Replaces

Chevrolet GMC Hummer Front Wheel Bearing & Hub Assembly TRQ

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Tapered Roller Bearing

Specifications:

  • Fits LH (Driver Side) or RH (Passenger Side) Front
  • 4 bolt flange
  • Includes ABS sensor and plug wire
  • Fits 8 Lug Wheel
  • Studs already installed
  • Direct replacement
  • Built to strict quality control standards

What are Tapered Bearings and Why Use Them?

Tapered bearings are better than roller ball bearings at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars. 

Roller ball bearings have spherical ball bearings between two straight rings (called races). Tapered bearings use tapered rollers shaped like flat-topped cones and two races angled from the outside to the inside of the bearing. The greater the angle, the more axial load the bearing can handle.

Your model came from the factory with tapered bearings. This type of bearing handles cornering forces better for trucks and large cars. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing will result in increased wear and faster failure.

 

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

BHA50000 Torque Spec

  1. step : Removing the Wheel (0:52)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Caliper Bracket (1:17)
    • Remove the T55 Torx bolts from the caliper
    • Use either a C-clamp to squeeze the caliper to push the caliper piston in
    • Remove the caliper
    • Pry the brake pads off with a flat blade screwdriver
    • Use a piece of pipe and ratchet to remove two 18mm bolts from the caliper bracket
    • Slide the rotor off
  3. For the third step, if you do not have air tools you can either loosen the center hub nut before you take your brakes apart by having somebody hold the brakes, or you can use a large bar, put it between the lug studs to hold it, and break the bar.

  4. step : Removing the Hub (2:58)
    • Disconnect the ABS harness from the frame and steering spindle by removing the clips
    • Pry off the center hub cap using a flat blade screw driver and hammer
    • Remove the center hub nut with an impact wrench and air blow gun
    • Remove the three 15mm hub bolts with two 15mm wrenches
    • Twist the hub nut a quarter of the way
    • And hammer from the back of the hub
    • Remove the hub nut and pull the hub out
  5. step : Installing the New Hub (5:06)
    • Place the backing plate onto the hub
    • Push the hub back into place
    • Insert and tighten the 15mm hub bolts
    • Torque the 15mm hub bolts to 75 ft/lbs
    • Remove the clip and feed the ABS harness back into place
    • Replace the clips and brackets to the ABS harness
    • Replace center hub nut and washer
    • Tighten the center hub nut
  6. step : Replacing the Caliper Bracket (6:46)
    • Place the rotor on the hub
    • Twist a lug nut to hold the rotor in place
    • Put the caliper on
    • Replace and tighten the 18mm bolts
    • Torque the 18mm bolts to 75 ft/lbs
    • Install the new brake pads into the bracket, tapping lightly with a hammer
    • Grease the caliper bolts
    • Place the caliper onto the bracket
    • Replace and tighten the T55 Torx bolts
    • Torque the bolts to 30 ft/lbs
  7. step : Reinstalling the Wheel (8:46)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the 22mm bolts
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Torque the center hub nut to a 125 ft/lbs
    • Reattach the center cap
  8. step : Testing the Brakes (9:33)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Hex Wrenches

  • 5mm Hex Wrench

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 22mm Socket
  • 35mm Socket

  • Star Drivers & Sockets

  • T55 Torx Socket

  • Wrenches - Metric

  • 15mm Wrench

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will this fit a 2002 silverado 2500 2wd?
Steve T December 20, 2016
Yes, this will be a direct fit replacement hub and bearing assembly for your 2002 Chevy Silverado 2500 with 2WD.
Alex P December 20, 2016
Where are these bearing hubs manufactured?
Emory F March 22, 2017
These are made in either China, Taiwan, or Japan.
Alex P March 23, 2017
Does this fit 4 wheel drive?
Travis K April 29, 2017
Depending on the vehicle it will fit either two or four wheel drive. Please refer to our fit list located on the parts page.
Tim K May 1, 2017
Will this fit a 2006 Silverado 1500 HD 4wd?
Chris M May 6, 2017
Yes, according to the information you supplied, the part you’re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
Tim K May 8, 2017
What is the flat rate time?
Ken S September 29, 2019
The time should be about 30 minutes to a hour. Please let us know if you have any further questions.
Emma F September 29, 2019
I have a 2005 Chevy K1500 4X4 LT. I want the heavier duty hubs. WIll these work or are they for HD trucks?
Alicia B January 5, 2020
I have used these on 3 different trucks. All are 5 wheel drive and I have not had a problem. Two of them were Chevy 2500 HDs. A 2001 and a 2003.
Ronald S January 6, 2020
Thank you for the inquiry. Yes, according to the information you provided, this part will fit your 2005 Chevy Silverado 1500 HD model with 4wd. Please let us know if you have any other questions!
Christa R January 6, 2020
They worked fine on my 2001 2500 Duramax.
James C January 20, 2020
Does it matter if you have a push button 4wd?
Martyn S March 13, 2020
This will not affect the fitment for these parts. Thank you for the inquiry!
Andra M March 13, 2020
I dont think so. Mine is electric pushbutton, and it worked fine.Enter
James C March 13, 2020

Fits the following Makes:

