Replaces

Chevrolet GMC Cadillac Front Driver or Passenger Side Wheel Bearing & Hub Assembly Timken SP500301

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

TIMKEN WHEEL BEARING & HUB ASSEMBLY: SP500301

This replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Brand New Timken Wheel Bearing & Hub Assembly
  • Fits either the LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 25918329, 10393171, 15229012
  • Direct replacement
  • 3 Bolt Triangular Flange
  • Fits 6 Lug Wheel
  • New wheel studs already installed
  • ABS (Anti-Lock Brakes) Sensor is included
  • Fits 4WD (4 Wheel Drive) New Body Style Models only

Note: For 2007 truck models, the Classic Style has a crease down the center of the door skin where on the new body styles, the door skin is smooth. This hub is for the New Body Style Models.

Note: If your vehicle requires a match to an RPO (Regular Production Option) code, you can usually find it on your original window sticker and sometimes either on the inside of your trunk lid, spare tire cover, glove box door, or the front driver's side door shell.

Note:
These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (1:05)
    • Pry off the center cap with a flat blade screwdriver
    • Remove the hub nut cover with a hammer and chisel
    • Remove the hub nut with a 36mm socket and a breaker bar or a ratchet with pipe for leverage
    • Make sure the axle moves freely
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (2:05)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Caliper and Pads (2:29)
    • Remove the two 19mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  4. step : Removing the Brake Caliper Bracket and Rotor (3:22)
    • Remove the two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the T30 Torx screw from the brake rotor
    • Pull the rotor off by hand
    • If the rotor will not come off by hand, apply penetrating oil to the studs
    • Tighten M10 bolts into the rotor to press it off
  5. step : Removing the Hub (4:35)
    • Apply penetrating oil to the hub bolts
    • Remove two of the three 15mm bolts from the hub mount
    • Loosen the third 15mm bolt
    • Use a hammer to loosen up the hub
    • Disconnect the ABS sensor wiring harness near the chassis
    • Remove the third 13mm bolt
    • Pull off the hub and backing plate
    • Disconnect the ABS sensor wiring harness at the hub
  6. step : Installing the New Hub (6:44)
    • Clean the steering knuckle with a wire brush
    • Apply white grease to the hub flange
    • Push the hub through the backing plate and on to the steering knuckle
    • Start the three 15mm bolts by hand
    • Tighten the 15mm bolts to 133 foot-pounds of torque
    • Route and reconnect the abs sensor wire at both ends
  7. step : Reinstalling the Brake Caliper Bracket and Rotor (8:25)
    • Slide the rotor into place
    • Thread one lug nut to hold the rotor in place
    • Put the brake caliper bracket into place
    • Start the 18mm bolts by hand
    • Tighten the 18mm bolts to 100 foot-pounds
  8. step : Reinstalling the Brake Caliper and Pads (9:06)
    • Apply white grease to the brake pads
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 50 foot-pounds
    • Remove the placeholder lug nut
  9. step : Reattaching the Wheel (11:00)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Put on the hub nut
    • Tighten the hub nut to 156 foot-pounds
    • Tighten the lug nuts to between 100-110 foot-pounds in a crossing or star pattern
    • Reattach the center cap, inserting the tongue into the wheel groove
  10. step : Testing the Brakes (11:36)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Chisel
  • Floor Jack
  • Hammer
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • M10 x 7cm bolts
  • Mineral Spirits
  • Rust Penetrant
  • White Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 36mm Socket

  • Star Drivers & Sockets

  • T30 Driver

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
In your video, you say to torque the axle nut to 156 ft-lbs. Timkens web sight says to torque it to 188 ft-lbs. To what tightness should this brand be torqued to?
John E June 8, 2018
It will depend on application. If you can provide the full year, make and model, and verify it is 4WD/AWD we can find out what torque spec is needed for your application.
Tim K June 10, 2018
For your application it will be 188 ft-lb!
Tim K June 17, 2018
Have a 2013 1500 GMC Sierra SLE 4 x 4 with rear drum brakes, disk front brakes..What is the torque for the front hub nut on the Timken or TRQ hubs?
Rudy R May 23, 2020
The 1500s have 3 bolts that mount the hub assembly to the steering knuckle, other models have 4. Those bolts are tightened to 133 Ft-lbs. The Main axel nut that secures the hub to the CV axle is tightened to 177 Ft-lbs.
Kevin K May 23, 2020
Thanks for your inquiry. Written and video installation instructions are found on the product page under the "How-To & Tools" tab. Were constantly adding new installation video instructions. If we do not have one for your vehicle on the product listing page, please check again at a later time or check our Video Library to see similar repairs here: https://www.1aauto.com/videos
Jessica D May 24, 2020

Fits the following Makes:

Year Make Model Description
2007-2014Cadillac Escalade Cadillac Escalade 4 Wheel Drive Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2007-2014Cadillac Escalade ESV Cadillac Escalade ESV 4 Wheel Drive Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2007-2013Cadillac Escalade EXT Cadillac Escalade EXT 4 Wheel Drive Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2007-2013Chevrolet Avalanche Chevrolet Avalanche 4 Wheel Drive Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2007Chevrolet Silverado 1500 Chevrolet Silverado 1500 New Body Style 4 Wheel Drive Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2008-2013Chevrolet Silverado 1500 Chevrolet Silverado 1500 4 Wheel Drive Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2009-2013Chevrolet Silverado 1500 Chevrolet Silverado 1500 Rear Wheel Drive with RPO Code J92 (4 Wheel Disc Brakes & ABS) Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2007-2014Chevrolet Suburban 1500 Chevrolet Suburban 1500 4 Wheel Drive Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2007-2014Chevrolet Tahoe Chevrolet Tahoe 4 Wheel Drive Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2010-2014Chevrolet Tahoe Chevrolet Tahoe Rear Wheel Drive with RPO Code PPV (Police Package Vehicle) Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2007GMC Sierra 1500 GMC Sierra 1500 New Body Style 4 Wheel Drive Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2008-2013GMC Sierra 1500 GMC Sierra 1500 4 Wheel Drive Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2009-2013GMC Sierra 1500 GMC Sierra 1500 Rear Wheel Drive with RPO Code J92 (4 Wheel Disc Brakes & ABS) Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2007-2014GMC Yukon GMC Yukon 4 Wheel Drive Front Driver or Passenger Side Wheel Bearing & Hub Assembly
2007-2014GMC Yukon XL 1500 GMC Yukon XL 1500 4 Wheel Drive Front Driver or Passenger Side Wheel Bearing & Hub Assembly

Part Interchange

Brand Label Part Number
DIY Solutions HUB01201

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Only 3 left in stock
Part TKSHF00073
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Timken
Brand #: SP500301