Chevrolet Lighting Kit 4 Piece Set

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Quantity:   4 Piece Set
  • Kit Includes:
      (2) Parking Lights
      (2) Headlights

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing the Pins (1:01)
    • Open your hood, and locate the pins that hold the headlight in. Twist these pins, and remove to release the headlight from the mounting bracket.
  2. step : Disconnecting the Headlight (1:10)
    • Pull the headlight forward, and locate the low beam and high beam connectors. Disconnect them by putting your thumb into securing clasp and pulling.
    • The headlight is now free from the vehicle.
  3. step : Connecting the New Headlight: (1:32)
    • Bring your new headlight over and reconnect the low beam connector. Do the same for the high beam connectors.
  4. step : Replacing the new Headlight (1:50)
    • Slide the headlight back into the vehicle, making sure the low beam connector is pushed back into the hole so it doesn't get caught between the headlight and the mounting bracket.
    • Press everything down and lock them back into place with the pins.
  5. step : Test the New Headlight (2:23)
    • Make sure to test both low and high beams.

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will I need to adjust the headlight beam after replacing with these units.?
Dave L July 10, 2017
I ordered the units for a customer and he decided he wanted to install them himself. But he did have to adjust, because they were pointed upward. Hope this help
Bobby B July 10, 2017
I didnt have to make any adjustments.
Cameron L July 10, 2017
yes you will
John B July 10, 2017
I bought this headlamp kit and it was really easy to install,and no I did not have to adjust the beams.
Gerald B July 10, 2017
I did adjust the as the setting was not pre-set for aiming. You can either set them by using a flat wall or the old fashioned way using s dark stretch of road way adjusting them out and to the right of the center line.
Ron W July 10, 2017
Yes but if you have a garage door it is so easy. Jerry
Jerry H July 10, 2017
Yes you will need to adjust, but its really easy to get to the adjusting screws to aim
Mike S July 12, 2017
YES - MINE came the housing assembly. Remove the housing remount the new ones on your old ones. ...
Tony O July 27, 2017
Yes-the new lights were aimed too high..i used my garage door and lowered the beams to what I felt is desirable. No response from on coming traffic.
T E February 11, 2019
Yes ,you’ll have to adjust headlights. The manufacturer can not adjust headlights during assembly. Once mounted on vehicle you can make adjustments your self or take your vehicles to car dealer.
Robert B March 23, 2019
Bulbs included?
Darek L March 12, 2019
New light bulbs are not included. Occasionally, manufacturers leave test bulbs in the lights. If you receive test bulbs, replace them with your original bulbs or with new bulbs.
Emma F March 12, 2019
Do the new headlamp assemblies come with new adjusters for aiming ?
Brian B September 25, 2019
Yes, anda essy to install
O R September 25, 2019
Yes they do. I marked the light location on my garage door then replaced and aligned the lights by using a socket like tool to rotate the aiming adjusters. Real please with the lights.
George Y September 25, 2019
Thank you for the inquiry. These headlights do have adjusters on the back for aiming.
Christa R September 26, 2019
Yes, just like the oem
John D September 26, 2019

Fits the following Makes:

Year Make Model Description
1999-2002Chevrolet Silverado 1500 Chevrolet Silverado 1500 Lighting Kit 4 Piece Set
2001-2002Chevrolet Silverado 1500 HD Chevrolet Silverado 1500 HD Lighting Kit 4 Piece Set
1999-2002Chevrolet Silverado 2500 Chevrolet Silverado 2500 Lighting Kit 4 Piece Set
2001-2002Chevrolet Silverado 2500 HD Chevrolet Silverado 2500 HD Lighting Kit 4 Piece Set
2001-2002Chevrolet Silverado 3500 Chevrolet Silverado 3500 Lighting Kit 4 Piece Set
2000-2006Chevrolet Suburban 1500 Chevrolet Suburban 1500 Lighting Kit 4 Piece Set
2000-2006Chevrolet Suburban 2500 Chevrolet Suburban 2500 Lighting Kit 4 Piece Set
2000Chevrolet Tahoe Chevrolet Tahoe (without Z71 Package) Lighting Kit 4 Piece Set
2001-2006Chevrolet Tahoe Chevrolet Tahoe Lighting Kit 4 Piece Set

Part Interchange

Brand Label Part Number
Chevrolet 16526133
Chevrolet 16526134
Chevrolet 15199558
Chevrolet 15199559
DIY Solutions LHT04103
DIY Solutions LHT01315
DIY Solutions LHT01316
Partslink GM2502187
Partslink GM2520173
Partslink GM2503187
Partslink GM2521173

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ALHT00051
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: LHT04103