Replaces

Chevy Impala Monte Carlo Radiator Cooling Fan Assembly - 1ARFA00264

Our aftermarket cooling fan assemblies are some of the highest quality replacements on the market! This Radiator Cooling Fan Assembly is a complete, ready to bolt on, direct replacement part.

Specifications:

  • Dual Fan Assembly
  • Includes
    • LH (Driver Side) & RH (Passenger Side)
      • Fan blades
      • Motors
    • Fan Shroud
  • 100% Performance factory tested
  • Replaces dealer part numbers: 89018694, 89018693, 89018691, 89018696
  • Comes with proper plug(s) for trouble free installation
  • Built to strict quality control standards
  • Direct bolt on

This fan assembly makes a great replacement and has substantial cost savings over a dealer fan assembly.

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Engine Mounts (0:53)
    • Remove the four 15mm bolts from the engine mounts
    • Remove the two 13mm bolts from the engine mounts
    • Twist off the oil filler tube
    • Pull off the engine cover
    • Twist on the oil filler tube
    • Hold one engine mount bolt with a 15mm wrench
    • Remove the engine mount nut with a 15mm socket and ratchet
    • Hold the other engine mount bolt with a 15mm wrench
    • Remove the engine mount nut with a 15mm socket and ratchet
    • Pull off the engine mounts
  2. step : Removing the Radiator Fan (1:58)
    • Unclip the wiring harness from the radiator fan with a flat blade screwdriver
    • Disconnect the wiring harnesses from the radiator fan
    • Remove the two 10mm bolts from the radiator fan brackets
    • Pull off the radiator fan brackets
    • Remove the three 10mm bolts that hold the radiator fan to the radiator
    • Pull the radiator fan out, around the coolant hose
  3. step : Installing the New Radiator Fan (3:58)
    • Transfer the wiring harness clips from the old radiator fan to the new one
    • Push the new radiator fan into the engine compartment around the coolant hose
    • Put the radiator fan into place using the locating tabs
    • Insert the three 10mm bolts into the radiator fan
    • Put the fan brackets into place
    • Insert the two 10mm bolts into the fan bracket
    • Connect the wiring harnesses to the radiator fan
    • Clip the wiring harness to the fan
  4. step : Reinstalling the Engine Mounts (5:23)
    • Put the engine mounts into place
    • Insert the 15mm nuts and bolts into the engine mounts
    • Pull the engine mounts forward with a pry bar
    • Start the four 15mm bolts into the engine mounts
    • Start the two 13mm bolts into the engine mounts
    • Tighten all the engine mount bolts to between 50 to 55 foot-pounds of torque
    • Twist off the oil filler tube
    • Put on the engine cover
    • Twist on the oil filler tube

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket
  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Great service
They had exactly what I was look for and the installation video was a big help. The delivery was on time and I could track my package the whole time.
I am very satisfied with this company and i will be using it in the future.
Thank You.
January 28, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
Will this fit my 2010 3.5L chevy impala?
Isaac G on Jul 1, 2017
BEST ANSWER: Yes, according to the information you supplied, the part you���re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
Will this fit a 2008 impala SS with a 5.3 ltr engine?
Elvyn A on Sep 29, 2016
BEST ANSWER: no

How-to Video:

(07:05 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket
  • 10mm Socket



This part replaces:

  • Partslink GM3115187
  • Hollander 674-00240
  • TYC 621420

Vehicle Fit

  • 2006-2013 Chevy Impala excluding Police Package Radiator Cooling Fan Assembly V6 3.9L
  • 2006-2013 Chevy Impala Radiator Cooling Fan Assembly V6 3.5L
  • 2006-2007 Chevy Monte Carlo Radiator Cooling Fan Assembly V6 3.9L
  • 2006-2007 Chevy Monte Carlo Radiator Cooling Fan Assembly V6 3.5L
Part #: 1ARFA00264

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More