Replaces

Chevy GMC Olds Isuzu Front Wheel Bearing & Hub Assembly Pair TRQ

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   Pair

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Have ABS sensors
  • Direct replacements
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

BHA50007 Axle / Spindle Nut Torque Specification

  1. step : Remove the wheel and tire (1:00)
    • Loosen your hub nut with your 35 mm socket.
    • Loosen your lug nut with your 19 mm lug wrench.
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel, remove the hub nut.
  2. step : Remove Brake Caliper (2:17)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 18 mm socket wrench to remove the caliper bolts.
    • Use a wrench to pry the caliper off.
    • Use a wire tie to help prevent stress on the caliper.
  3. step : Remove Brake Rotor (2:58)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (3:04)
    • Remove the clips for the hub harness.
    • Use a screwdriver to unclip the hub harness.
    • Unbolt the hub harness.
    • Remove the 3 bolts securing the hub using your 18mm socket and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Remove the hub, using driving tools to help work it out of the steering knuckle.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (6:45)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Put the three 18mm bolts in place and tighten the nuts to 65 ft lbs.
  6. step : Put brakes and wheel back on (6:45)
    • Refer to our other videos for more detailed instructions.
    • Remember to replace the lug nuts on in a star pattern.
    • Lug nuts tighten to 95 ft lbs
    • Hub nut is 75 ft lbs.
    • Make sure to check your brakes and steering before driving again.
    • Make sure to have the vehicle aligned.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 10mm Socket
  • 11mm Socket
  • 12mm Socket
  • 13mm Socket
  • 14mm Socket
  • 15mm Socket
  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket
  • 35mm Socket

  • Wrenches - Metric

  • 13mm Wrench
  • 18mm Wrench

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do these fit a 2003 ZR2 S10 Blazer?
BrennN S March 17, 2017
These will fit any trim package 2003 Chevy Blazer S10 with 4WD.
Alex P March 17, 2017

Fits the following Makes:

Year Make Model Description
1997Chevy Blazer Chevy Blazer All Wheel Drive Front Wheel Bearing & Hub Assembly Pair
1998-2005Chevy Blazer Chevy Blazer 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair
1998-2004Chevy S10 Pickup Chevy S10 Pickup 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair
1998-2000GMC Envoy GMC Envoy Front Wheel Bearing & Hub Assembly Pair
1997GMC Jimmy S-15 GMC Jimmy S-15 All Wheel Drive Front Wheel Bearing & Hub Assembly Pair
1998-2001GMC Jimmy S-15 GMC Jimmy S-15 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair
1998-2004GMC S-15 Sonoma GMC S-15 Sonoma 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair
1998-2000Isuzu Hombre Isuzu Hombre Front Wheel Bearing & Hub Assembly Pair
1997-2001Oldsmobile Bravada Olds Bravada Front Wheel Bearing & Hub Assembly Pair

Part Interchange

Brand Label Part Number
ACDelco FW317
ACDelco FW127
Beck / Arnley 051-6170
Beck/Arnley 051-6170
Chicago Rawhide BR930097
Drive Tech America NT513124
GMB 730-0001
General Motors 7467139
General Motors 7470608
General Motors 7470607
General Motors 12413046
General Motors 7470537
General Motors 12413045
General Motors OEM 7470537
General Motors OEM 7470608
General Motors OEM 7470607
General Motors OEM 12413046
General Motors OEM 7467139
General Motors OEM 12413045
Isuzu 8-12413-045-0
MOOG Hub Assemblies 513124
Mevotech H513124
Raybestos 713124
Raybestos Brakes 713124
SKF BAR-5130-A
SKF BR930097
Timken 513124

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASHS00003
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BHA50029