Replaces

Chevy GMC Ignition Starter Switch - 1AZIS00005

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This ignition switch is just what you need to get your vehicle running again!

Specifications:

  • Electrical switch
  • Steering Column mounted
  • Replaces dealer part numbers: 26036311
  • Exact fit
  • No cutting or splicing necessary
  • Built to strict quality control standards

This item is an electrical part. These units are tested prior to shipment.

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Disconnecting the Battery (0:50)
    • Remove the negative terminal with a 5/16 or 8mm wrench
  2. step : Removing the Air Bag (1:23)
    • Pry the pins up and out from behind the steering wheel
    • Disconnect the air bag wiring harness
    • Remove the orange safety
  3. step : Removing the Steering Wheel (2:23)
    • Insert the seat belt through the steering wheel
    • Click in the steering wheel
    • Crack the 21mm bolt loose
    • Release the seat belt and remove it from the wheel
    • Finish removing the 21mm nut
    • Wiggle the wheel up and off by hitting the back sides or use a puller
  4. step : Removing the Steering Column Cover and Ignition Cylinder (4:07)
    • Remove the snap ring on the clock spring with a pair of snap ring pliers
    • Tilt the column all the way up
    • Remove the lever by pulling it out
    • Remove the two T25 Torx screws on the bottom of the cover
    • Pull the lower column down
    • Remove the two inverted Torx screws with an inverted E5 socket
    • Reinstall the tilt lever
    • Push down the column
    • Remove the lever
    • Push down the small hole in the top of the ignition cylinder with a hooked pick
    • Hold the key the key in the cylinder and press the hole to pull out the cylinder and remove the upper cover
  5. step : Removing the Lower Dash Panel (6:53)
    • Remove the four 7mm screws along the bottom near panel
    • Pop the panel and its plastic clips out
    • Pull out the e-brake release handle
    • Compress the tabs on each side of the release handle
    • Turn the e-brake and slide the cable out
  6. step : Removing the Ignition Starter Switch (8:19)
    • Remove the four 10mm bolts from the metal knee pan
    • Remove the metal knee panel
    • Release the tab and rotate the sensor from the ignition cylinder
    • Remove the two E4 inverted Torx with an E4 inverted Torx socket
    • Remove the ignition starter switch from the column
    • Unclip the harness wiring from any retainers/clips
    • Peel open the wrap around the harness to separate it
    • Remove the 7mm bolt in the middle of the ignition switch harness
    • On the side of the connector for the ignition switch, remove the 7mm screw
    • Slide the connector up and out
    • Pry the connector out of the main connector
    • Remove the switch
  7. step : Installing the Ignition Starter Switch (12:28)
    • Insert the switch and harness into place
    • Reinstall the two E4 inverted Torx screws
    • Clip in the harness to the ignition coil
    • Plug in the harness to the main connector
    • Reinstall the 7mm screws to the switch
    • Reattach the vent
  8. step : Installing the Lower Dash Panel (15:10)
    • Insert the metal dash panel into place
    • Tighten the bolts to the metal
    • Pull the e-brake cable back through the opening and twist it to lock it
    • Press the panel into place
    • Tighten the four 7mm screws along the bottom of the panel
  9. step : Installing the Steering Column Cover (16:10)
    • Reinstall the upper column cover
    • Insert the cylinder into place with the key in
    • Turn it forward and back to engage
    • Reinstall the tilt lever
    • Raise the column slowly
    • Reinstall the two E5 inverted Torx screws
    • Remove the tilt rod
    • Slide the lower column into place
    • Tighten the two T25 Torx screws
    • Reinstall the tilt lever
  10. step : Reinstalling the Steering Wheel (18:15)
    • Thread the harness through the steering wheel
    • Remove the alignment pin from the clock spring
    • Insert the wheel to the splines
    • Tighten the 21mm nut
    • Torque the nut to 29 foot-pounds
  11. step : Reinstalling the Air Bag (18:59)
    • Clip in the harness
    • Connect the harness to the air bag
    • Install the safety ball
    • Clip in the air bag and push it in
  12. step : Reconnecting the Battery (19:45)
    • Put your key in and turn it to the run position
    • Connect the negative terminal with an 8mm wrench

Tools needed for replacement:

    General Tools

  • Pick

  • Materials, Fluids, and Supplies

  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Snap Ring Pliers
  • Side Cutters

