Chevy GMC Olds Isuzu Front & Rear Shock Absorber Set TRQ SBA60177

Vehicle Fit
Warranty & Shipping
How-To & Tools

Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

Direct Fit

Fits and functions correctly.  Competitors combine applications to reduce the amount of parts they carry, resulting in: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Remove wheels (1:06)
    • Start by removing the lug caps and wheel caps.
    • Use a lug wrench to remove the lugs and wheel.
    • Jack up the car and remove the wheel.
  2. step : Remove shock (2:00)
    • Spray the shock with penetrating oil.
    • Use a wrench or vice grip to remove the nut and bolt.
    • If it won't come free, use a sawzall to saw out the bolt.
    • Remove the washer and rubber gromit.
    • Remove the two bolts securing the shock at the bottom.
    • Spray with penetrating oil and remove with a 13mm wrench.
  3. step : Install new shock (5:23)
    • Put the washer, pan side up and the grommet with the small end facing up on the shock.
    • Place the shock in and bolt it up, alternating between the two evenly.
    • Final tighten with a hand tool.
    • Back at the top, put the second grommet on, small side down, pan washer pan side down.
    • Take the larger nut and tighten it up with your wrench.
    • Then place the small lock nut and tighten it up against the first nut.
    • Use a vice grip to secure the top of the shock while you do this.
  4. step : Put the wheel back on (8:23)
    • Place the wheel back on, and put the lugs on by hand.
    • Lower the vehicle and tighten the lug nuts with a hand tool using the star pattern.
    • Place the centercap and then hand tighten the lug caps.

Tools needed for replacement:

    General Tools

  • Reciprocating Saw

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 19mm Socket
  • 13mm Socket

  • Specialty Tools

  • Vise-Grips

  • Wrenches - Metric

  • 15mm Wrench
  • 13mm Wrench

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does hardware come with these?
Chris N May 4, 2016
Hardware is not required. Just unbolt the old ones and bolt the new ones in and your done
Gary H May 4, 2016
no you can reuse yours or you can saw the bolts if they are stuck. use grade 8. I had to saw off one bolt. use torque wrench to tighten
Jamie S May 5, 2016
No I reused the old bolts
Bryan M May 5, 2016
No hardware included
Brian F May 5, 2016
Im wondering if PART #: 1ASSP00257 will fit my 01 chevy zr2 blazer?
George H June 15, 2016
M A March 19, 2020
Do these fit the zr2 s10 2002? Just want to make sure.and does it come with the rubber grommets?
Trav D March 2, 2019
This is able to fit as long as you have four wheel drive. The rubber grommets are not included.
Emma F March 3, 2019
Will these shocks work with a 00 chevy blazer LT 4x4 4 dr? Ive noticed from watching your video, my suspension setup is different from that in the video. My shock is bolted near the lower ball joint.
John S April 21, 2019
Yes, according to the information you provided, this part will fit your 2000 Chevy Blazer S10 4x4. The vehicle in the video is a 2 wheel drive model, so the parts are a little different.
Tim K April 21, 2019
Will this fit my 2001 Chevy s10 zr2 extended cab? I know they come stock from the factory lifted 3 inches.
Eric P November 7, 2019
This will be able to fit as long as you have 4 wheel drive. The parts are built to the same OE specifications as the original but the parts are unable to work for vehicles with a lift kit. Please let us know if you have any further questions.
Emma F November 7, 2019

Fits the following Makes:

Year Make Model Description
1995-2005Chevy Blazer Chevy Blazer 4 Wheel Drive Front & Rear Shock Absorber Set
1983-1994Chevy Blazer S10 Chevy Blazer S10 4 Wheel Drive Front & Rear Shock Absorber Set
1983-2004Chevy S10 Pickup Chevy S10 Pickup 4 Wheel Drive Front & Rear Shock Absorber Set
1983-2001GMC Jimmy S-15 GMC Jimmy S-15 4 Wheel Drive Front & Rear Shock Absorber Set
1983-1990GMC S-15 Pickup GMC S-15 Pickup 4 Wheel Drive Front & Rear Shock Absorber Set
1991-2004GMC S-15 Sonoma GMC S-15 Sonoma 4 Wheel Drive Front & Rear Shock Absorber Set
1991GMC Syclone GMC Syclone 4 Wheel Drive Front & Rear Shock Absorber Set
1992-1993GMC Typhoon GMC Typhoon 4 Wheel Drive Front & Rear Shock Absorber Set
1998-2000Isuzu Hombre Isuzu Hombre 4 Wheel Drive Front & Rear Shock Absorber Set
1991-1994Oldsmobile Bravada Olds Bravada 4 Wheel Drive Front & Rear Shock Absorber Set
1996-2001Oldsmobile Bravada Olds Bravada 4 Wheel Drive Front & Rear Shock Absorber Set

Part Interchange

Brand Label Part Number
Gabriel G63422
Gabriel G63423
KYB 344041
KYB 344042
KYB Shocks & Struts 344041
KYB Shocks & Struts 344042
Monroe 37021
Monroe 37099
Monroe 32194
Monroe 32186
Monroe Shocks & Struts 32194
Monroe Shocks & Struts 37099
Monroe Shocks & Struts 37021
Monroe Shocks & Struts 32186

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASSP00257
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: SBA60177