Replaces

Chevy Impala Monte Carlo Front & Rear Brake Rotor

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

Part Details

  • Wheel Lug Count:   5 Lug
  • Rear Brake Rotor Venting Type:   Solid
  • Rear Brake Rotor Diameter:   10.94 in. (278mm)

Specifications:

  • Comes as a Set of 4
  • Includes LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Fits 5 Stud Wheels
  • Direct replacements
  • Built to strict quality control standards
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:39)
    • Loosen the lug nut covers with a 19mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:03)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:15)
    • Remove the two 13mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a pry bar to push in the pistons
    • Pull the caliper aside
    • Pull the brake pads off by hand
    • Remove the brake pad slides
  4. step : Removing the Brake Rotor (2:24)
    • Remove the two 15mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Preparing the New Brake Pads and Rotors (2:58)
    • Clean the rotor with brake parts cleaner
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the brake pad slides with a wire brush
  6. step : Installing the New Brake Rotor (3:41)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the two 15mm bolts by hand
    • Tighten the 15mm bolts to 75 foot-pounds of torque
  7. step : Installing the New Brake Pads (4:21)
    • Push the brake pad slides into place
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread the two 13mm bolts by hand
    • Tighten the 13mm bolts to 30 foot-pounds
  8. step : Reattaching the Wheel (5:43)
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Fasten on the lug nut covers with a 19mm socket
  9. step : Testing the Brakes (6:20)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 13mm Socket
  • 15mm Socket

4.67/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
0
Solid fit
The transmission pan fit perfect for my police package and the brake rotors were just as good of a fit. All 4 rotors arrived together and labeling front or rear would have been nice. I would also like the option to add gaskets to bolt on parts from the same company I order parts from.
November 23, 2018
Excellent
Excellent fit
May 5, 2019
Great fit
October 2, 2019
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2006-2009Chevy Impala Chevy Impala Front & Rear Brake Rotor
2010Chevy Impala Chevy Impala without Integrated Parking Brake Front & Rear Brake Rotor
2006-2007Chevy Monte Carlo Chevy Monte Carlo Front & Rear Brake Rotor
Part 1ABFS02743
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BRA13809