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 7mm Socket

  • Star Drivers & Sockets

  • E5 Socket
  • T25 Driver

4.90/ 5.0
41 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
40
0
0
0
1
5 star
Was a life saver to get this for the price it worked and fit just right no problems switched it out with a 1a auto Video off of YouTube
February 19, 2017
Fantastic price!
I checked several local and online shops for this part and no one beat the price of 1AAuto, not to mention free shipping! Product received as expected, no trouble installing, works like a charm!
March 7, 2017
Well made
Fit perfectly. The switch is very well made.The video was great. The step by step instructions in the video simplified the installation.
July 1, 2017
The Berries
This part was the berries! It was what I needed to make it go. I got it very fast. 1A Auto shipped the same day and I got it in 2 more. Thats called kickin it up here. I did all of the installation I could, but I had to get my son to make the under dash connection for me. Im too fat to get into some places. This part, and a couple more, made it all work again. Not to forget...The price was lower than ANYONE ELSE! Thank You, RnJ Clark
July 8, 2017
Ignition Starter Switch for 95 suburban
Great so far...fast shipping and easy to install. Fit was perfect. Pricing was way better than local companies who would of ordered the part for me. I highly recommend 1aauto.
July 25, 2017
Lowest price I could find!
Seems to be high quality. Went in just like the original. Still working. I am happy.
August 26, 2017
Sir
I sent it back to you guys for a refund because it’s not the right part
December 6, 2017
Accurate replacement for 96 Suburban
The harness colors dont exactly match, but the unit attaches perfectly and installs easier then the online videos show. It works great and I am happy with the product and how quickly it shipped.
January 7, 2018
Speedo + Shifting Working Again
My speedo was wacky at times (100mph standing still) truck would stay stuck driving in 3rsd gear, shift indicator light would go out. - - - all because this switch went bad. This replacement went right in, fits perfect & works perfect, & at a much better price!! It takes a bit of work & time to swap out, works great now!!
January 20, 2018
Awesome
I was impressed across the board with their customer service, prices and prompt delivery . And would you believe it was actually the right part that I ordered so I think theyre great thank you very much .
January 30, 2018
excellent product
went in effortlessly and worked perfect.no issues with this product.
February 9, 2018
Happy Camper
I received the new cable Saturday much sooner than expected and much appreciated as it allowed me to install it Sunday afternoon. The installation video in conjunction with the price was the two primary reasons I purchased from 1A. The installation went just as described except that it was not necessary to remove the steering wheel. I believe the old switch was intermittent, so I havent had enough opportunity to determine if the switch solved my problem. The cable matched perfectly.
February 19, 2018
Fixed
This part, with some other electrical parts, fixed my issues. My truck has been in the family for over 20 years. I will continue using 1AAuto for future repairs.
February 24, 2018
Ignition switch for 95 yukon
Worked great, and the video that 1 Aauto put on YouTube made the installation easy.
April 18, 2018
Ignition switch
Great part. Just need to add the e4 deep well socket to make the part/service a one stop repair.
May 18, 2018
Perfect Match and great savings
This part was a perfect match and at a third of the cost from local auto stores. The videos provided are quite helpful also.
June 27, 2018
Man, everything snapped right together nice. Clean install. The removal and install videos were really helpful. I had a no start condition with frozen guages, and when it would run, it would cut out when lowering the tilt wheel. Bang! Problem solved. Everything up and running great! Price was right too.....
October 18, 2018
Worked Perfectly!
If your trucks tachometer and speedometer and selector Indicator light are not functional plus your transmission is in limp mode this is what you need. 1/3 of the price my local auto parts store wanted. Thank You A1auto.
October 23, 2018
Transmission and gauges fail
Fast shipping and exact fit good quality product installation wasnt bad at all video help a lot on install.i recommend it works very well
