Replaces

Chevrolet GMC Cadillac Liftgate Release Switch ACDelco D1499F

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Specifications:
  • Brand New AC Delco Liftgate Release Switch
  • Direct replacement
  • Built to strict quality control standards

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Lift Gate Panel (0:29)
    • Open the lift gate
    • Turn off the automatic lift gate switch inside the cabin
    • Remove the T30 bolt from the lift gate handle
    • Pry out the lift gate panels with a trim tool
    • Open the rear glass
    • Remove the two pushpins from the back side of the lift gate panel
    • Pull the panel off the lift gate
    • Disconnect the electrical connector from the lift gate close switch
  2. step : Removing the Lift Gate Handle (3:27)
    • Remove the four 10mm nuts from the lift gate handle
    • Disconnect the electrical connector from the lift gate handle
    • Push the grommets out of the lift gate handle
    • Release the lift gate handle clips
  3. step : Removing the Lift Gate Open Switch from the Handle (5:01)
    • Remove the four T20 bolts from the back of the handle
    • Pull the bracket off the back of the handle
    • Pull the lift gate open switch out of the handle
    • Thread the wire out of the handle
  4. step : Installing the Switch (6:31)
    • Thread the wire into the handle
    • Line up the open switch on the handle
    • Line up the bracket on the switch
    • Fasten the four T20 bolts into the handle
  5. step : Installing the Handle (8:05)
    • Feed the wire into the lift gate
    • Fasten the four 10mm nuts onto the back of the handle
    • Connect the electrical connector for the switch
  6. step : Installing the Lift Gate Trim (9:14)
    • Slide the lift gate panel into place
    • Connect the electrical connector to the lift gate close switch
    • Push the plastic rivets into the back side of the lift gate trim
    • Close the lift gate glass
    • Push in the lift gate panel clips
    • Fasten the T30 bolt into the lift gate handle
    • Turn on the automatic lift gate switch inside the cabin
    • Test closing and opening the lift gate with the two switches

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

  • Star Drivers & Sockets

  • T30 Bit
  • T20 Driver

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2007-2014Cadillac Escalade Cadillac Escalade Liftgate Release Switch
2007-2014Cadillac Escalade ESV Cadillac Escalade ESV Liftgate Release Switch
2007-2014Chevrolet Suburban 1500 Chevy Suburban 1500 Liftgate Release Switch
2007-2013Chevrolet Suburban 2500 Chevy Suburban 2500 Liftgate Release Switch
2007-2014Chevrolet Tahoe Chevy Tahoe Liftgate Release Switch
2007-2014GMC Yukon GMC Yukon Liftgate Release Switch
2007-2014GMC Yukon XL 1500 GMC Yukon XL 1500 Liftgate Release Switch
2007-2013GMC Yukon XL 2500 GMC Yukon XL 2500 Liftgate Release Switch

Part Interchange

Brand Label Part Number
DIY Solutions BSS00964

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part ACZTM00004
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

AC DELCO
Brand #: D1499F