Year Make Model Description
2002-2006Chevrolet Avalanche 2500 Chevy Avalanche 2500 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2002-2003Chevrolet Avalanche 2500 Chevy Avalanche 2500 Rear Wheel Drive Front Wheel Bearing & Hub Assembly
2001-2003Chevrolet Silverado 1500 HD Chevy Silverado 1500 HD 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2001-2003Chevrolet Silverado 1500 HD Chevy Silverado 1500 HD Rear Wheel Drive Front Wheel Bearing & Hub Assembly
2005-2006Chevrolet Silverado 1500 HD Chevy Silverado 1500 HD 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2005-2006Chevrolet Silverado 1500 HD Chevy Silverado 1500 HD Rear Wheel Drive Front Wheel Bearing & Hub Assembly
2007Chevrolet Silverado 1500 HD Classic Chevy Silverado 1500 HD Classic 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2007Chevrolet Silverado 1500 HD Classic Chevy Silverado 1500 HD Classic Rear Wheel Drive Front Wheel Bearing & Hub Assembly
1999-2004Chevrolet Silverado 2500 Chevy Silverado 2500 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2001-2004Chevrolet Silverado 2500 Chevy Silverado 2500 Rear Wheel Drive Front Wheel Bearing & Hub Assembly
2001-2006Chevrolet Silverado 2500 HD Chevy Silverado 2500 HD 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2001-2006Chevrolet Silverado 2500 HD Chevy Silverado 2500 HD Rear Wheel Drive Front Wheel Bearing & Hub Assembly
2007Chevrolet Silverado 2500 HD Classic Chevy Silverado 2500 HD Classic 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2007Chevrolet Silverado 2500 HD Classic Chevy Silverado 2500 HD Classic 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2001-2006Chevrolet Silverado 3500 Chevy Silverado 3500 4 Wheel Drive with RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly
2004-2006Chevrolet Silverado 3500 Chevy Silverado 3500 4 Wheel Drive with Dual Rear Wheels (DRW) Front Wheel Bearing & Hub Assembly
2007Chevrolet Silverado 3500 Classic Chevy Silverado 3500 Classic 4 Wheel Drive with RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly
2007Chevrolet Silverado 3500 Classic Chevy Silverado 3500 Classic 4 Wheel Drive with Dual Rear Wheels (DRW) Front Wheel Bearing & Hub Assembly
2000-2006Chevrolet Suburban 2500 Chevy Suburban 2500 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2001-2006Chevrolet Suburban 2500 Chevy Suburban 2500 Rear Wheel Drive Front Wheel Bearing & Hub Assembly
2001-2003GMC Sierra 1500 HD GMC Sierra 1500 HD 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2001-2003GMC Sierra 1500 HD GMC Sierra 1500 HD Rear Wheel Drive Front Wheel Bearing & Hub Assembly
2005-2006GMC Sierra 1500 HD GMC Sierra 1500 HD 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2005-2006GMC Sierra 1500 HD GMC Sierra 1500 HD Rear Wheel Drive Front Wheel Bearing & Hub Assembly
2007GMC Sierra 1500 HD Classic GMC Sierra 1500 HD Classic 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2007GMC Sierra 1500 HD Classic GMC Sierra 1500 HD Classic Rear Wheel Drive Front Wheel Bearing & Hub Assembly
1999-2004GMC Sierra 2500 GMC Sierra 2500 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2001-2004GMC Sierra 2500 GMC Sierra 2500 Rear Wheel Drive Front Wheel Bearing & Hub Assembly
2001-2006GMC Sierra 2500 HD GMC Sierra 2500 HD 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2001-2006GMC Sierra 2500 HD GMC Sierra 2500 HD Rear Wheel Drive Front Wheel Bearing & Hub Assembly
2007GMC Sierra 2500 HD Classic GMC Sierra 2500 HD Classic 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2001-2006GMC Sierra 3500 GMC Sierra 3500 4 Wheel Drive with RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly
2004-2006GMC Sierra 3500 GMC Sierra 3500 4 Wheel Drive with Dual Rear Wheels (DRW) Front Wheel Bearing & Hub Assembly
2007GMC Sierra 3500 Classic GMC Sierra 3500 Classic 4 Wheel Drive with RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly
2007GMC Sierra 3500 Classic GMC Sierra 3500 Classic 4 Wheel Drive with Dual Rear Wheels (DRW) Front Wheel Bearing & Hub Assembly
2000-2006GMC Yukon XL 2500 GMC Yukon XL 2500 4 Wheel Drive Front Wheel Bearing & Hub Assembly
2001-2006GMC Yukon XL 2500 GMC Yukon XL 2500 Rear Wheel Drive Front Wheel Bearing & Hub Assembly
2003-2007Hummer H2 Hummer H2 4 Wheel Drive Front Wheel Bearing & Hub Assembly

Part Interchange

Brand Label Part Number
ACDelco FW166
ACDelco FW158
Chicago Rawhide BR930416
Drive Tech America NT515058
GMB 730-0231
General Motors 15719015
General Motors 89059059
General Motors 15104582
General Motors 15112411
General Motors 15042868
General Motors 15225770
General Motors OEM 15112411
General Motors OEM 15719015
General Motors OEM 15042868
General Motors OEM 15225770
General Motors OEM 89059059
General Motors OEM 15104582
MOOG Hub Assemblies 515058
Mevotech H515058
Raybestos 715058
Raybestos Brakes 715058
SKF BTD-5121
SKF BR930416
Timken SP580304

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASHF00063
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BHA48298