin hole
    • Insert the cotter pin into its hole
    • Fold over the cotter pin with pliers
    • Tighten the 17mm bolt
    • Tighten the two 19mm nuts to 55 foot-pounds of torque
  4. step : Installing the Wheel (9:32)
    • Slide the wheel onto the hub
    • Start the lug nuts with the tapered side facing the wheel
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts to 76 foot-pounds in a star pattern
    • Line up the hub cap with the valve stem
    • Push the hub cap onto the wheel
    • Pump the brake pedal until it feels firm

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Rubber Mallet
  • Sledge Hammer
  • Center Punch
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Side Cutters
  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket
  • 21mm Socket

  • Specialty Tools

  • Ball Joint Press
  • Dead Blow Hammer

  • Wrenches - Metric

  • 19mm Wrench

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Thank you for inquiring this was the first time buying auto parts online the price was awesome the part is quality and I am very satisfied with the professional service you provide look forward to doing business with your company for all my automotive needs thanks again sincerely Scott Vincent
January 25, 2017
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1998-2002Chevy Prizm Chevy Prizm Front Driver Side Lower Control Arm
1996-1997Geo Prizm Geo Prizm Front Driver Side Lower Control Arm
1996-2002Toyota Corolla Toyota Corolla Front Driver Side Lower Control Arm

Part Interchange

Brand Label Part Number
ACDelco 45D3495
Beck / Arnley 102-4927
Beck / Arnley 101-4927
Beck/Arnley 101-4927
Beck/Arnley 102-4927
CARQUEST CA224
Dorman 521-417
Dorman - OE Solutions 520-417
Dorman OE Solutions 520-417
Falcon CA206
Falcon Steering Systems FCA206
Ingalls Engineering CAK80336
MAS Industries CA30315
MAS Industries CA30315PR
MOOG CK80336
MOOG K80336
MOOG K80704
MOOG RK80704
MOOG RK80336
MOOG Chassis Products RK80704
MOOG Chassis Products K80704
MOOG Chassis Products RK80336
MOOG Chassis Products K80336
MOOG Chassis Products CK80336
Mcquay-Norris FA4271
Mcquay-Norris FA4259
Mevotech MS9637
Mevotech CMS9637
Mevotech GS9637
NAPA 260-5386
NAPA 260-5398
NAPA Premium 2605386
NAPA Premium 2605399
Precision Driveline 5CB86020
Precision Driveline CB86020
Raybestos Chassis 507-1189
Toyota 4806912171
Toyota 4806902010
Toyota 4806912170
Toyota 4806912180
Toyota OEM 4806912170
Toyota OEM 4806912180
Toyota OEM 4806912171
Toyota OEM 4806902010

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASLF00295
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.