November 18, 2018
This was the quickest shipping I have received the part was exactly what I needed and it worked exceptionally well
November 22, 2018
A-1 PERFECT
A-1 PERFECT SUPER FAST SHIPPING !!!!!!!!!!!!!!!! THANKS DEH.
December 13, 2018
1996 Tahoe
This ignition switch fit perfectly and was priced very good. And install video was really helpful.
January 3, 2019
95 Chevrolet K1500 4x4 Switch fits just fine
We love our mechanic for jobs we cant do ourselves, but we love the excellent 1A Auto "how to" videos. This ignition switch was affordable, was easy to install and works perfectly.
January 6, 2019
RIGHT PART FOR RIGHT PRICE!
Part was exactly as ordered. Fit perfectly. Cannot beat the price. Would definitely recommend.
January 16, 2019
Starter switch
Switch was exact as original. Installed it and it fixed all my issues of lights going off and on in the dash, heater,4x4 mode etc. Been in now for over a month and absolutely no issues. GMC dealership wanted $400.00 for switch.
January 31, 2019
Very well made exact fit.
I am very Happy with my overall help and purchase of this ignition switch/harness. I would recommend ??% not only do you get a great replacement part and help to get the correct one.but you also get a video to show/confirm how to install. Thanks 1a auto.!!
February 15, 2019
Awesome product
Part was exactly as described and worked perfectly. Also thanks for the great instructional video. It made installation a piece of cake!
March 12, 2019
Installed easy. Was easy to find and order online.
March 13, 2019
96 chevy pu
part worked great!
March 27, 2019
ignition switfh for 1996 silverado
The product worked perfectly and was exactly what 1 Auto said about it. It was delivered fast and the price was great. These folks deserve a 5 star plus.
May 3, 2019
Didnt really need it it was something else but safe it for the future just in case
June 9, 2019
Good stuff
Part fit like a glove. Service and shipping were both on spot.
June 16, 2019
Great
Good price fast deo
June 23, 2019
Made good and worked perfect for my 1995 GMC Sierra... thank you!
July 11, 2019
Plug and play!
Just like they say! Opened the part which arrived a day early and plugged right in! Exact match and well 100.00 cheaper than my local parts place! Thank you....will order here again! Didnt have to replace a transmission!
July 13, 2019
Ignition starter switch
Great product, great price and service!
July 18, 2019
Works great!
Went looking around at Auto parts stores and this part was crazy expensive and I wasnt even sure if it would fix my problem so I did some searching on the internet and found 1A Auto. The part was very fairly priced and they even have install instructions on YouTube. Ive had it Installed for a few weeks now with no problems. Thanks 1A Auto.
July 21, 2019
Great product
I would recommend this product comes in quick and is the cheapest place I found the part.
August 5, 2019
Awesome A+auto parts
Outstanding business they stand for exactly what they say intend on doing much more business with them five star rakin ratting!! Thanks for your hospitality
September 3, 2019
Easy and fast delivery
The part worked as advertised. The website was east to use.. great service
October 21, 2019
Great product
Works as directed. Direct fit
October 22, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this switch come with a new key?
Jordan H October 18, 2016
No, I still used my old key to turn the vehicle over
Gregg C October 18, 2016
This is just the actual ignition switch. If youre needing the keyed part as well thats usually called the ignition lock cylinder.
Frank P October 18, 2016
No it does not
Zeb S October 18, 2016
Key not needed
Brian F October 18, 2016
No....it sit under where your key at.
Willie F October 18, 2016
no it is not the key switch, it is the ignition switch that attaches to the key switch
Tad J October 28, 2016
No
Joshua M February 20, 2017
No, this switch does not have a key.
ANTHONY C F August 26, 2017
U have to use the cars key tumbler
Joe L September 30, 2017
No this install below the actual key switch
T R January 8, 2018
The symptoms are: Speedometer and tachometer operate intermittently, and their malfunction coincides with the intermittent function of the automatic transmission. In other words, when the gauges fail, the transmission stays in “drive� (high) and does not start out in low then upshift. When the gauges work, so does the transmission. The problem seems to be electrical. Is the ignition switch suspect?
