Replaces

Chevrolet GMC Cadillac Front Driver or Passenger Side CV Axle Shaft 2 Piece Set TRQ

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Includes:   Hub Assembly
  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Tapered Roller Bearing
  • Quantity:   2 Piece Set

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

Note: This is correct for models with or without ABS brakes.  The tone ring can be removed if the original CV axle did not have one and the vehicle did not originally come equipped with ABS brakes.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:52)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Caliper Bracket (1:17)
    • Remove the T55 Torx bolts from the caliper
    • Use either a C-clamp to squeeze the caliper to push the caliper piston in
    • Remove the caliper
    • Pry the brake pads off with a flat blade screwdriver
    • Use a piece of pipe and ratchet to remove two 18mm bolts from the caliper bracket
    • Slide the rotor off
  3. For the third step, if you do not have air tools you can either loosen the center hub nut before you take your brakes apart by having somebody hold the brakes, or you can use a large bar, put it between the lug studs to hold it, and break the bar.

  4. step : Removing the Hub (2:58)
    • Disconnect the ABS harness from the frame and steering spindle by removing the clips
    • Pry off the center hub cap using a flat blade screw driver and hammer
    • Remove the center hub nut with an impact wrench and air blow gun
    • Remove the three 15mm hub bolts with two 15mm wrenches
    • Twist the hub nut a quarter of the way
    • And hammer from the back of the hub
    • Remove the hub nut and pull the hub out
  5. step : Installing the New Hub (5:06)
    • Place the backing plate onto the hub
    • Push the hub back into place
    • Insert and tighten the 15mm hub bolts
    • Torque the 15mm hub bolts to 75 ft/lbs
    • Remove the clip and feed the ABS harness back into place
    • Replace the clips and brackets to the ABS harness
    • Replace center hub nut and washer
    • Tighten the center hub nut
  6. step : Replacing the Caliper Bracket (6:46)
    • Place the rotor on the hub
    • Twist a lug nut to hold the rotor in place
    • Put the caliper on
    • Replace and tighten the 18mm bolts
    • Torque the 18mm bolts to 75 ft/lbs
    • Install the new brake pads into the bracket, tapping lightly with a hammer
    • Grease the caliper bolts
    • Place the caliper onto the bracket
    • Replace and tighten the T55 Torx bolts
    • Torque the bolts to 30 ft/lbs
  7. step : Reinstalling the Wheel (8:46)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the 22mm bolts
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Torque the center hub nut to a 125 ft/lbs
    • Reattach the center cap
  8. step : Testing the Brakes (9:33)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Hex Wrenches

  • 5mm Hex Wrench

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 22mm Socket
  • 35mm Socket

  • Star Drivers & Sockets

  • T55 Torx Socket

  • Wrenches - Metric

  • 15mm Wrench

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is this part a Moog hub bearing?
Roberr S December 17, 2015
I dont think so, after market! Quality matches price!!!
David H December 17, 2015
Sorry I do not know what "Moog" means?
Charles S December 17, 2015
no but good quality been running them for over a year
Mikeal P December 19, 2015
No. I didnt find anywhere on mine where there was any stamping indicating the brand. Still appeared to be a good quality replacement part.
Andrew R December 19, 2015
No, these will be our 1A Auto house brand parts. The axle will have a lifetime warranty, and the bearing will have a 2 year warranty. Thank you and have a great day!
Derek C December 22, 2015
My 2002 GMC Sierra Denali has a 6 bolt flange this unit specifys a 3 bolt flange ?
Robert M January 30, 2016
The wheel hub and bearing have a 3 bolt flange, that is how the whole assembly is connected to the truck.
Juan R January 31, 2016
The only 3 bolt flange i had to deal with is where the hub mated up to the flat part of where the bearing slid through. There were 3 18mm bolts that held these together. I had a 6 bolt pattern where the axle actually bolted into the side of my 4 wheel drivetrain box. Good luck getting the 2 mated surfaces of the hub and the frame apart. Spent a long time there. Didnt have a slide hammer, but a good one may have shortened the job.
Dan K D January 31, 2016
This little different nothing to worry about it match up great
Jeronimo G January 31, 2016
Hello, The hub has a 3 bolt flange and the axle is a 6 bolt flange.
Brian F February 1, 2016
My 03 gmc has 85000 miles drivers side bearing went should I do both sides?
Russell R August 29, 2017
In my experience. Yes saves time replacing. The other side down the road if youre spending time doing one the second is less time because you have done it already so it goes faster... In the end you wont have keep an eye on the other side knowing you just replace both side done . next exhaust...lol it is always something. Good luck.
Rhonda H August 29, 2017
Hey Russel, typically you should change both sides but its not absolutely necessary. If your budget permits, go ahead and change both sides. However, it doesnt really matter. I only changed one side and I havent had any issues. I hope this info helps.
Luis J August 29, 2017
Yes u should do both sides I had this happen an I only did one side within a week of doing the driver side I was doing the passenger side
L L August 29, 2017
Yes I would
Theresa L August 29, 2017
Changer both !
L S July 5, 2018
Is this the same as one for a 3500?
David B November 3, 2017
The 3500 would use separate components. Please view our other listings for the appropriate replacements.
Alex P November 3, 2017

