Replaces

Chevy Pontiac Saturn Front Driver or Passenger Side Sway Bar Link

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links are. Over time the ball and socket joints can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 15782690, 20784686, 22608427, 22670300, 22710286, 227610286, 25846008
  • Connects sway bar to control arm
  • Direct replacement
  • Built to strict quality control standards
  • 11.80 Inch Length
  • Not correct for models with RPO Code FE5 (Ride / Handling Suspension)

Note: Due to suspension options, we recommend measuring the original links that came on your vehicle. These links measure 11.80" from center to center stud.

Note: If your vehicle requires a match to an RPO (Regular Production Option) code, you can usually find it on your original window sticker and sometimes either on the inside of your trunk lid, spare tire cover, glove box door, or the front driver's side door shell.

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. This link makes a great replacement and offers good cost savings over the dealer part.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Testing the Stabilizer Link (0:32)
    • Turn the wheel by hand or with the steering wheel
    • Try to move the stabilizer link by hand
    • A clanking or rattling noise indicates a faulty stabilizer link
  2. step : Removing the Wheel (0:54)
    • Loosen the lug nut covers with a 19mm socket
    • Pull off the hub cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  3. step : Removing the Stabilizer Link (1:22)
    • Apply penetrating oil to the stabilizer link bolts
    • Attach an 18mm wrench to the top stabilizer link nut
    • Attach an 8mm wrench to the top stabilizer link stud
    • Turn the 18mm wrench to remove the nut
    • Attach an 18mm wrench to the lower stabilizer link nut
    • Attach an 8mm wrench to the lower stabilizer link stud
    • Turn the 18mm wrench to remove the nut
    • Pull out the stabilizer link
  4. step : Installing the New Stabilizer Link (4:03)
    • Put the new stabilizer link into place
    • Start the nuts onto the stabilizer link
    • Attach a 15mm wrench to the upper stabilizer link bolt
    • Tighten the nut with a 19mm socket and ratchet
    • Attach a 15mm wrench to the lwoer stabilizer link bolt
    • Tighten the nut with a 19mm wrench
    • Tighten the nuts to between 40 - 45 foot-pounds of torque
  5. step : Reattaching the Wheel (5:48)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Put on the hub cap, lining up the hole with the tire valve stem
    • Tighten the lug nut cap

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 19mm Socket

  • Wrenches - Metric

  • 19mm Wrench
  • 18mm Wrench
  • 15mm Wrench
  • 8mm Wrench

There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2005-2010Chevy Cobalt Chevy Cobalt with 300mm Front Sway Bar Links without RPO Code FE5 (Performance Ride Handling Suspension) Front Driver or Passenger Side Sway Bar Link
2006-2011Chevy HHR Chevy HHR with 300mm Front Sway Bar Links without RPO Code FE5 (Performance Ride Handling Suspension) Front Driver or Passenger Side Sway Bar Link
2004-2012Chevy Malibu Chevy Malibu with 300mm Front Sway Bar Links without RPO Code FE5 (Performance Ride Handling Suspension) Front Driver or Passenger Side Sway Bar Link
2007-2010Pontiac G5 Pontiac G5 with 300mm Front Sway Bar Links without RPO Code FE5 (Performance Ride Handling Suspension) Front Driver or Passenger Side Sway Bar Link
2005-2010Pontiac G6 Pontiac G6 with 300mm Front Sway Bar Links Front Driver or Passenger Side Sway Bar Link
2005-2006Pontiac Pursuit Pontiac Pursuit with 300mm Front Sway Bar Links without RPO Code FE5 (Performance Ride Handling Suspension) Front Driver or Passenger Side Sway Bar Link
2007-2009Saturn Aura Saturn Aura with 300mm Front Sway Bar Links without RPO Code FE5 (Performance Ride Handling Suspension) Front Driver or Passenger Side Sway Bar Link
2003-2007Saturn Ion Saturn Ion with 300mm Front Sway Bar Links Front Driver or Passenger Side Sway Bar Link

Part Interchange

Brand Label Part Number
MOOG K80252
MOOG Chassis Products K80252

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASSL00077
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.