Replaces

Chevy Pontiac Saturn Front Sway Bar Link Pair

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Quantity:   Pair

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links are. Over time the ball and socket joints can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: 20784686
  • Connects sway bar to control arm
  • Direct replacements
  • Built to strict quality control standards
  • 11.80 Inch Length
  • Not correct for models with RPO Code FE5 (Ride / Handling Suspension)

Note: Due to suspension options, we recommend measuring the original links that came on your vehicle. These links measure 11.80" from center to center stud.

Note: If your vehicle requires a match to an RPO (Regular Production Option) code, you can usually find it on your original window sticker and sometimes either on the inside of your trunk lid, spare tire cover, glove box door, or the front driver's side door shell.

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. These links make great replacements and offer good cost savings over the dealer parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (1:06)
    • Loosen the lug nut covers with a 19mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:31)
    • Hold the upper stabilizer link stud with an 18mm inch wrench
    • Apply penetrating oil to the stabilizer link nuts
    • Remove the upper nut from the stabilizer link with an 18mm socket and ratchet
    • Support the stabilizer link with a jack
    • Hold the lower stabilizer link stud with a 18mm inch wrench
    • Remove the lower nut from the stabilizer link with an 18mm socket and breaker bar
    • Pull off the stabilizer link
  3. step : Installing the New Stabilizer Link (3:48)
    • Push the new stabilizer link into place
    • Start the 19mm nuts onto the new stabilizer link
    • Tighten the 19mm nuts to between 45 - 50 foot-pounds of torque
  4. step : Reattaching the Wheel (4:12)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Sockets - Metric

  • 19mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 15mm Wrench
  • 18mm Wrench

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do I have to buy bushings for these sway bars or are they included?
Ricardo N March 17, 2019
You do not. These actually seemed to be a better design than the stock set I removed off my g6
B W March 17, 2019
The bushings will be included in this kit.
Emma F March 17, 2019
No. From the picture. They are like tie rods. Drive old out. Put new one in
Joseph S March 17, 2019

Fits the following Makes:

Year Make Model Description
2005-2010Chevy Cobalt Chevy Cobalt with 300mm Front Sway Bar Links without RPO Code FE5 (Performance Ride Handling Suspension) Front Sway Bar Link Pair
2006-2011Chevy HHR Chevy HHR with 300mm Front Sway Bar Links without RPO Code FE5 (Performance Ride Handling Suspension) Front Sway Bar Link Pair
2004-2012Chevy Malibu Chevy Malibu with 300mm Front Sway Bar Links without RPO Code FE5 (Performance Ride Handling Suspension) Front Sway Bar Link Pair
2007-2010Pontiac G5 Pontiac G5 with 300mm Front Sway Bar Links without RPO Code FE5 (Performance Ride Handling Suspension) Front Sway Bar Link Pair
2005-2010Pontiac G6 Pontiac G6 with 300mm Front Sway Bar Links Front Sway Bar Link Pair
2005-2006Pontiac Pursuit Pontiac Pursuit with 300mm Front Sway Bar Links without RPO Code FE5 (Performance Ride Handling Suspension) Front Sway Bar Link Pair
2007-2009Saturn Aura Saturn Aura with 300mm Front Sway Bar Links without RPO Code FE5 (Performance Ride Handling Suspension) Front Sway Bar Link Pair
2003-2007Saturn Ion Saturn Ion with 300mm Front Sway Bar Links Front Sway Bar Link Pair

Part Interchange

Brand Label Part Number
MOOG K80252
MOOG Chassis Products K80252

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASFK00248
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.