Fits the following Makes:

Year Make Model Description
2002-2006Cadillac Escalade Cadillac Escalade All Wheel Drive Front Driver or Passenger Side CV Axle Shaft 2 Piece Set
2003-2006Cadillac Escalade ESV Cadillac Escalade ESV All Wheel Drive Front Driver or Passenger Side CV Axle Shaft 2 Piece Set
2002-2006Cadillac Escalade EXT Cadillac Escalade EXT All Wheel Drive Front Driver or Passenger Side CV Axle Shaft 2 Piece Set
2002-2006Chevrolet Avalanche 1500 Chevrolet Avalanche 1500 4 Wheel Drive Front Driver or Passenger Side CV Axle Shaft 2 Piece Set
1999-2003Chevrolet Silverado 1500 Chevrolet Silverado 1500 (excluding Crew Cab) 4 Wheel Drive Front Driver or Passenger Side CV Axle Shaft 2 Piece Set
2004-2006Chevrolet Silverado 1500 Chevrolet Silverado 1500 4 Wheel Drive with 6 Lug Wheels Front Driver or Passenger Side CV Axle Shaft 2 Piece Set
2007Chevrolet Silverado 1500 Classic Chevrolet Silverado 1500 Classic 4 Wheel Drive with 6 Lug Wheels Front Driver or Passenger Side CV Axle Shaft 2 Piece Set
2000-2006Chevrolet Suburban 1500 Chevrolet Suburban 1500 4 Wheel Drive Front Driver or Passenger Side CV Axle Shaft 2 Piece Set
2000Chevrolet Tahoe Chevrolet Tahoe 4 Wheel Drive (without Z71 Package) Front Driver or Passenger Side CV Axle Shaft 2 Piece Set
2001-2006Chevrolet Tahoe Chevrolet Tahoe 4 Wheel Drive Front Driver or Passenger Side CV Axle Shaft 2 Piece Set
1999-2003GMC Sierra 1500 GMC Sierra 1500 (excluding Crew Cab) 4 Wheel Drive Front Driver or Passenger Side CV Axle Shaft 2 Piece Set
2004-2006GMC Sierra 1500 GMC Sierra 1500 4 Wheel Drive with 6 Lug Wheels Front Driver or Passenger Side CV Axle Shaft 2 Piece Set
2007GMC Sierra 1500 Classic GMC Sierra 1500 Classic 4 Wheel Drive with 6 Lug Wheels Front Driver or Passenger Side CV Axle Shaft 2 Piece Set
2000GMC Yukon GMC Yukon (excluding Denali Models) 4 Wheel Drive Front Driver or Passenger Side CV Axle Shaft 2 Piece Set
2001-2006GMC Yukon GMC Yukon 4 Wheel Drive Front Driver or Passenger Side CV Axle Shaft 2 Piece Set
2000-2006GMC Yukon XL 1500 GMC Yukon XL 1500 4 Wheel Drive Front Driver or Passenger Side CV Axle Shaft 2 Piece Set

Part Interchange

Brand Label Part Number
ACDelco FW162
ACDelco FW203
ACDelco FW351
ACDelco FW291MX
ACDelco FW278
ACDelco FW311
ACDelco FW291
ACDelco FW282
ACDelco FW147
ACDelco FW311MX
Cardone New 66-1009
Cardone Select 66-1009
Chevrolet 26020730
Chevrolet 26069252
Chevrolet 26069244
Chevrolet 26058932
Chevrolet 26037365
Chevrolet 26062613
Chevrolet 26011961
Chevrolet 26060239
Chicago Rawhide BR930304
Drive Tech America NT515036
GMB 730-0093
GSP NCV10142
General Motors 25840785
General Motors 19103085
General Motors 15102294
General Motors 15740291
General Motors 15134584
General Motors 15863441
General Motors 15233113
General Motors 15112382
General Motors 10393163
General Motors 20804856
General Motors 19209040
General Motors OEM 15863441
General Motors OEM 15740291
General Motors OEM 15102294
General Motors OEM 25840785
General Motors OEM 19209040
General Motors OEM 15112382
General Motors OEM 15134584
General Motors OEM 19103085
General Motors OEM 15233113
General Motors OEM 10393163
General Motors OEM 20804856
MOOG Hub Assemblies 515036
Mevotech H515036
Raybestos 715036
Raybestos Brakes 715036
SKF BTD-5110
SKF BR930304
Timken SP550304
Timken SP500300

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1AAHK00001
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BHA52921