Randy B January 4, 2017
From the sounds of your issues, it appears that the issue would be more related to a vehicle speed sensor, or another piece of the electrical system. We do recommend having the vehicle diagnosed as there could be a fault towards the instrument cluster itself or the parts related.
Alex P January 4, 2017
Will the 96 chevy k1500 ignition switch fit in a 98 k1500? Vehicle isnt starting and looking to do it myself cheap.
Sean W March 2, 2017
This will not mount on your 1998 model K1500. There are wiring differences, or connection differences.
Alex P March 2, 2017
Will the 96 k1500 fit a 97 k1500 (AZIS00005) and if not do you carry the one I need?
Anthony P April 4, 2018
This part is not listed to fit your vehicle. We may have a part that is listed to fit! Please search our site using your vehicle info and then choose the appropriate category. All the parts we carry are guaranteed to fit the vehicle they are listed for. Thank you!
Peter L April 4, 2018
Does this product come with keys?
Chris M April 7, 2018
has no place for a key so, no
S K April 7, 2018
no, just the switch, connector, and wires
Lonny R April 7, 2018
No, this wiring harness is an internal piece inside the steering column. Was getting weird intermittent error, loss of speedo, tach and erratic shift. Replacing fixed all.
P V April 7, 2018
No. If you just replace this switch, your key will still work unless you also replace the ignition lock cylinder. If you buy a new ignition lock cylinder it comes with new keys.
E L April 8, 2018
No
R O December 31, 2018
Why did you remove the snap ring from steering wheel shaft and then not put it back on after repair?
Chris L February 16, 2019
For the same reason we were cautioned not to use an odd eight inch long 8mm wrench to short the battery, the seatbelt was put through the steering wheel, the steering wheel was attempted to be wiggled and hit from the back before using a puller, there was a hair tie hanging on the gear selector... Do you see the picture?
Chris B February 16, 2019
Put it back on
Mark B February 16, 2019
All mounting hardware that was removed during the disassembly of the steering column would be put back on during the installation the new part.
Chris C February 19, 2019
Year Make Model Description
1995Chevy Blazer Chevy Blazer with 1st Design Ignition Starter Switch
1995-1996Chevy C1500 Truck Chevy C1500 Truck with 1st Design Ignition Starter Switch
1995-1996Chevy C2500 Truck Chevy C2500 Truck with 1st Design Ignition Starter Switch
1995-1996Chevy C3500 Truck Chevy C3500 Truck with 1st Design Ignition Starter Switch
1995-1996Chevy K1500 Truck Chevy K1500 Truck with 1st Design Ignition Starter Switch
1995-1996Chevy K2500 Truck Chevy K2500 Truck with 1st Design Ignition Starter Switch
1995-1996Chevy K3500 Truck Chevy K3500 Truck with 1st Design Ignition Starter Switch
1995Chevy S10 Pickup Chevy S10 Pickup with 1st Design Ignition Starter Switch
1995-1996Chevy Suburban C1500 Chevy Suburban C1500 with 1st Design Ignition Starter Switch
1995-1996Chevy Suburban C2500 Chevy Suburban C2500 with 1st Design Ignition Starter Switch
1995-1996Chevy Suburban K1500 Chevy Suburban K1500 with 1st Design Ignition Starter Switch
1995-1996Chevy Suburban K2500 Chevy Suburban K2500 with 1st Design Ignition Starter Switch
1995-1996Chevy Tahoe Chevy Tahoe with 1st Design Ignition Starter Switch
1995-1996GMC C1500 Truck GMC C1500 Truck with 1st Design Ignition Starter Switch
1995-1996GMC C2500 Truck GMC C2500 Truck with 1st Design Ignition Starter Switch
1995-1996GMC C3500 Truck GMC C3500 Truck with 1st Design Ignition Starter Switch
1995GMC Jimmy S-15 GMC Jimmy S-15 with 1st Design Ignition Starter Switch
1995-1996GMC K1500 Truck GMC K1500 Truck with 1st Design Ignition Starter Switch
1995-1996GMC K2500 Truck GMC K2500 Truck with 1st Design Ignition Starter Switch
1995-1996GMC K3500 Truck GMC K3500 Truck with 1st Design Ignition Starter Switch
1995GMC S-15 Sonoma GMC S-15 Sonoma with 1st Design Ignition Starter Switch
1995-1996GMC Suburban C1500 GMC Suburban C1500 with 1st Design Ignition Starter Switch
1995-1996GMC Suburban C2500 GMC Suburban C2500 with 1st Design Ignition Starter Switch
1995-1996GMC Suburban K1500 GMC Suburban K1500 with 1st Design Ignition Starter Switch
1995-1996GMC Suburban K2500 GMC Suburban K2500 with 1st Design Ignition Starter Switch
1995-1996GMC Yukon GMC Yukon with 1st Design Ignition Starter Switch
Part 1AZIS00005
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.